From: Liu Zixian liuzixian4@huawei.com

[ Upstream commit 194d250cdc4a40ccbd179afd522a9e9846957402 ]

drm_cvt_mode may return NULL and we should check it.

This bug is found by syzkaller:

FAULT_INJECTION stacktrace: [ 168.567394] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 [ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567408] Call trace: [ 168.567414] dump_backtrace+0x0/0x310 [ 168.567418] show_stack+0x28/0x38 [ 168.567423] dump_stack+0xec/0x15c [ 168.567427] should_fail+0x3ac/0x3d0 [ 168.567437] __should_failslab+0xb8/0x120 [ 168.567441] should_failslab+0x28/0xc0 [ 168.567445] kmem_cache_alloc_trace+0x50/0x640 [ 168.567454] drm_mode_create+0x40/0x90 [ 168.567458] drm_cvt_mode+0x48/0xc78 [ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu] [ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567492] drm_mode_getconnector+0x2e0/0xa70 [ 168.567496] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567514] drm_ioctl+0x558/0x6d0 [ 168.567522] do_vfs_ioctl+0x160/0xf30 [ 168.567525] ksys_ioctl+0x98/0xd8 [ 168.567530] __arm64_sys_ioctl+0x50/0xc8 [ 168.567536] el0_svc_common+0xc8/0x320 [ 168.567540] el0_svc_handler+0xf8/0x160 [ 168.567544] el0_svc+0x10/0x218

KASAN stacktrace: [ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425 [ 168.567566] [ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567575] Call trace: [ 168.567578] dump_backtrace+0x0/0x310 [ 168.567582] show_stack+0x28/0x38 [ 168.567586] dump_stack+0xec/0x15c [ 168.567591] kasan_report+0x244/0x2f0 [ 168.567594] __asan_load4+0x58/0xb0 [ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567617] drm_mode_getconnector+0x2e0/0xa70 [ 168.567621] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567624] drm_ioctl+0x558/0x6d0 [ 168.567628] do_vfs_ioctl+0x160/0xf30 [ 168.567632] ksys_ioctl+0x98/0xd8 [ 168.567636] __arm64_sys_ioctl+0x50/0xc8 [ 168.567641] el0_svc_common+0xc8/0x320 [ 168.567645] el0_svc_handler+0xf8/0x160 [ 168.567649] el0_svc+0x10/0x218

Signed-off-by: Liu Zixian liuzixian4@huawei.com Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian... Signed-off-by: Gerd Hoffmann kraxel@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/virtio/virtgpu_display.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c index a6caebd4a0dd..ef1f19083cd3 100644 --- a/drivers/gpu/drm/virtio/virtgpu_display.c +++ b/drivers/gpu/drm/virtio/virtgpu_display.c @@ -179,6 +179,8 @@ static int virtio_gpu_conn_get_modes(struct drm_connector *connector) DRM_DEBUG("add mode: %dx%d\n", width, height); mode = drm_cvt_mode(connector->dev, width, height, 60, false, false, false); + if (!mode) + return count; mode->type |= DRM_MODE_TYPE_PREFERRED; drm_mode_probed_add(connector, mode); count++;

From: Quentin Monnet quentin@isovalent.com

[ Upstream commit 4eeebce6ac4ad80ee8243bb847c98e0e55848d47 ]

The script for checking that various lists of types in bpftool remain in sync with the UAPI BPF header uses a regex to parse enum bpf_prog_type. If this enum contains a set of values different from the list of program types in bpftool, it complains.

This script should have reported the addition, some time ago, of the new BPF_PROG_TYPE_SYSCALL, which was not reported to bpftool's program types list. It failed to do so, because it failed to parse that new type from the enum. This is because the new value, in the BPF header, has an explicative comment on the same line, and the regex does not support that.

Let's update the script to support parsing enum values when they have comments on the same line.

Signed-off-by: Quentin Monnet quentin@isovalent.com Signed-off-by: Andrii Nakryiko andrii@kernel.org Link: https://lore.kernel.org/bpf/20220404140944.64744-1-quentin@isovalent.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/bpf/test_bpftool_synctypes.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/test_bpftool_synctypes.py b/tools/testing/selftests/bpf/test_bpftool_synctypes.py index be54b7335a76..5717db4e0862 100755 --- a/tools/testing/selftests/bpf/test_bpftool_synctypes.py +++ b/tools/testing/selftests/bpf/test_bpftool_synctypes.py @@ -172,7 +172,7 @@ class FileExtractor(object): @enum_name: name of the enum to parse """ start_marker = re.compile(f'enum {enum_name} {{\n') - pattern = re.compile('^\s*(BPF_\w+),?$') + pattern = re.compile('^\s*(BPF_\w+),?(\s+/*.**/)?$') end_marker = re.compile('^};') parser = BlockParser(self.reader) parser.search_block(start_marker)

From: Haowen Bai baihaowen@meizu.com

[ Upstream commit 3f6b867559b3d43a7ce1b4799b755e812fc0d503 ]

fix warning reported by smatch: drivers/net/wireless/broadcom/b43legacy/phy.c:1181 b43legacy_phy_lo_b_measure() warn: assigning (-772) to unsigned variable 'fval'

Signed-off-by: Haowen Bai baihaowen@meizu.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/1648203433-8736-1-git-send-email-baihaowen@meizu.c... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/broadcom/b43legacy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43legacy/phy.c b/drivers/net/wireless/broadcom/b43legacy/phy.c index 05404fbd1e70..c1395e622759 100644 --- a/drivers/net/wireless/broadcom/b43legacy/phy.c +++ b/drivers/net/wireless/broadcom/b43legacy/phy.c @@ -1123,7 +1123,7 @@ void b43legacy_phy_lo_b_measure(struct b43legacy_wldev *dev) struct b43legacy_phy *phy = &dev->phy; u16 regstack[12] = { 0 }; u16 mls; - u16 fval; + s16 fval; int i; int j;

From: Haowen Bai baihaowen@meizu.com

[ Upstream commit e8366bbabe1d207cf7c5b11ae50e223ae6fc278b ]

crypt and crypt->ops could be null, so we need to checking null before dereference

Signed-off-by: Haowen Bai baihaowen@meizu.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/1648797055-25730-1-git-send-email-baihaowen@meizu.... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/ipw2x00/libipw_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c index 36d1e6b2568d..4aec1fce1ae2 100644 --- a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c +++ b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c @@ -383,7 +383,7 @@ netdev_tx_t libipw_xmit(struct sk_buff *skb, struct net_device *dev)

/* Each fragment may need to have room for encryption * pre/postfix */ - if (host_encrypt) + if (host_encrypt && crypt && crypt->ops) bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len + crypt->ops->extra_mpdu_postfix_len;

From: Daniel Vetter daniel.vetter@ffwll.ch

[ Upstream commit 43553559121ca90965b572cf8a1d6d0fd618b449 ]

This shouldn't be a problem in practice since until we've actually taken over the console there's nothing we've registered with the console/vt subsystem, so the exit/unbind path that check this can't do the wrong thing. But it's confusing, so fix it by moving it a tad later.

Acked-by: Sam Ravnborg sam@ravnborg.org Signed-off-by: Daniel Vetter daniel.vetter@intel.com Cc: Daniel Vetter daniel@ffwll.ch Cc: Du Cheng ducheng2@gmail.com Cc: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Cc: Claudio Suarez cssk@net-c.es Cc: Thomas Zimmermann tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-14-dani... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/core/fbcon.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index a53c1f6906f0..a25b63b56223 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -3265,6 +3265,9 @@ static void fbcon_register_existing_fbs(struct work_struct *work)

console_lock();

+ deferred_takeover = false; + logo_shown = FBCON_LOGO_DONTSHOW; + for_each_registered_fb(i) fbcon_fb_registered(registered_fb[i]);

@@ -3282,8 +3285,6 @@ static int fbcon_output_notifier(struct notifier_block *nb, pr_info("fbcon: Taking over console\n");

dummycon_unregister_output_notifier(&fbcon_output_nb); - deferred_takeover = false; - logo_shown = FBCON_LOGO_DONTSHOW;

/* We may get called in atomic context */ schedule_work(&fbcon_deferred_takeover_work);

From: "Kirill A. Shutemov" kirill.shutemov@linux.intel.com

[ Upstream commit e2efb6359e620521d1e13f69b2257de8ceaa9475 ]

While running inside virtual machine, the kernel can bypass cache flushing. Changing sleep state in a virtual machine doesn't affect the host system sleep state and cannot lead to data loss.

Before entering sleep states, the ACPI code flushes caches to prevent data loss using the WBINVD instruction. This mechanism is required on bare metal.

But, any use WBINVD inside of a guest is worthless. Changing sleep state in a virtual machine doesn't affect the host system sleep state and cannot lead to data loss, so most hypervisors simply ignore it. Despite this, the ACPI code calls WBINVD unconditionally anyway. It's useless, but also normally harmless.

In TDX guests, though, WBINVD stops being harmless; it triggers a virtualization exception (#VE). If the ACPI cache-flushing WBINVD were left in place, TDX guests would need handling to recover from the exception.

Avoid using WBINVD whenever running under a hypervisor. This both removes the useless WBINVDs and saves TDX from implementing WBINVD handling.

Signed-off-by: Kirill A. Shutemov kirill.shutemov@linux.intel.com Signed-off-by: Dave Hansen dave.hansen@linux.intel.com Reviewed-by: Dave Hansen dave.hansen@linux.intel.com Reviewed-by: Dan Williams dan.j.williams@intel.com Reviewed-by: Thomas Gleixner tglx@linutronix.de Link: https://lkml.kernel.org/r/20220405232939.73860-30-kirill.shutemov@linux.inte... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/acenv.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/acenv.h b/arch/x86/include/asm/acenv.h index 9aff97f0de7f..d937c55e717e 100644 --- a/arch/x86/include/asm/acenv.h +++ b/arch/x86/include/asm/acenv.h @@ -13,7 +13,19 @@

/* Asm macros */

-#define ACPI_FLUSH_CPU_CACHE() wbinvd() +/* + * ACPI_FLUSH_CPU_CACHE() flushes caches on entering sleep states. + * It is required to prevent data loss. + * + * While running inside virtual machine, the kernel can bypass cache flushing. + * Changing sleep state in a virtual machine doesn't affect the host system + * sleep state and cannot lead to data loss. + */ +#define ACPI_FLUSH_CPU_CACHE() \ +do { \ + if (!cpu_feature_enabled(X86_FEATURE_HYPERVISOR)) \ + wbinvd(); \ +} while (0)

int __acpi_acquire_global_lock(unsigned int *lock); int __acpi_release_global_lock(unsigned int *lock);

From: Liviu Dudau liviu.dudau@arm.com

[ Upstream commit c8f76c37cc3668ee45e081e76a15f24a352ebbdd ]

If drm_universal_plane_init() fails early we jump to the common cleanup code that calls komeda_plane_destroy() which in turn could access the uninitalised drm_plane and crash. Return early if an error is detected without going through the common code.

Reported-by: Steven Price steven.price@arm.com Reviewed-by: Steven Price steven.price@arm.com Signed-off-by: Liviu Dudau liviu.dudau@arm.com Link: https://lore.kernel.org/dri-devel/20211203100946.2706922-1-liviu.dudau@arm.c... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/arm/display/komeda/komeda_plane.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c index d63d83800a8a..d646e3ae1a23 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c @@ -275,8 +275,10 @@ static int komeda_plane_add(struct komeda_kms_dev *kms,

komeda_put_fourcc_list(formats);

- if (err) - goto cleanup; + if (err) { + kfree(kplane); + return err; + }

drm_plane_helper_add(plane, &komeda_plane_helper_funcs);

From: Padmanabha Srinivasaiah treasure4paddy@gmail.com

[ Upstream commit f75fd4b9221d93177c50dcfde671b2e907f53e86 ]

While booting secondary CPUs, cpus_read_[lock/unlock] is not keeping online cpumask stable. The transient online mask results in below calltrace.

[ 0.324121] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.346652] Detected PIPT I-cache on CPU2 [ 0.347212] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.377255] Detected PIPT I-cache on CPU3 [ 0.377823] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.379040] ------------[ cut here ]------------ [ 0.383662] WARNING: CPU: 0 PID: 10 at kernel/workqueue.c:3084 __flush_work+0x12c/0x138 [ 0.384850] Modules linked in: [ 0.385403] CPU: 0 PID: 10 Comm: rcu_tasks_rude_ Not tainted 5.17.0-rc3-v8+ #13 [ 0.386473] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 0.387289] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.388308] pc : __flush_work+0x12c/0x138 [ 0.388970] lr : __flush_work+0x80/0x138 [ 0.389620] sp : ffffffc00aaf3c60 [ 0.390139] x29: ffffffc00aaf3d20 x28: ffffffc009c16af0 x27: ffffff80f761df48 [ 0.391316] x26: 0000000000000004 x25: 0000000000000003 x24: 0000000000000100 [ 0.392493] x23: ffffffffffffffff x22: ffffffc009c16b10 x21: ffffffc009c16b28 [ 0.393668] x20: ffffffc009e53861 x19: ffffff80f77fbf40 x18: 00000000d744fcc9 [ 0.394842] x17: 000000000000000b x16: 00000000000001c2 x15: ffffffc009e57550 [ 0.396016] x14: 0000000000000000 x13: ffffffffffffffff x12: 0000000100000000 [ 0.397190] x11: 0000000000000462 x10: ffffff8040258008 x9 : 0000000100000000 [ 0.398364] x8 : 0000000000000000 x7 : ffffffc0093c8bf4 x6 : 0000000000000000 [ 0.399538] x5 : 0000000000000000 x4 : ffffffc00a976e40 x3 : ffffffc00810444c [ 0.400711] x2 : 0000000000000004 x1 : 0000000000000000 x0 : 0000000000000000 [ 0.401886] Call trace: [ 0.402309] __flush_work+0x12c/0x138 [ 0.402941] schedule_on_each_cpu+0x228/0x278 [ 0.403693] rcu_tasks_rude_wait_gp+0x130/0x144 [ 0.404502] rcu_tasks_kthread+0x220/0x254 [ 0.405264] kthread+0x174/0x1ac [ 0.405837] ret_from_fork+0x10/0x20 [ 0.406456] irq event stamp: 102 [ 0.406966] hardirqs last enabled at (101): [<ffffffc0093c8468>] _raw_spin_unlock_irq+0x78/0xb4 [ 0.408304] hardirqs last disabled at (102): [<ffffffc0093b8270>] el1_dbg+0x24/0x5c [ 0.409410] softirqs last enabled at (54): [<ffffffc0081b80c8>] local_bh_enable+0xc/0x2c [ 0.410645] softirqs last disabled at (50): [<ffffffc0081b809c>] local_bh_disable+0xc/0x2c [ 0.411890] ---[ end trace 0000000000000000 ]--- [ 0.413000] smp: Brought up 1 node, 4 CPUs [ 0.413762] SMP: Total of 4 processors activated. [ 0.414566] CPU features: detected: 32-bit EL0 Support [ 0.415414] CPU features: detected: 32-bit EL1 Support [ 0.416278] CPU features: detected: CRC32 instructions [ 0.447021] Callback from call_rcu_tasks_rude() invoked. [ 0.506693] Callback from call_rcu_tasks() invoked.

This commit therefore fixes this issue by applying a single-CPU optimization to the RCU Tasks Rude grace-period process. The key point here is that the purpose of this RCU flavor is to force a schedule on each online CPU since some past event. But the rcu_tasks_rude_wait_gp() function runs in the context of the RCU Tasks Rude's grace-period kthread, so there must already have been a context switch on the current CPU since the call to either synchronize_rcu_tasks_rude() or call_rcu_tasks_rude(). So if there is only a single CPU online, RCU Tasks Rude's grace-period kthread does not need to anything at all.

It turns out that the rcu_tasks_rude_wait_gp() function's call to schedule_on_each_cpu() causes problems during early boot. During that time, there is only one online CPU, namely the boot CPU. Therefore, applying this single-CPU optimization fixes early-boot instances of this problem.

Link: https://lore.kernel.org/lkml/20220210184319.25009-1-treasure4paddy@gmail.com... Suggested-by: Paul E. McKenney paulmck@kernel.org Signed-off-by: Padmanabha Srinivasaiah treasure4paddy@gmail.com Signed-off-by: Paul E. McKenney paulmck@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/rcu/tasks.h | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h index 6591914af486..60c9eacac25b 100644 --- a/kernel/rcu/tasks.h +++ b/kernel/rcu/tasks.h @@ -660,6 +660,9 @@ static void rcu_tasks_be_rude(struct work_struct *work) // Wait for one rude RCU-tasks grace period. static void rcu_tasks_rude_wait_gp(struct rcu_tasks *rtp) { + if (num_online_cpus() <= 1) + return; // Fastpath for only one CPU. + rtp->n_ipis += cpumask_weight(cpu_online_mask); schedule_on_each_cpu(rcu_tasks_be_rude); }

From: Haowen Bai baihaowen@meizu.com

[ Upstream commit b8ff3395fbdf3b79a99d0ef410fc34c51044121e ]

fix warning reported by smatch: 251 drivers/net/ethernet/sfc/ef10.c:2259 efx_ef10_tx_tso_desc() warn: assigning (-208) to unsigned variable 'ip_tot_len'

Signed-off-by: Haowen Bai baihaowen@meizu.com Acked-by: Edward Cree ecree.xilinx@gmail.com Link: https://lore.kernel.org/r/1649640757-30041-1-git-send-email-baihaowen@meizu.... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sfc/ef10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index f5a4d8f4fd11..c1cd1c97f09d 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -2256,7 +2256,7 @@ int efx_ef10_tx_tso_desc(struct efx_tx_queue *tx_queue, struct sk_buff *skb, * guaranteed to satisfy the second as we only attempt TSO if * inner_network_header <= 208. */ - ip_tot_len = -EFX_TSO2_MAX_HDRLEN; + ip_tot_len = 0x10000 - EFX_TSO2_MAX_HDRLEN; EFX_WARN_ON_ONCE_PARANOID(mss + EFX_TSO2_MAX_HDRLEN + (tcp->doff << 2u) > ip_tot_len);

From: Po-Hao Huang phhuang@realtek.com

[ Upstream commit ece31c93d4d68f7eb8eea4431b052aacdb678de2 ]

RSSI value per frame is reported to mac80211 but not maintained in our own statistics, add it back to help us debug.

Signed-off-by: Po-Hao Huang phhuang@realtek.com Signed-off-by: Ping-Ke Shih pkshih@realtek.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20220407095858.46807-7-pkshih@realtek.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtw88/rtw8821c.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.c b/drivers/net/wireless/realtek/rtw88/rtw8821c.c index 785b8181513f..f405f42d1c1b 100644 --- a/drivers/net/wireless/realtek/rtw88/rtw8821c.c +++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.c @@ -506,6 +506,7 @@ static s8 get_cck_rx_pwr(struct rtw_dev *rtwdev, u8 lna_idx, u8 vga_idx) static void query_phy_status_page0(struct rtw_dev *rtwdev, u8 *phy_status, struct rtw_rx_pkt_stat *pkt_stat) { + struct rtw_dm_info *dm_info = &rtwdev->dm_info; s8 rx_power; u8 lna_idx = 0; u8 vga_idx = 0; @@ -517,6 +518,7 @@ static void query_phy_status_page0(struct rtw_dev *rtwdev, u8 *phy_status,

pkt_stat->rx_power[RF_PATH_A] = rx_power; pkt_stat->rssi = rtw_phy_rf_power_2_rssi(pkt_stat->rx_power, 1); + dm_info->rssi[RF_PATH_A] = pkt_stat->rssi; pkt_stat->bw = RTW_CHANNEL_WIDTH_20; pkt_stat->signal_power = rx_power; } @@ -524,6 +526,7 @@ static void query_phy_status_page0(struct rtw_dev *rtwdev, u8 *phy_status, static void query_phy_status_page1(struct rtw_dev *rtwdev, u8 *phy_status, struct rtw_rx_pkt_stat *pkt_stat) { + struct rtw_dm_info *dm_info = &rtwdev->dm_info; u8 rxsc, bw; s8 min_rx_power = -120;

@@ -543,6 +546,7 @@ static void query_phy_status_page1(struct rtw_dev *rtwdev, u8 *phy_status,

pkt_stat->rx_power[RF_PATH_A] = GET_PHY_STAT_P1_PWDB_A(phy_status) - 110; pkt_stat->rssi = rtw_phy_rf_power_2_rssi(pkt_stat->rx_power, 1); + dm_info->rssi[RF_PATH_A] = pkt_stat->rssi; pkt_stat->bw = bw; pkt_stat->signal_power = max(pkt_stat->rx_power[RF_PATH_A], min_rx_power);

From: Len Brown len.brown@intel.com

[ Upstream commit 6397b6418935773a34b533b3348b03f4ce3d7050 ]

ICX (and its duplicates) require special hard-coded DRAM RAPL units, rather than using the generic RAPL energy units.

Reported-by: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Signed-off-by: Len Brown len.brown@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/power/x86/turbostat/turbostat.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 47d3ba895d6d..4f176bbf29f4 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4376,6 +4376,7 @@ static double rapl_dram_energy_units_probe(int model, double rapl_energy_units) case INTEL_FAM6_BROADWELL_X: /* BDX */ case INTEL_FAM6_SKYLAKE_X: /* SKX */ case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ + case INTEL_FAM6_ICELAKE_X: /* ICX */ return (rapl_dram_energy_units = 15.3 / 1000000); default: return (rapl_energy_units);

From: James Smart jsmart2021@gmail.com

[ Upstream commit 03cbbd7c2f5ee288f648f4aeedc765a181188553 ]

During stress I/O tests with 500+ vports, hard LOCKUP call traces are observed.

CPU A: native_queued_spin_lock_slowpath+0x192 _raw_spin_lock_irqsave+0x32 lpfc_handle_fcp_err+0x4c6 lpfc_fcp_io_cmd_wqe_cmpl+0x964 lpfc_sli4_fp_handle_cqe+0x266 __lpfc_sli4_process_cq+0x105 __lpfc_sli4_hba_process_cq+0x3c lpfc_cq_poll_hdler+0x16 irq_poll_softirq+0x76 __softirqentry_text_start+0xe4 irq_exit+0xf7 do_IRQ+0x7f

CPU B: native_queued_spin_lock_slowpath+0x5b _raw_spin_lock+0x1c lpfc_abort_handler+0x13e scmd_eh_abort_handler+0x85 process_one_work+0x1a7 worker_thread+0x30 kthread+0x112 ret_from_fork+0x1f

Diagram of lockup:

CPUA CPUB ---- ---- lpfc_cmd->buf_lock phba->hbalock lpfc_cmd->buf_lock phba->hbalock

Fix by reordering the taking of the lpfc_cmd->buf_lock and phba->hbalock in lpfc_abort_handler routine so that it tries to take the lpfc_cmd->buf_lock first before phba->hbalock.

Link: https://lore.kernel.org/r/20220412222008.126521-7-jsmart2021@gmail.com Co-developed-by: Justin Tee justin.tee@broadcom.com Signed-off-by: Justin Tee justin.tee@broadcom.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc_scsi.c | 33 +++++++++++++++------------------ 1 file changed, 15 insertions(+), 18 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 3d9175f1b678..8c79264a935b 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -5885,25 +5885,25 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) if (!lpfc_cmd) return ret;

- spin_lock_irqsave(&phba->hbalock, flags); + /* Guard against IO completion being called at same time */ + spin_lock_irqsave(&lpfc_cmd->buf_lock, flags); + + spin_lock(&phba->hbalock); /* driver queued commands are in process of being flushed */ if (phba->hba_flag & HBA_IOQ_FLUSH) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, "3168 SCSI Layer abort requested I/O has been " "flushed by LLD.\n"); ret = FAILED; - goto out_unlock; + goto out_unlock_hba; }

- /* Guard against IO completion being called at same time */ - spin_lock(&lpfc_cmd->buf_lock); - if (!lpfc_cmd->pCmd) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, "2873 SCSI Layer I/O Abort Request IO CMPL Status " "x%x ID %d LUN %llu\n", SUCCESS, cmnd->device->id, cmnd->device->lun); - goto out_unlock_buf; + goto out_unlock_hba; }

iocb = &lpfc_cmd->cur_iocbq; @@ -5911,7 +5911,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) pring_s4 = phba->sli4_hba.hdwq[iocb->hba_wqidx].io_wq->pring; if (!pring_s4) { ret = FAILED; - goto out_unlock_buf; + goto out_unlock_hba; } spin_lock(&pring_s4->ring_lock); } @@ -5944,8 +5944,8 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) "3389 SCSI Layer I/O Abort Request is pending\n"); if (phba->sli_rev == LPFC_SLI_REV4) spin_unlock(&pring_s4->ring_lock); - spin_unlock(&lpfc_cmd->buf_lock); - spin_unlock_irqrestore(&phba->hbalock, flags); + spin_unlock(&phba->hbalock); + spin_unlock_irqrestore(&lpfc_cmd->buf_lock, flags); goto wait_for_cmpl; }

@@ -5966,15 +5966,13 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) if (ret_val != IOCB_SUCCESS) { /* Indicate the IO is not being aborted by the driver. */ lpfc_cmd->waitq = NULL; - spin_unlock(&lpfc_cmd->buf_lock); - spin_unlock_irqrestore(&phba->hbalock, flags); ret = FAILED; - goto out; + goto out_unlock_hba; }

/* no longer need the lock after this point */ - spin_unlock(&lpfc_cmd->buf_lock); - spin_unlock_irqrestore(&phba->hbalock, flags); + spin_unlock(&phba->hbalock); + spin_unlock_irqrestore(&lpfc_cmd->buf_lock, flags);

if (phba->cfg_poll & DISABLE_FCP_RING_INT) lpfc_sli_handle_fast_ring_event(phba, @@ -6009,10 +6007,9 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) out_unlock_ring: if (phba->sli_rev == LPFC_SLI_REV4) spin_unlock(&pring_s4->ring_lock); -out_unlock_buf: - spin_unlock(&lpfc_cmd->buf_lock); -out_unlock: - spin_unlock_irqrestore(&phba->hbalock, flags); +out_unlock_hba: + spin_unlock(&phba->hbalock); + spin_unlock_irqrestore(&lpfc_cmd->buf_lock, flags); out: lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, "0749 SCSI Layer I/O Abort Request Status x%x ID %d "

From: Ulf Hansson ulf.hansson@linaro.org

[ Upstream commit 171b66e2e2e9d80b93c8cff799e6175074b22297 ]

When PSCI OSI mode is supported the syscore flag is set for the CPU devices that becomes attached to their PM domains (genpds). In the suspend-to-idle case, we call dev_pm_genpd_suspend|resume() to allow genpd to properly manage the power-off/on operations (pick an idlestate and manage the on/off notifications).

For suspend-to-ram, dev_pm_genpd_suspend|resume() is currently not being called, which causes a problem that the genpd on/off notifiers do not get sent as expected. This prevents the platform-specific operations from being executed, typically needed just before/after the boot CPU is being turned off/on.

To deal with this problem, let's register a syscore ops for cpuidle-psci when PSCI OSI mode is being used and call dev_pm_genpd_suspend|resume() from them. In this way, genpd regains control of the PM domain topology and then sends the on/off notifications when it's appropriate.

Reported-by: Maulik Shah quic_mkshah@quicinc.com Suggested-by: Maulik Shah quic_mkshah@quicinc.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Tested-by: Maulik Shah quic_mkshah@quicinc.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cpuidle/cpuidle-psci.c | 46 ++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+)

diff --git a/drivers/cpuidle/cpuidle-psci.c b/drivers/cpuidle/cpuidle-psci.c index b51b5df08450..540105ca0781 100644 --- a/drivers/cpuidle/cpuidle-psci.c +++ b/drivers/cpuidle/cpuidle-psci.c @@ -23,6 +23,7 @@ #include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/syscore_ops.h>

#include <asm/cpuidle.h>

@@ -131,6 +132,49 @@ static int psci_idle_cpuhp_down(unsigned int cpu) return 0; }

+static void psci_idle_syscore_switch(bool suspend) +{ + bool cleared = false; + struct device *dev; + int cpu; + + for_each_possible_cpu(cpu) { + dev = per_cpu_ptr(&psci_cpuidle_data, cpu)->dev; + + if (dev && suspend) { + dev_pm_genpd_suspend(dev); + } else if (dev) { + dev_pm_genpd_resume(dev); + + /* Account for userspace having offlined a CPU. */ + if (pm_runtime_status_suspended(dev)) + pm_runtime_set_active(dev); + + /* Clear domain state to re-start fresh. */ + if (!cleared) { + psci_set_domain_state(0); + cleared = true; + } + } + } +} + +static int psci_idle_syscore_suspend(void) +{ + psci_idle_syscore_switch(true); + return 0; +} + +static void psci_idle_syscore_resume(void) +{ + psci_idle_syscore_switch(false); +} + +static struct syscore_ops psci_idle_syscore_ops = { + .suspend = psci_idle_syscore_suspend, + .resume = psci_idle_syscore_resume, +}; + static void psci_idle_init_cpuhp(void) { int err; @@ -138,6 +182,8 @@ static void psci_idle_init_cpuhp(void) if (!psci_cpuidle_use_cpuhp) return;

+ register_syscore_ops(&psci_idle_syscore_ops); + err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING, "cpuidle/psci:online", psci_idle_cpuhp_up,

From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com

[ Upstream commit b1384d4c95088d01f4266237faabf165d3d605fc ]

commit cfb7b8bf1e2d66 ("ASoC: rsnd: tidyup rsnd_ssiu_busif_err_status_clear()") merged duplicate code, but it didn't care about default case, and causes smatch warnings.

smatch warnings: sound/soc/sh/rcar/ssiu.c:112 rsnd_ssiu_busif_err_status_clear() \ error: uninitialized symbol 'offset'. sound/soc/sh/rcar/ssiu.c:114 rsnd_ssiu_busif_err_status_clear() \ error: uninitialized symbol 'shift'.

This patch cares it.

Reported-by: kernel test robot lkp@intel.com Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87r15rgn6p.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sh/rcar/ssiu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssiu.c b/sound/soc/sh/rcar/ssiu.c index 0d8f97633dd2..138f95dd9f4a 100644 --- a/sound/soc/sh/rcar/ssiu.c +++ b/sound/soc/sh/rcar/ssiu.c @@ -102,6 +102,8 @@ bool rsnd_ssiu_busif_err_status_clear(struct rsnd_mod *mod) shift = 1; offset = 1; break; + default: + goto out; }

for (i = 0; i < 4; i++) { @@ -120,7 +122,7 @@ bool rsnd_ssiu_busif_err_status_clear(struct rsnd_mod *mod) } rsnd_mod_write(mod, reg, val); } - +out: return error; }

From: Thibaut VARÈNE hacks+kernel@slashdirt.org

[ Upstream commit e999a5da28a0e0f7de242d841ef7d5e48f4646ae ]

This patch fixes an invalid TX PA DC bias level on QCA9561, which results in a very low output power and very low throughput as devices are further away from the AP (compared to other 2.4GHz APs).

This patch was suggested by Felix Fietkau, who noted[1]: "The value written to that register is wrong, because while the mask definition AR_CH0_TOP2_XPABIASLVL uses a different value for 9561, the shift definition AR_CH0_TOP2_XPABIASLVL_S is hardcoded to 12, which is wrong for 9561."

In real life testing, without this patch the 2.4GHz throughput on Yuncore XD3200 is around 10Mbps sitting next to the AP, and closer to practical maximum with the patch applied.

[1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name

Signed-off-by: Thibaut VARÈNE hacks+kernel@slashdirt.org Acked-by: Felix Fietkau nbd@nbd.name Acked-by: Toke Høiland-Jørgensen toke@toke.dk Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20220417145145.1847-1-hacks+kernel@slashdirt.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index a171dbb29fbb..ad949eb02f3d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -720,7 +720,7 @@ #define AR_CH0_TOP2 (AR_SREV_9300(ah) ? 0x1628c : \ (AR_SREV_9462(ah) ? 0x16290 : 0x16284)) #define AR_CH0_TOP2_XPABIASLVL (AR_SREV_9561(ah) ? 0x1e00 : 0xf000) -#define AR_CH0_TOP2_XPABIASLVL_S 12 +#define AR_CH0_TOP2_XPABIASLVL_S (AR_SREV_9561(ah) ? 9 : 12)

#define AR_CH0_XTAL (AR_SREV_9300(ah) ? 0x16294 : \ ((AR_SREV_9462(ah) || AR_SREV_9565(ah)) ? 0x16298 : \

From: Zheyu Ma zheyuma97@gmail.com

[ Upstream commit e8123311cf06d7dae71e8c5fe78e0510d20cd30b ]

When the driver fails to call the dma_set_mask(), the driver will get the following splat:

[ 55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240 [ 55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590 [ 55.856822] Call Trace: [ 55.860327] __process_removed_driver+0x3c/0x240 [ 55.861347] bus_for_each_dev+0x102/0x160 [ 55.861681] i2c_del_driver+0x2f/0x50

This is because the driver has initialized the i2c related resources in cx23885_dev_setup() but not released them in error handling, fix this bug by modifying the error path that jumps after failing to call the dma_set_mask().

Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/cx23885/cx23885-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c index f8f2ff3b00c3..a07b18f2034e 100644 --- a/drivers/media/pci/cx23885/cx23885-core.c +++ b/drivers/media/pci/cx23885/cx23885-core.c @@ -2165,7 +2165,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev, err = dma_set_mask(&pci_dev->dev, 0xffffffff); if (err) { pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); - goto fail_ctrl; + goto fail_dma_set_mask; }

err = request_irq(pci_dev->irq, cx23885_irq, @@ -2173,7 +2173,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev, if (err < 0) { pr_err("%s: can't get IRQ %d\n", dev->name, pci_dev->irq); - goto fail_irq; + goto fail_dma_set_mask; }

switch (dev->board) { @@ -2195,7 +2195,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev,

return 0;

-fail_irq: +fail_dma_set_mask: cx23885_dev_unregister(dev); fail_ctrl: v4l2_ctrl_handler_free(hdl);

From: Heming Zhao heming.zhao@suse.com

[ Upstream commit e68cb83a57a458b01c9739e2ad9cb70b04d1e6d2 ]

If bitmap area contains invalid data, kernel will crash then mdadm triggers "Segmentation fault". This is cluster-md speical bug. In non-clustered env, mdadm will handle broken metadata case. In clustered array, only kernel space handles bitmap slot info. But even this bug only happened in clustered env, current sanity check is wrong, the code should be changed.

How to trigger: (faulty injection)

dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sda dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sdb mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb mdadm -Ss echo aaa > magic.txt == below modifying slot 2 bitmap data == dd if=magic.txt of=/dev/sda seek=16384 bs=1 count=3 <== destroy magic dd if=/dev/zero of=/dev/sda seek=16436 bs=1 count=4 <== ZERO chunksize mdadm -A /dev/md0 /dev/sda /dev/sdb == kernel crashes. mdadm outputs "Segmentation fault" ==

Reason of kernel crash:

In md_bitmap_read_sb (called by md_bitmap_create), bad bitmap magic didn't block chunksize assignment, and zero value made DIV_ROUND_UP_SECTOR_T() trigger "divide error".

Crash log:

kernel: md: md0 stopped. kernel: md/raid1:md0: not clean -- starting background reconstruction kernel: md/raid1:md0: active with 2 out of 2 mirrors kernel: dlm: ... ... kernel: md-cluster: Joined cluster 44810aba-38bb-e6b8-daca-bc97a0b254aa slot 1 kernel: md0: invalid bitmap file superblock: bad magic kernel: md_bitmap_copy_from_slot can't get bitmap from slot 2 kernel: md-cluster: Could not gather bitmaps from slot 2 kernel: divide error: 0000 [#1] SMP NOPTI kernel: CPU: 0 PID: 1603 Comm: mdadm Not tainted 5.14.6-1-default kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod] kernel: RSP: 0018:ffffc22ac0843ba0 EFLAGS: 00010246 kernel: ... ... kernel: Call Trace: kernel: ? dlm_lock_sync+0xd0/0xd0 [md_cluster 77fe..7a0] kernel: md_bitmap_copy_from_slot+0x2c/0x290 [md_mod 24ea..d3a] kernel: load_bitmaps+0xec/0x210 [md_cluster 77fe..7a0] kernel: md_bitmap_load+0x81/0x1e0 [md_mod 24ea..d3a] kernel: do_md_run+0x30/0x100 [md_mod 24ea..d3a] kernel: md_ioctl+0x1290/0x15a0 [md_mod 24ea....d3a] kernel: ? mddev_unlock+0xaa/0x130 [md_mod 24ea..d3a] kernel: ? blkdev_ioctl+0xb1/0x2b0 kernel: block_ioctl+0x3b/0x40 kernel: __x64_sys_ioctl+0x7f/0xb0 kernel: do_syscall_64+0x59/0x80 kernel: ? exit_to_user_mode_prepare+0x1ab/0x230 kernel: ? syscall_exit_to_user_mode+0x18/0x40 kernel: ? do_syscall_64+0x69/0x80 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae kernel: RIP: 0033:0x7f4a15fa722b kernel: ... ... kernel: ---[ end trace 8afa7612f559c868 ]--- kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod]

Reported-by: kernel test robot lkp@intel.com Reported-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Guoqing Jiang guoqing.jiang@linux.dev Signed-off-by: Heming Zhao heming.zhao@suse.com Signed-off-by: Song Liu song@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/md-bitmap.c | 44 ++++++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 21 deletions(-)

diff --git a/drivers/md/md-bitmap.c b/drivers/md/md-bitmap.c index e29c6298ef5c..8cc11b1987ec 100644 --- a/drivers/md/md-bitmap.c +++ b/drivers/md/md-bitmap.c @@ -639,14 +639,6 @@ static int md_bitmap_read_sb(struct bitmap *bitmap) daemon_sleep = le32_to_cpu(sb->daemon_sleep) * HZ; write_behind = le32_to_cpu(sb->write_behind); sectors_reserved = le32_to_cpu(sb->sectors_reserved); - /* Setup nodes/clustername only if bitmap version is - * cluster-compatible - */ - if (sb->version == cpu_to_le32(BITMAP_MAJOR_CLUSTERED)) { - nodes = le32_to_cpu(sb->nodes); - strlcpy(bitmap->mddev->bitmap_info.cluster_name, - sb->cluster_name, 64); - }

/* verify that the bitmap-specific fields are valid */ if (sb->magic != cpu_to_le32(BITMAP_MAGIC)) @@ -668,6 +660,16 @@ static int md_bitmap_read_sb(struct bitmap *bitmap) goto out; }

+ /* + * Setup nodes/clustername only if bitmap version is + * cluster-compatible + */ + if (sb->version == cpu_to_le32(BITMAP_MAJOR_CLUSTERED)) { + nodes = le32_to_cpu(sb->nodes); + strlcpy(bitmap->mddev->bitmap_info.cluster_name, + sb->cluster_name, 64); + } + /* keep the array size field of the bitmap superblock up to date */ sb->sync_size = cpu_to_le64(bitmap->mddev->resync_max_sectors);

@@ -700,9 +702,9 @@ static int md_bitmap_read_sb(struct bitmap *bitmap)

out: kunmap_atomic(sb); - /* Assigning chunksize is required for "re_read" */ - bitmap->mddev->bitmap_info.chunksize = chunksize; if (err == 0 && nodes && (bitmap->cluster_slot < 0)) { + /* Assigning chunksize is required for "re_read" */ + bitmap->mddev->bitmap_info.chunksize = chunksize; err = md_setup_cluster(bitmap->mddev, nodes); if (err) { pr_warn("%s: Could not setup cluster service (%d)\n", @@ -713,18 +715,18 @@ static int md_bitmap_read_sb(struct bitmap *bitmap) goto re_read; }

- out_no_sb: - if (test_bit(BITMAP_STALE, &bitmap->flags)) - bitmap->events_cleared = bitmap->mddev->events; - bitmap->mddev->bitmap_info.chunksize = chunksize; - bitmap->mddev->bitmap_info.daemon_sleep = daemon_sleep; - bitmap->mddev->bitmap_info.max_write_behind = write_behind; - bitmap->mddev->bitmap_info.nodes = nodes; - if (bitmap->mddev->bitmap_info.space == 0 || - bitmap->mddev->bitmap_info.space > sectors_reserved) - bitmap->mddev->bitmap_info.space = sectors_reserved; - if (err) { + if (err == 0) { + if (test_bit(BITMAP_STALE, &bitmap->flags)) + bitmap->events_cleared = bitmap->mddev->events; + bitmap->mddev->bitmap_info.chunksize = chunksize; + bitmap->mddev->bitmap_info.daemon_sleep = daemon_sleep; + bitmap->mddev->bitmap_info.max_write_behind = write_behind; + bitmap->mddev->bitmap_info.nodes = nodes; + if (bitmap->mddev->bitmap_info.space == 0 || + bitmap->mddev->bitmap_info.space > sectors_reserved) + bitmap->mddev->bitmap_info.space = sectors_reserved; + } else { md_bitmap_print_sb(bitmap); if (bitmap->cluster_slot < 0) md_cluster_stop(bitmap->mddev);

From: Vignesh Raghavendra vigneshr@ti.com

[ Upstream commit c7666240ec76422cb7546bd07cc8ae80dc0ccdd2 ]

The ARASAN MMC controller on Keystone 3 class of devices need the SDCD line to be connected for proper functioning. Similar to the issue pointed out in sdhci-of-arasan.c driver, commit 3794c542641f ("mmc: sdhci-of-arasan: Set controller to test mode when no CD bit").

In cases where this can't be connected, add a quirk to force the controller into test mode and set the TESTCD bit. Use the flag "ti,fails-without-test-cd", to implement this above quirk when required.

Signed-off-by: Vignesh Raghavendra vigneshr@ti.com Signed-off-by: Aswath Govindraju a-govindraju@ti.com Link: https://lore.kernel.org/r/20220425063120.10135-3-a-govindraju@ti.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/sdhci_am654.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c index b4891bb26648..a3e62e212631 100644 --- a/drivers/mmc/host/sdhci_am654.c +++ b/drivers/mmc/host/sdhci_am654.c @@ -147,6 +147,9 @@ struct sdhci_am654_data { int drv_strength; int strb_sel; u32 flags; + u32 quirks; + +#define SDHCI_AM654_QUIRK_FORCE_CDTEST BIT(0) };

struct sdhci_am654_driver_data { @@ -369,6 +372,21 @@ static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg) } }

+static void sdhci_am654_reset(struct sdhci_host *host, u8 mask) +{ + u8 ctrl; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host); + + sdhci_reset(host, mask); + + if (sdhci_am654->quirks & SDHCI_AM654_QUIRK_FORCE_CDTEST) { + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + ctrl |= SDHCI_CTRL_CDTEST_INS | SDHCI_CTRL_CDTEST_EN; + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + } +} + static int sdhci_am654_execute_tuning(struct mmc_host *mmc, u32 opcode) { struct sdhci_host *host = mmc_priv(mmc); @@ -500,7 +518,7 @@ static struct sdhci_ops sdhci_j721e_4bit_ops = { .set_clock = sdhci_j721e_4bit_set_clock, .write_b = sdhci_am654_write_b, .irq = sdhci_am654_cqhci_irq, - .reset = sdhci_reset, + .reset = sdhci_am654_reset, };

static const struct sdhci_pltfm_data sdhci_j721e_4bit_pdata = { @@ -719,6 +737,9 @@ static int sdhci_am654_get_of_property(struct platform_device *pdev, device_property_read_u32(dev, "ti,clkbuf-sel", &sdhci_am654->clkbuf_sel);

+ if (device_property_read_bool(dev, "ti,fails-without-test-cd")) + sdhci_am654->quirks |= SDHCI_AM654_QUIRK_FORCE_CDTEST; + sdhci_get_of_property(pdev);

return 0;

From: Lv Ruyi lv.ruyi@zte.com.cn

[ Upstream commit c5acd61dbb32b6bda0f3a354108f2b8dcb788985 ]

If major equals 0, register_chrdev() returns an error code when it fails. This function dynamically allocates a major and returns its number on success, so we should use "< 0" to check it instead of "!".

Link: https://lore.kernel.org/r/20220418105755.2558828-1-lv.ruyi@zte.com.cn Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Lv Ruyi lv.ruyi@zte.com.cn Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/megaraid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 56910e94dbf2..7dd6dd74d2bc 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4628,7 +4628,7 @@ static int __init megaraid_init(void) * major number allocation. */ major = register_chrdev(0, "megadev_legacy", &megadev_fops); - if (!major) { + if (major < 0) { printk(KERN_WARNING "megaraid: failed to register char device\n"); }

From: Minghao Chi chi.minghao@zte.com.cn

[ Upstream commit 75b8715e20a20bc7b4844835e4035543a2674200 ]

Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync() and pm_runtime_put_noidle(). This change is just to simplify the code, no actual functional changes.

Link: https://lore.kernel.org/r/20220420090353.2588804-1-chi.minghao@zte.com.cn Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Minghao Chi chi.minghao@zte.com.cn Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ti-j721e-ufs.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ufs/ti-j721e-ufs.c b/drivers/scsi/ufs/ti-j721e-ufs.c index eafe0db98d54..122d650d0810 100644 --- a/drivers/scsi/ufs/ti-j721e-ufs.c +++ b/drivers/scsi/ufs/ti-j721e-ufs.c @@ -29,11 +29,9 @@ static int ti_j721e_ufs_probe(struct platform_device *pdev) return PTR_ERR(regbase);

pm_runtime_enable(dev); - ret = pm_runtime_get_sync(dev); - if (ret < 0) { - pm_runtime_put_noidle(dev); + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) goto disable_pm; - }

/* Select MPHY refclk frequency */ clk = devm_clk_get(dev, NULL);

From: Hari Chandrakanthan quic_haric@quicinc.com

[ Upstream commit 161c64de239c7018e0295e7e0520a19f00aa32dc ]

When ath11k modules are removed using rmmod with spectral scan enabled, crash is observed. Different crash trace is observed for each crash.

Send spectral scan disable WMI command to firmware before cleaning the spectral dbring in the spectral_deinit API to avoid this crash.

call trace from one of the crash observed: [ 1252.880802] Unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 1252.882722] pgd = 0f42e886 [ 1252.890955] [00000008] *pgd=00000000 [ 1252.893478] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 1253.093035] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.89 #0 [ 1253.115261] Hardware name: Generic DT based system [ 1253.121149] PC is at ath11k_spectral_process_data+0x434/0x574 [ath11k] [ 1253.125940] LR is at 0x88e31017 [ 1253.132448] pc : [<7f9387b8>] lr : [<88e31017>] psr: a0000193 [ 1253.135488] sp : 80d01bc8 ip : 00000001 fp : 970e0000 [ 1253.141737] r10: 88e31000 r9 : 970ec000 r8 : 00000080 [ 1253.146946] r7 : 94734040 r6 : a0000113 r5 : 00000057 r4 : 00000000 [ 1253.152159] r3 : e18cb694 r2 : 00000217 r1 : 1df1f000 r0 : 00000001 [ 1253.158755] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1253.165266] Control: 10c0383d Table: 5e71006a DAC: 00000055 [ 1253.172472] Process swapper/0 (pid: 0, stack limit = 0x60870141) [ 1253.458055] [<7f9387b8>] (ath11k_spectral_process_data [ath11k]) from [<7f917fdc>] (ath11k_dbring_buffer_release_event+0x214/0x2e4 [ath11k]) [ 1253.466139] [<7f917fdc>] (ath11k_dbring_buffer_release_event [ath11k]) from [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx+0x1840/0x29cc [ath11k]) [ 1253.478807] [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx [ath11k]) from [<7f8fe868>] (ath11k_htc_rx_completion_handler+0x180/0x4e0 [ath11k]) [ 1253.490699] [<7f8fe868>] (ath11k_htc_rx_completion_handler [ath11k]) from [<7f91308c>] (ath11k_ce_per_engine_service+0x2c4/0x3b4 [ath11k]) [ 1253.502386] [<7f91308c>] (ath11k_ce_per_engine_service [ath11k]) from [<7f9a4198>] (ath11k_pci_ce_tasklet+0x28/0x80 [ath11k_pci]) [ 1253.514811] [<7f9a4198>] (ath11k_pci_ce_tasklet [ath11k_pci]) from [<8032227c>] (tasklet_action_common.constprop.2+0x64/0xe8) [ 1253.526476] [<8032227c>] (tasklet_action_common.constprop.2) from [<803021e8>] (__do_softirq+0x130/0x2d0) [ 1253.537756] [<803021e8>] (__do_softirq) from [<80322610>] (irq_exit+0xcc/0xe8) [ 1253.547304] [<80322610>] (irq_exit) from [<8036a4a4>] (__handle_domain_irq+0x60/0xb4) [ 1253.554428] [<8036a4a4>] (__handle_domain_irq) from [<805eb348>] (gic_handle_irq+0x4c/0x90) [ 1253.562321] [<805eb348>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c)

Tested-on: QCN6122 hw1.0 AHB WLAN.HK.2.6.0.1-00851-QCAHKSWPL_SILICONZ-1

Signed-off-by: Hari Chandrakanthan quic_haric@quicinc.com Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/1649396345-349-1-git-send-email-quic_haric@quicinc... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/spectral.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/spectral.c b/drivers/net/wireless/ath/ath11k/spectral.c index 1afe67759659..e5af9358e610 100644 --- a/drivers/net/wireless/ath/ath11k/spectral.c +++ b/drivers/net/wireless/ath/ath11k/spectral.c @@ -214,7 +214,10 @@ static int ath11k_spectral_scan_config(struct ath11k *ar, return -ENODEV;

arvif->spectral_enabled = (mode != ATH11K_SPECTRAL_DISABLED); + + spin_lock_bh(&ar->spectral.lock); ar->spectral.mode = mode; + spin_unlock_bh(&ar->spectral.lock);

ret = ath11k_wmi_vdev_spectral_enable(ar, arvif->vdev_id, ATH11K_WMI_SPECTRAL_TRIGGER_CMD_CLEAR, @@ -829,9 +832,6 @@ static inline void ath11k_spectral_ring_free(struct ath11k *ar) { struct ath11k_spectral *sp = &ar->spectral;

- if (!sp->enabled) - return; - ath11k_dbring_srng_cleanup(ar, &sp->rx_ring); ath11k_dbring_buf_cleanup(ar, &sp->rx_ring); } @@ -883,15 +883,16 @@ void ath11k_spectral_deinit(struct ath11k_base *ab) if (!sp->enabled) continue;

- ath11k_spectral_debug_unregister(ar); - ath11k_spectral_ring_free(ar); + mutex_lock(&ar->conf_mutex); + ath11k_spectral_scan_config(ar, ATH11K_SPECTRAL_DISABLED); + mutex_unlock(&ar->conf_mutex);

spin_lock_bh(&sp->lock); - - sp->mode = ATH11K_SPECTRAL_DISABLED; sp->enabled = false; - spin_unlock_bh(&sp->lock); + + ath11k_spectral_debug_unregister(ar); + ath11k_spectral_ring_free(ar); } }

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit ce216cfa84a4e1c23b105e652c550bdeaac9e922 ]

Add a quirk for the HP Pro Tablet 408, this BYTCR tablet has no CHAN package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which is the default for BYTCR devices.

It also uses DMIC1 for the internal mic rather then the default IN3 and it uses JD2 rather then the default JD1 for jack-detect.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211485 Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20220427134918.527381-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index a6e837290c7d..f9c82ebc552c 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -759,6 +759,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_OVCD_SF_0P75 | BYT_RT5640_MCLK_EN), }, + { /* HP Pro Tablet 408 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pro Tablet 408"), + }, + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_1500UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* HP Stream 7 */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),

From: Evan Quan evan.quan@amd.com

[ Upstream commit 555238d92ac32dbad2d77ad2bafc48d17391990c ]

Fix the compile warning below: drivers/gpu/drm/amd/amdgpu/../pm/legacy-dpm/kv_dpm.c:1641 kv_get_acp_boot_level() warn: always true condition '(table->entries[i]->clk >= 0) => (0-u32max >= 0)'

Reported-by: kernel test robot lkp@intel.com CC: Alex Deucher alexander.deucher@amd.com Signed-off-by: Evan Quan evan.quan@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c b/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c index bcae42cef374..6ba4c2ae69a6 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c +++ b/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c @@ -1609,19 +1609,7 @@ static int kv_update_samu_dpm(struct amdgpu_device *adev, bool gate)

static u8 kv_get_acp_boot_level(struct amdgpu_device *adev) { - u8 i; - struct amdgpu_clock_voltage_dependency_table *table = - &adev->pm.dpm.dyn_state.acp_clock_voltage_dependency_table; - - for (i = 0; i < table->count; i++) { - if (table->entries[i].clk >= 0) /* XXX */ - break; - } - - if (i >= table->count) - i = table->count - 1; - - return i; + return 0; }

static void kv_update_acp_boot_level(struct amdgpu_device *adev)

From: Alexandru Elisei alexandru.elisei@arm.com

[ Upstream commit 3fed9e551417b84038b15117732ea4505eee386b ]

If a compat process tries to execute an unknown system call above the __ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the offending process. Information about the error is printed to dmesg in compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() -> arm64_show_signal().

arm64_show_signal() interprets a non-zero value for current->thread.fault_code as an exception syndrome and displays the message associated with the ESR_ELx.EC field (bits 31:26). current->thread.fault_code is set in compat_arm_syscall() -> arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx value. This means that the ESR_ELx.EC field has the value that the user set for the syscall number and the kernel can end up printing bogus exception messages*. For example, for the syscall number 0x68000000, which evaluates to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error:

[ 18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000] [ 18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79 [ 18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT) [..]

which is misleading, as the bad compat syscall has nothing to do with pointer authentication.

Stop arm64_show_signal() from printing exception syndrome information by having compat_arm_syscall() set the ESR_ELx value to 0, as it has no meaning for an invalid system call number. The example above now becomes:

[ 19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000] [ 19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80 [ 19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT) [..]

which although shows less information because the syscall number, wrongfully advertised as the ESR value, is missing, it is better than showing plainly wrong information. The syscall number can be easily obtained with strace.

*A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END evaluates to true; the syscall will exit to userspace in this case with the ENOSYS error code instead of arm64_notify_die() being called.

Signed-off-by: Alexandru Elisei alexandru.elisei@arm.com Reviewed-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20220425114444.368693-3-alexandru.elisei@arm.com Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/sys_compat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c index db5159a3055f..b88a52f7188f 100644 --- a/arch/arm64/kernel/sys_compat.c +++ b/arch/arm64/kernel/sys_compat.c @@ -114,6 +114,6 @@ long compat_arm_syscall(struct pt_regs *regs, int scno) addr = instruction_pointer(regs) - (compat_thumb_mode(regs) ? 2 : 4);

arm64_notify_die("Oops - bad compat syscall(2)", regs, - SIGILL, ILL_ILLTRP, addr, scno); + SIGILL, ILL_ILLTRP, addr, 0); return 0; }

From: Xiaoguang Wang xiaoguang.wang@linux.alibaba.com

[ Upstream commit bb9b9eb0ae2e9d3f6036f0ad907c3a83dcd43485 ]

When tcmu_vma_fault() gets a page successfully, before the current context completes page fault procedure, find_free_blocks() may run and call unmap_mapping_range() to unmap the page. Assume that when find_free_blocks() initially completes and the previous page fault procedure starts to run again and completes, then one truncated page has been mapped to userspace. But note that tcmu_vma_fault() has gotten a refcount for the page so any other subsystem won't be able to use the page unless the userspace address is unmapped later.

If another command subsequently runs and needs to extend dbi_thresh it may reuse the corresponding slot for the previous page in data_bitmap. Then though we'll allocate new page for this slot in data_area, no page fault will happen because we have a valid map and the real request's data will be lost.

Filesystem implementations will also run into this issue but they usually lock the page when vm_operations_struct->fault gets a page and unlock the page after finish_fault() completes. For truncate filesystems lock pages in truncate_inode_pages() to protect against racing wrt. page faults.

To fix this possible data corruption scenario we can apply a method similar to the filesystems. For pages that are to be freed, tcmu_blocks_release() locks and unlocks. Make tcmu_vma_fault() also lock found page under cmdr_lock. At the same time, since tcmu_vma_fault() gets an extra page refcount, tcmu_blocks_release() won't free pages if pages are in page fault procedure, which means it is safe to call tcmu_blocks_release() before unmap_mapping_range().

With these changes tcmu_blocks_release() will wait for all page faults to be completed before calling unmap_mapping_range(). And later, if unmap_mapping_range() is called, it will ensure stale mappings are removed.

Link: https://lore.kernel.org/r/20220421023735.9018-1-xiaoguang.wang@linux.alibaba... Reviewed-by: Bodo Stroesser bostroesser@gmail.com Signed-off-by: Xiaoguang Wang xiaoguang.wang@linux.alibaba.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_user.c | 40 ++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-)

diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 0ca5ec14d3db..0173f44b015a 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -20,6 +20,7 @@ #include <linux/configfs.h> #include <linux/mutex.h> #include <linux/workqueue.h> +#include <linux/pagemap.h> #include <net/genetlink.h> #include <scsi/scsi_common.h> #include <scsi/scsi_proto.h> @@ -1667,6 +1668,26 @@ static u32 tcmu_blocks_release(struct tcmu_dev *udev, unsigned long first, xas_lock(&xas); xas_for_each(&xas, page, (last + 1) * udev->data_pages_per_blk - 1) { xas_store(&xas, NULL); + /* + * While reaching here there may be page faults occurring on + * the to-be-released pages. A race condition may occur if + * unmap_mapping_range() is called before page faults on these + * pages have completed; a valid but stale map is created. + * + * If another command subsequently runs and needs to extend + * dbi_thresh, it may reuse the slot corresponding to the + * previous page in data_bitmap. Though we will allocate a new + * page for the slot in data_area, no page fault will happen + * because we have a valid map. Therefore the command's data + * will be lost. + * + * We lock and unlock pages that are to be released to ensure + * all page faults have completed. This way + * unmap_mapping_range() can ensure stale maps are cleanly + * removed. + */ + lock_page(page); + unlock_page(page); __free_page(page); pages_freed++; } @@ -1822,6 +1843,7 @@ static struct page *tcmu_try_get_data_page(struct tcmu_dev *udev, uint32_t dpi) page = xa_load(&udev->data_pages, dpi); if (likely(page)) { get_page(page); + lock_page(page); mutex_unlock(&udev->cmdr_lock); return page; } @@ -1863,6 +1885,7 @@ static vm_fault_t tcmu_vma_fault(struct vm_fault *vmf) struct page *page; unsigned long offset; void *addr; + vm_fault_t ret = 0;

int mi = tcmu_find_mem_index(vmf->vma); if (mi < 0) @@ -1887,10 +1910,11 @@ static vm_fault_t tcmu_vma_fault(struct vm_fault *vmf) page = tcmu_try_get_data_page(udev, dpi); if (!page) return VM_FAULT_SIGBUS; + ret = VM_FAULT_LOCKED; }

vmf->page = page; - return 0; + return ret; }

static const struct vm_operations_struct tcmu_vm_ops = { @@ -3153,12 +3177,22 @@ static void find_free_blocks(void) udev->dbi_max = block; }

+ /* + * Release the block pages. + * + * Also note that since tcmu_vma_fault() gets an extra page + * refcount, tcmu_blocks_release() won't free pages if pages + * are mapped. This means it is safe to call + * tcmu_blocks_release() before unmap_mapping_range() which + * drops the refcount of any pages it unmaps and thus releases + * them. + */ + pages_freed = tcmu_blocks_release(udev, start, end - 1); + /* Here will truncate the data area from off */ off = udev->data_off + (loff_t)start * udev->data_blk_size; unmap_mapping_range(udev->inode->i_mapping, off, 0, 1);

- /* Release the block pages */ - pages_freed = tcmu_blocks_release(udev, start, end - 1); mutex_unlock(&udev->cmdr_lock);

total_pages_freed += pages_freed;

From: Mark Bloch mbloch@nvidia.com

[ Upstream commit 7b0c6338597613f465d131bd939a51844a00455a ]

When an FTE has no children is means all the rules where removed and the FTE can be deleted regardless of the dests_size value. While dests_size should be 0 when there are no children be extra careful not to leak memory or get firmware syndrome if the proper bookkeeping of dests_size wasn't done.

Signed-off-by: Mark Bloch mbloch@nvidia.com Reviewed-by: Maor Gottlieb maorg@nvidia.com Signed-off-by: Saeed Mahameed saeedm@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 00834c914dc6..a197dd7ca73b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -2031,16 +2031,16 @@ void mlx5_del_flow_rules(struct mlx5_flow_handle *handle) down_write_ref_node(&fte->node, false); for (i = handle->num_rules - 1; i >= 0; i--) tree_remove_node(&handle->rule[i]->node, true); - if (fte->dests_size) { - if (fte->modify_mask) - modify_fte(fte); - up_write_ref_node(&fte->node, false); - } else if (list_empty(&fte->node.children)) { + if (list_empty(&fte->node.children)) { del_hw_fte(&fte->node); /* Avoid double call to del_hw_fte */ fte->node.del_hw_func = NULL; up_write_ref_node(&fte->node, false); tree_put_node(&fte->node, false); + } else if (fte->dests_size) { + if (fte->modify_mask) + modify_fte(fte); + up_write_ref_node(&fte->node, false); } else { up_write_ref_node(&fte->node, false); }

From: Petr Machata petrm@nvidia.com

[ Upstream commit b6b584562cbe7dc357083459d6dd5b171e12cadb ]

The idea behind the warnings is that the user would get warned in case when more than one priority is configured for a given DSCP value on a netdevice.

The warning is currently wrong, because dcb_ieee_getapp_mask() returns the first matching entry, not all of them, and the warning will then claim that some priority is "current", when in fact it is not.

But more importantly, the warning is misleading in general. Consider the following commands:

# dcb app flush dev swp19 dscp-prio # dcb app add dev swp19 dscp-prio 24:3 # dcb app replace dev swp19 dscp-prio 24:2

The last command will issue the following warning:

mlxsw_spectrum3 0000:07:00.0 swp19: Ignoring new priority 2 for DSCP 24 in favor of current value of 3

The reason is that the "replace" command works by first adding the new value, and then removing all old values. This is the only way to make the replacement without causing the traffic to be prioritized to whatever the chip defaults to. The warning is issued in response to adding the new priority, and then no warning is shown when the old priority is removed. The upshot is that the canonical way to change traffic prioritization always produces a warning about ignoring the new priority, but what gets configured is in fact what the user intended.

An option to just emit warning every time that the prioritization changes just to make it clear that it happened is obviously unsatisfactory.

Therefore, in this patch, remove the warnings.

Reported-by: Maksym Yaremchuk maksymy@nvidia.com Signed-off-by: Petr Machata petrm@nvidia.com Signed-off-by: Ido Schimmel idosch@nvidia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c | 13 ------------- 1 file changed, 13 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c index 5f92b1691360..aff6d4f35cd2 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c @@ -168,8 +168,6 @@ static int mlxsw_sp_dcbnl_ieee_setets(struct net_device *dev, static int mlxsw_sp_dcbnl_app_validate(struct net_device *dev, struct dcb_app *app) { - int prio; - if (app->priority >= IEEE_8021QAZ_MAX_TCS) { netdev_err(dev, "APP entry with priority value %u is invalid\n", app->priority); @@ -183,17 +181,6 @@ static int mlxsw_sp_dcbnl_app_validate(struct net_device *dev, app->protocol); return -EINVAL; } - - /* Warn about any DSCP APP entries with the same PID. */ - prio = fls(dcb_ieee_getapp_mask(dev, app)); - if (prio--) { - if (prio < app->priority) - netdev_warn(dev, "Choosing priority %d for DSCP %d in favor of previously-active value of %d\n", - app->priority, app->protocol, prio); - else if (prio > app->priority) - netdev_warn(dev, "Ignoring new priority %d for DSCP %d in favor of current value of %d\n", - app->priority, app->protocol, prio); - } break;

case IEEE_8021QAZ_APP_SEL_ETHERTYPE:

From: Alex Deucher alexander.deucher@amd.com

[ Upstream commit b95b5391684b39695887afb4a13cccee7820f5d6 ]

Memory allocations should be done in sw_init. hw_init should just be hardware programming needed to initialize the IP block. This is how most other IP blocks work. Move the GPU memory allocations from psp hw_init to psp sw_init and move the memory free to sw_fini. This also fixes a potential GPU memory leak if psp hw_init fails.

Reviewed-by: Hawking Zhang Hawking.Zhang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 95 ++++++++++++------------- 1 file changed, 47 insertions(+), 48 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c index 86e2090bbd6e..57e9932d8a04 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c @@ -314,7 +314,39 @@ static int psp_sw_init(void *handle) } }

+ ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG, + amdgpu_sriov_vf(adev) ? + AMDGPU_GEM_DOMAIN_VRAM : AMDGPU_GEM_DOMAIN_GTT, + &psp->fw_pri_bo, + &psp->fw_pri_mc_addr, + &psp->fw_pri_buf); + if (ret) + return ret; + + ret = amdgpu_bo_create_kernel(adev, PSP_FENCE_BUFFER_SIZE, PAGE_SIZE, + AMDGPU_GEM_DOMAIN_VRAM, + &psp->fence_buf_bo, + &psp->fence_buf_mc_addr, + &psp->fence_buf); + if (ret) + goto failed1; + + ret = amdgpu_bo_create_kernel(adev, PSP_CMD_BUFFER_SIZE, PAGE_SIZE, + AMDGPU_GEM_DOMAIN_VRAM, + &psp->cmd_buf_bo, &psp->cmd_buf_mc_addr, + (void **)&psp->cmd_buf_mem); + if (ret) + goto failed2; + return 0; + +failed2: + amdgpu_bo_free_kernel(&psp->fw_pri_bo, + &psp->fw_pri_mc_addr, &psp->fw_pri_buf); +failed1: + amdgpu_bo_free_kernel(&psp->fence_buf_bo, + &psp->fence_buf_mc_addr, &psp->fence_buf); + return ret; }

static int psp_sw_fini(void *handle) @@ -344,6 +376,13 @@ static int psp_sw_fini(void *handle) kfree(cmd); cmd = NULL;

+ amdgpu_bo_free_kernel(&psp->fw_pri_bo, + &psp->fw_pri_mc_addr, &psp->fw_pri_buf); + amdgpu_bo_free_kernel(&psp->fence_buf_bo, + &psp->fence_buf_mc_addr, &psp->fence_buf); + amdgpu_bo_free_kernel(&psp->cmd_buf_bo, &psp->cmd_buf_mc_addr, + (void **)&psp->cmd_buf_mem); + return 0; }

@@ -2580,51 +2619,18 @@ static int psp_load_fw(struct amdgpu_device *adev) struct psp_context *psp = &adev->psp;

if (amdgpu_sriov_vf(adev) && amdgpu_in_reset(adev)) { - psp_ring_stop(psp, PSP_RING_TYPE__KM); /* should not destroy ring, only stop */ - goto skip_memalloc; - } - - if (amdgpu_sriov_vf(adev)) { - ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG, - AMDGPU_GEM_DOMAIN_VRAM, - &psp->fw_pri_bo, - &psp->fw_pri_mc_addr, - &psp->fw_pri_buf); + /* should not destroy ring, only stop */ + psp_ring_stop(psp, PSP_RING_TYPE__KM); } else { - ret = amdgpu_bo_create_kernel(adev, PSP_1_MEG, PSP_1_MEG, - AMDGPU_GEM_DOMAIN_GTT, - &psp->fw_pri_bo, - &psp->fw_pri_mc_addr, - &psp->fw_pri_buf); - } - - if (ret) - goto failed; - - ret = amdgpu_bo_create_kernel(adev, PSP_FENCE_BUFFER_SIZE, PAGE_SIZE, - AMDGPU_GEM_DOMAIN_VRAM, - &psp->fence_buf_bo, - &psp->fence_buf_mc_addr, - &psp->fence_buf); - if (ret) - goto failed; - - ret = amdgpu_bo_create_kernel(adev, PSP_CMD_BUFFER_SIZE, PAGE_SIZE, - AMDGPU_GEM_DOMAIN_VRAM, - &psp->cmd_buf_bo, &psp->cmd_buf_mc_addr, - (void **)&psp->cmd_buf_mem); - if (ret) - goto failed; + memset(psp->fence_buf, 0, PSP_FENCE_BUFFER_SIZE);

- memset(psp->fence_buf, 0, PSP_FENCE_BUFFER_SIZE); - - ret = psp_ring_init(psp, PSP_RING_TYPE__KM); - if (ret) { - DRM_ERROR("PSP ring init failed!\n"); - goto failed; + ret = psp_ring_init(psp, PSP_RING_TYPE__KM); + if (ret) { + DRM_ERROR("PSP ring init failed!\n"); + goto failed; + } }

-skip_memalloc: ret = psp_hw_start(psp); if (ret) goto failed; @@ -2730,13 +2736,6 @@ static int psp_hw_fini(void *handle) psp_tmr_terminate(psp); psp_ring_destroy(psp, PSP_RING_TYPE__KM);

- amdgpu_bo_free_kernel(&psp->fw_pri_bo, - &psp->fw_pri_mc_addr, &psp->fw_pri_buf); - amdgpu_bo_free_kernel(&psp->fence_buf_bo, - &psp->fence_buf_mc_addr, &psp->fence_buf); - amdgpu_bo_free_kernel(&psp->cmd_buf_bo, &psp->cmd_buf_mc_addr, - (void **)&psp->cmd_buf_mem); - return 0; }

From: Nícolas F. R. A. Prado nfraprado@collabora.com

[ Upstream commit 6d435a94ba5bb4f2ad381c0828fbae89c66b50fe ]

The MT6315 PMIC dt-binding should enforce that one of the valid regulator-compatible is set in each regulator node. However it was mistakenly matching against regulator-name instead.

Fix the typo. This not only fixes the compatible verification, but also lifts the regulator-name restriction, so that more meaningful names can be set for each platform.

Signed-off-by: Nícolas F. R. A. Prado nfraprado@collabora.com Link: https://lore.kernel.org/r/20220429201325.2205799-1-nfraprado@collabora.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../devicetree/bindings/regulator/mt6315-regulator.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml index 61dd5af80db6..5d2d989de893 100644 --- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml @@ -31,7 +31,7 @@ properties: $ref: "regulator.yaml#"

properties: - regulator-name: + regulator-compatible: pattern: "^vbuck[1-4]$"

additionalProperties: false

From: Zhen Lei thunder.leizhen@huawei.com

[ Upstream commit 8af6b91f58341325bf74ecb0389ddc0039091d84 ]

When "crashkernel=X,high" is used, there may be two crash regions: high=crashk_res and low=crashk_low_res. But now the syscall kexec_file_load() only add crashk_res into "linux,usable-memory-range", this may cause the second kernel to have no available dma memory.

Fix it like kexec-tools does for option -c, add both 'high' and 'low' regions into the dtb.

Signed-off-by: Zhen Lei thunder.leizhen@huawei.com Acked-by: Rob Herring robh@kernel.org Acked-by: Baoquan He bhe@redhat.com Link: https://lore.kernel.org/r/20220506114402.365-6-thunder.leizhen@huawei.com Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/of/kexec.c | 9 +++++++++ 1 file changed, 9 insertions(+)

diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c index 761fd870d1db..72c790a3c910 100644 --- a/drivers/of/kexec.c +++ b/drivers/of/kexec.c @@ -386,6 +386,15 @@ void *of_kexec_alloc_and_setup_fdt(const struct kimage *image, crashk_res.end - crashk_res.start + 1); if (ret) goto out; + + if (crashk_low_res.end) { + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, + "linux,usable-memory-range", + crashk_low_res.start, + crashk_low_res.end - crashk_low_res.start + 1); + if (ret) + goto out; + } }

/* add bootargs */

From: James Smart jsmart2021@gmail.com

[ Upstream commit e6f51041450282a8668af3a8fc5c7744e81a447c ]

When configuring CMF management based on signals instead of FPINs, FPIN alarm and warning statistics are not tracked.

Change the behavior so that FPIN alarms and warnings are always tracked regardless of the configured mode.

Similar changes are made in the CMF signal stat accounting logic. Upon receipt of a signal, only track signaled alarms and warnings. FPIN stats should not be incremented upon receipt of a signal.

Link: https://lore.kernel.org/r/20220506035519.50908-11-jsmart2021@gmail.com Co-developed-by: Justin Tee justin.tee@broadcom.com Signed-off-by: Justin Tee justin.tee@broadcom.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc_els.c | 49 +++++++++++------------------------ drivers/scsi/lpfc/lpfc_init.c | 22 ++-------------- 2 files changed, 17 insertions(+), 54 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 886006ad12a2..ce28c4a30460 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -3777,9 +3777,6 @@ lpfc_least_capable_settings(struct lpfc_hba *phba, { u32 rsp_sig_cap = 0, drv_sig_cap = 0; u32 rsp_sig_freq_cyc = 0, rsp_sig_freq_scale = 0; - struct lpfc_cgn_info *cp; - u32 crc; - u16 sig_freq;

/* Get rsp signal and frequency capabilities. */ rsp_sig_cap = be32_to_cpu(pcgd->xmt_signal_capability); @@ -3835,25 +3832,7 @@ lpfc_least_capable_settings(struct lpfc_hba *phba, } }

- if (!phba->cgn_i) - return; - - /* Update signal frequency in congestion info buffer */ - cp = (struct lpfc_cgn_info *)phba->cgn_i->virt; - - /* Frequency (in ms) Signal Warning/Signal Congestion Notifications - * are received by the HBA - */ - sig_freq = phba->cgn_sig_freq; - - if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY) - cp->cgn_warn_freq = cpu_to_le16(sig_freq); - if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) { - cp->cgn_alarm_freq = cpu_to_le16(sig_freq); - cp->cgn_warn_freq = cpu_to_le16(sig_freq); - } - crc = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ, LPFC_CGN_CRC32_SEED); - cp->cgn_info_crc = cpu_to_le32(crc); + /* We are NOT recording signal frequency in congestion info buffer */ return;

out_no_support: @@ -9584,11 +9563,14 @@ lpfc_els_rcv_fpin_cgn(struct lpfc_hba *phba, struct fc_tlv_desc *tlv) /* Take action here for an Alarm event */ if (phba->cmf_active_mode != LPFC_CFG_OFF) { if (phba->cgn_reg_fpin & LPFC_CGN_FPIN_ALARM) { - /* Track of alarm cnt for cgn_info */ - atomic_inc(&phba->cgn_fabric_alarm_cnt); /* Track of alarm cnt for SYNC_WQE */ atomic_inc(&phba->cgn_sync_alarm_cnt); } + /* Track alarm cnt for cgn_info regardless + * of whether CMF is configured for Signals + * or FPINs. + */ + atomic_inc(&phba->cgn_fabric_alarm_cnt); goto cleanup; } break; @@ -9596,11 +9578,14 @@ lpfc_els_rcv_fpin_cgn(struct lpfc_hba *phba, struct fc_tlv_desc *tlv) /* Take action here for a Warning event */ if (phba->cmf_active_mode != LPFC_CFG_OFF) { if (phba->cgn_reg_fpin & LPFC_CGN_FPIN_WARN) { - /* Track of warning cnt for cgn_info */ - atomic_inc(&phba->cgn_fabric_warn_cnt); /* Track of warning cnt for SYNC_WQE */ atomic_inc(&phba->cgn_sync_warn_cnt); } + /* Track warning cnt and freq for cgn_info + * regardless of whether CMF is configured for + * Signals or FPINs. + */ + atomic_inc(&phba->cgn_fabric_warn_cnt); cleanup: /* Save frequency in ms */ phba->cgn_fpin_frequency = @@ -9609,14 +9594,10 @@ lpfc_els_rcv_fpin_cgn(struct lpfc_hba *phba, struct fc_tlv_desc *tlv) if (phba->cgn_i) { cp = (struct lpfc_cgn_info *) phba->cgn_i->virt; - if (phba->cgn_reg_fpin & - LPFC_CGN_FPIN_ALARM) - cp->cgn_alarm_freq = - cpu_to_le16(value); - if (phba->cgn_reg_fpin & - LPFC_CGN_FPIN_WARN) - cp->cgn_warn_freq = - cpu_to_le16(value); + cp->cgn_alarm_freq = + cpu_to_le16(value); + cp->cgn_warn_freq = + cpu_to_le16(value); crc = lpfc_cgn_calc_crc32 (cp, LPFC_CGN_INFO_SZ, diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index ce103c1f8062..a2694fb32b5d 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -5795,21 +5795,8 @@ lpfc_cgn_save_evt_cnt(struct lpfc_hba *phba)

/* Use the frequency found in the last rcv'ed FPIN */ value = phba->cgn_fpin_frequency; - if (phba->cgn_reg_fpin & LPFC_CGN_FPIN_WARN) - cp->cgn_warn_freq = cpu_to_le16(value); - if (phba->cgn_reg_fpin & LPFC_CGN_FPIN_ALARM) - cp->cgn_alarm_freq = cpu_to_le16(value); - - /* Frequency (in ms) Signal Warning/Signal Congestion Notifications - * are received by the HBA - */ - value = phba->cgn_sig_freq; - - if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY || - phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) - cp->cgn_warn_freq = cpu_to_le16(value); - if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) - cp->cgn_alarm_freq = cpu_to_le16(value); + cp->cgn_warn_freq = cpu_to_le16(value); + cp->cgn_alarm_freq = cpu_to_le16(value);

lvalue = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ, LPFC_CGN_CRC32_SEED); @@ -6493,9 +6480,6 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli) /* Alarm overrides warning, so check that first */ if (cgn_signal->alarm_cnt) { if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) { - /* Keep track of alarm cnt for cgn_info */ - atomic_add(cgn_signal->alarm_cnt, - &phba->cgn_fabric_alarm_cnt); /* Keep track of alarm cnt for CMF_SYNC_WQE */ atomic_add(cgn_signal->alarm_cnt, &phba->cgn_sync_alarm_cnt); @@ -6504,8 +6488,6 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli) /* signal action needs to be taken */ if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY || phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) { - /* Keep track of warning cnt for cgn_info */ - atomic_add(cnt, &phba->cgn_fabric_warn_cnt); /* Keep track of warning cnt for CMF_SYNC_WQE */ atomic_add(cnt, &phba->cgn_sync_warn_cnt); }

From: Heiko Carstens hca@linux.ibm.com

[ Upstream commit 63678eecec57fc51b778be3da35a397931287170 ]

gcc 12 does not (always) optimize away code that should only be generated if parameters are constant and within in a certain range. This depends on various obscure kernel config options, however in particular PROFILE_ALL_BRANCHES can trigger this compile error:

In function ‘__atomic_add_const’, inlined from ‘__preempt_count_add.part.0’ at ./arch/s390/include/asm/preempt.h:50:3: ./arch/s390/include/asm/atomic_ops.h:80:9: error: impossible constraint in ‘asm’ 80 | asm volatile( \ | ^~~

Workaround this by simply disabling the optimization for PROFILE_ALL_BRANCHES, since the kernel will be so slow, that this optimization won't matter at all.

Reported-by: Thomas Richter tmricht@linux.ibm.com Reviewed-by: Sven Schnelle svens@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/include/asm/preempt.h | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/arch/s390/include/asm/preempt.h b/arch/s390/include/asm/preempt.h index d9d5350cc3ec..bf15da0fedbc 100644 --- a/arch/s390/include/asm/preempt.h +++ b/arch/s390/include/asm/preempt.h @@ -46,10 +46,17 @@ static inline bool test_preempt_need_resched(void)

static inline void __preempt_count_add(int val) { - if (__builtin_constant_p(val) && (val >= -128) && (val <= 127)) - __atomic_add_const(val, &S390_lowcore.preempt_count); - else - __atomic_add(val, &S390_lowcore.preempt_count); + /* + * With some obscure config options and CONFIG_PROFILE_ALL_BRANCHES + * enabled, gcc 12 fails to handle __builtin_constant_p(). + */ + if (!IS_ENABLED(CONFIG_PROFILE_ALL_BRANCHES)) { + if (__builtin_constant_p(val) && (val >= -128) && (val <= 127)) { + __atomic_add_const(val, &S390_lowcore.preempt_count); + return; + } + } + __atomic_add(val, &S390_lowcore.preempt_count); }

static inline void __preempt_count_sub(int val)

From: Hao Jia jiahao.os@bytedance.com

[ Upstream commit 2679a83731d51a744657f718fc02c3b077e47562 ]

When we use raw_spin_rq_lock() to acquire the rq lock and have to update the rq clock while holding the lock, the kernel may issue a WARN_DOUBLE_CLOCK warning.

Since we directly use raw_spin_rq_lock() to acquire rq lock instead of rq_lock(), there is no corresponding change to rq->clock_update_flags. In particular, we have obtained the rq lock of other CPUs, the rq->clock_update_flags of this CPU may be RQCF_UPDATED at this time, and then calling update_rq_clock() will trigger the WARN_DOUBLE_CLOCK warning.

So we need to clear RQCF_UPDATED of rq->clock_update_flags to avoid the WARN_DOUBLE_CLOCK warning.

For the sched_rt_period_timer() and migrate_task_rq_dl() cases we simply replace raw_spin_rq_lock()/raw_spin_rq_unlock() with rq_lock()/rq_unlock().

For the {pull,push}_{rt,dl}_task() cases, we add the double_rq_clock_clear_update() function to clear RQCF_UPDATED of rq->clock_update_flags, and call double_rq_clock_clear_update() before double_lock_balance()/double_rq_lock() returns to avoid the WARN_DOUBLE_CLOCK warning.

Some call trace reports: Call Trace 1: <IRQ> sched_rt_period_timer+0x10f/0x3a0 ? enqueue_top_rt_rq+0x110/0x110 __hrtimer_run_queues+0x1a9/0x490 hrtimer_interrupt+0x10b/0x240 __sysvec_apic_timer_interrupt+0x8a/0x250 sysvec_apic_timer_interrupt+0x9a/0xd0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20

Call Trace 2: <TASK> activate_task+0x8b/0x110 push_rt_task.part.108+0x241/0x2c0 push_rt_tasks+0x15/0x30 finish_task_switch+0xaa/0x2e0 ? __switch_to+0x134/0x420 __schedule+0x343/0x8e0 ? hrtimer_start_range_ns+0x101/0x340 schedule+0x4e/0xb0 do_nanosleep+0x8e/0x160 hrtimer_nanosleep+0x89/0x120 ? hrtimer_init_sleeper+0x90/0x90 __x64_sys_nanosleep+0x96/0xd0 do_syscall_64+0x34/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae

Call Trace 3: <TASK> deactivate_task+0x93/0xe0 pull_rt_task+0x33e/0x400 balance_rt+0x7e/0x90 __schedule+0x62f/0x8e0 do_task_dead+0x3f/0x50 do_exit+0x7b8/0xbb0 do_group_exit+0x2d/0x90 get_signal+0x9df/0x9e0 ? preempt_count_add+0x56/0xa0 ? __remove_hrtimer+0x35/0x70 arch_do_signal_or_restart+0x36/0x720 ? nanosleep_copyout+0x39/0x50 ? do_nanosleep+0x131/0x160 ? audit_filter_inodes+0xf5/0x120 exit_to_user_mode_prepare+0x10f/0x1e0 syscall_exit_to_user_mode+0x17/0x30 do_syscall_64+0x40/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae

Call Trace 4: update_rq_clock+0x128/0x1a0 migrate_task_rq_dl+0xec/0x310 set_task_cpu+0x84/0x1e4 try_to_wake_up+0x1d8/0x5c0 wake_up_process+0x1c/0x30 hrtimer_wakeup+0x24/0x3c __hrtimer_run_queues+0x114/0x270 hrtimer_interrupt+0xe8/0x244 arch_timer_handler_phys+0x30/0x50 handle_percpu_devid_irq+0x88/0x140 generic_handle_domain_irq+0x40/0x60 gic_handle_irq+0x48/0xe0 call_on_irq_stack+0x2c/0x60 do_interrupt_handler+0x80/0x84

Steps to reproduce: 1. Enable CONFIG_SCHED_DEBUG when compiling the kernel 2. echo 1 > /sys/kernel/debug/clear_warn_once echo "WARN_DOUBLE_CLOCK" > /sys/kernel/debug/sched/features echo "NO_RT_PUSH_IPI" > /sys/kernel/debug/sched/features 3. Run some rt/dl tasks that periodically work and sleep, e.g. Create 2*n rt or dl (90% running) tasks via rt-app (on a system with n CPUs), and Dietmar Eggemann reports Call Trace 4 when running on PREEMPT_RT kernel.

Signed-off-by: Hao Jia jiahao.os@bytedance.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Dietmar Eggemann dietmar.eggemann@arm.com Link: https://lore.kernel.org/r/20220430085843.62939-2-jiahao.os@bytedance.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/sched/core.c | 6 +++--- kernel/sched/deadline.c | 5 +++-- kernel/sched/rt.c | 5 +++-- kernel/sched/sched.h | 28 ++++++++++++++++++++++++---- 4 files changed, 33 insertions(+), 11 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 779f3198b17d..838623b68031 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -531,10 +531,10 @@ void double_rq_lock(struct rq *rq1, struct rq *rq2) swap(rq1, rq2);

raw_spin_rq_lock(rq1); - if (__rq_lockp(rq1) == __rq_lockp(rq2)) - return; + if (__rq_lockp(rq1) != __rq_lockp(rq2)) + raw_spin_rq_lock_nested(rq2, SINGLE_DEPTH_NESTING);

- raw_spin_rq_lock_nested(rq2, SINGLE_DEPTH_NESTING); + double_rq_clock_clear_update(rq1, rq2); } #endif

diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c index 1f811b375bf0..fffcb1aa77b7 100644 --- a/kernel/sched/deadline.c +++ b/kernel/sched/deadline.c @@ -1720,6 +1720,7 @@ select_task_rq_dl(struct task_struct *p, int cpu, int flags)

static void migrate_task_rq_dl(struct task_struct *p, int new_cpu __maybe_unused) { + struct rq_flags rf; struct rq *rq;

if (READ_ONCE(p->__state) != TASK_WAKING) @@ -1731,7 +1732,7 @@ static void migrate_task_rq_dl(struct task_struct *p, int new_cpu __maybe_unused * from try_to_wake_up(). Hence, p->pi_lock is locked, but * rq->lock is not... So, lock it */ - raw_spin_rq_lock(rq); + rq_lock(rq, &rf); if (p->dl.dl_non_contending) { update_rq_clock(rq); sub_running_bw(&p->dl, &rq->dl); @@ -1747,7 +1748,7 @@ static void migrate_task_rq_dl(struct task_struct *p, int new_cpu __maybe_unused put_task_struct(p); } sub_rq_bw(&p->dl, &rq->dl); - raw_spin_rq_unlock(rq); + rq_unlock(rq, &rf); }

static void check_preempt_equal_dl(struct rq *rq, struct task_struct *p) diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c index 2758cf5f7987..8007d087a57f 100644 --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -885,6 +885,7 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun) int enqueue = 0; struct rt_rq *rt_rq = sched_rt_period_rt_rq(rt_b, i); struct rq *rq = rq_of_rt_rq(rt_rq); + struct rq_flags rf; int skip;

/* @@ -899,7 +900,7 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun) if (skip) continue;

- raw_spin_rq_lock(rq); + rq_lock(rq, &rf); update_rq_clock(rq);

if (rt_rq->rt_time) { @@ -937,7 +938,7 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun)

if (enqueue) sched_rt_rq_enqueue(rt_rq); - raw_spin_rq_unlock(rq); + rq_unlock(rq, &rf); }

if (!throttled && (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)) diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index 4f432826933d..d30dc55e6cee 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -2489,6 +2489,24 @@ unsigned long arch_scale_freq_capacity(int cpu) } #endif

+#ifdef CONFIG_SCHED_DEBUG +/* + * In double_lock_balance()/double_rq_lock(), we use raw_spin_rq_lock() to + * acquire rq lock instead of rq_lock(). So at the end of these two functions + * we need to call double_rq_clock_clear_update() to clear RQCF_UPDATED of + * rq->clock_update_flags to avoid the WARN_DOUBLE_CLOCK warning. + */ +static inline void double_rq_clock_clear_update(struct rq *rq1, struct rq *rq2) +{ + rq1->clock_update_flags &= (RQCF_REQ_SKIP|RQCF_ACT_SKIP); + /* rq1 == rq2 for !CONFIG_SMP, so just clear RQCF_UPDATED once. */ +#ifdef CONFIG_SMP + rq2->clock_update_flags &= (RQCF_REQ_SKIP|RQCF_ACT_SKIP); +#endif +} +#else +static inline void double_rq_clock_clear_update(struct rq *rq1, struct rq *rq2) {} +#endif

#ifdef CONFIG_SMP

@@ -2554,14 +2572,15 @@ static inline int _double_lock_balance(struct rq *this_rq, struct rq *busiest) __acquires(busiest->lock) __acquires(this_rq->lock) { - if (__rq_lockp(this_rq) == __rq_lockp(busiest)) - return 0; - - if (likely(raw_spin_rq_trylock(busiest))) + if (__rq_lockp(this_rq) == __rq_lockp(busiest) || + likely(raw_spin_rq_trylock(busiest))) { + double_rq_clock_clear_update(this_rq, busiest); return 0; + }

if (rq_order_less(this_rq, busiest)) { raw_spin_rq_lock_nested(busiest, SINGLE_DEPTH_NESTING); + double_rq_clock_clear_update(this_rq, busiest); return 0; }

@@ -2655,6 +2674,7 @@ static inline void double_rq_lock(struct rq *rq1, struct rq *rq2) BUG_ON(rq1 != rq2); raw_spin_rq_lock(rq1); __acquire(rq2->lock); /* Fake it out ;) */ + double_rq_clock_clear_update(rq1, rq2); }

/*

From: Mikulas Patocka mpatocka@redhat.com

[ Upstream commit 84bc4f1dbbbb5f8aa68706a96711dccb28b518e5 ]

We observed the error "cacheline tracking ENOMEM, dma-debug disabled" during a light system load (copying some files). The reason for this error is that the dma_active_cacheline radix tree uses GFP_NOWAIT allocation - so it can't access the emergency memory reserves and it fails as soon as anybody reaches the watermark.

This patch changes GFP_NOWAIT to GFP_ATOMIC, so that it can access the emergency memory reserves.

Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/dma/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c index f8ff598596b8..ac740630c79c 100644 --- a/kernel/dma/debug.c +++ b/kernel/dma/debug.c @@ -448,7 +448,7 @@ void debug_dma_dump_mappings(struct device *dev) * other hand, consumes a single dma_debug_entry, but inserts 'nents' * entries into the tree. */ -static RADIX_TREE(dma_active_cacheline, GFP_NOWAIT); +static RADIX_TREE(dma_active_cacheline, GFP_ATOMIC); static DEFINE_SPINLOCK(radix_lock); #define ACTIVE_CACHELINE_MAX_OVERLAP ((1 << RADIX_TREE_MAX_TAGS) - 1) #define CACHELINE_PER_PAGE_SHIFT (PAGE_SHIFT - L1_CACHE_SHIFT)

From: Corey Minyard cminyard@mvista.com

[ Upstream commit 7602b957e2404e5f98d9a40b68f1fd27f0028712 ]

Even though it's not possible to get into the SSIF_GETTING_MESSAGES and SSIF_GETTING_EVENTS states without a valid message in the msg field, it's probably best to be defensive here and check and print a log, since that means something else went wrong.

Also add a default clause to that switch statement to release the lock and print a log, in case the state variable gets messed up somehow.

Reported-by: Haowen Bai baihaowen@meizu.com Signed-off-by: Corey Minyard cminyard@mvista.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/ipmi/ipmi_ssif.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)

diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index 8d7a8898e80b..f366e8e3eee3 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -814,6 +814,14 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, break;

case SSIF_GETTING_EVENTS: + if (!msg) { + /* Should never happen, but just in case. */ + dev_warn(&ssif_info->client->dev, + "No message set while getting events\n"); + ipmi_ssif_unlock_cond(ssif_info, flags); + break; + } + if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { /* Error getting event, probably done. */ msg->done(msg); @@ -838,6 +846,14 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, break;

case SSIF_GETTING_MESSAGES: + if (!msg) { + /* Should never happen, but just in case. */ + dev_warn(&ssif_info->client->dev, + "No message set while getting messages\n"); + ipmi_ssif_unlock_cond(ssif_info, flags); + break; + } + if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { /* Error getting event, probably done. */ msg->done(msg); @@ -861,6 +877,13 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, deliver_recv_msg(ssif_info, msg); } break; + + default: + /* Should never happen, but just in case. */ + dev_warn(&ssif_info->client->dev, + "Invalid state in message done handling: %d\n", + ssif_info->ssif_state); + ipmi_ssif_unlock_cond(ssif_info, flags); }

flags = ipmi_ssif_lock_cond(ssif_info, &oflags);

From: Dongliang Mu mudongliangabcd@gmail.com

[ Upstream commit ad732da434a2936128769216eddaece3b1af4588 ]

This memory allocation failure can be triggered by fault injection or high pressure testing, resulting a WARN.

Fix this by replacing WARN with pr_warn.

Reported-by: syzkaller syzkaller@googlegroups.com Signed-off-by: Dongliang Mu mudongliangabcd@gmail.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20220511014453.1621366-1-dzm91@hust.edu.cn Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtlwifi/usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c index 86a236873254..a8eebafb9a7e 100644 --- a/drivers/net/wireless/realtek/rtlwifi/usb.c +++ b/drivers/net/wireless/realtek/rtlwifi/usb.c @@ -1014,7 +1014,7 @@ int rtl_usb_probe(struct usb_interface *intf, hw = ieee80211_alloc_hw(sizeof(struct rtl_priv) + sizeof(struct rtl_usb_priv), &rtl_ops); if (!hw) { - WARN_ONCE(true, "rtl_usb: ieee80211 alloc failed\n"); + pr_warn("rtl_usb: ieee80211 alloc failed\n"); return -ENOMEM; } rtlpriv = hw->priv;

From: Felix Fietkau nbd@nbd.name

[ Upstream commit bc98e7fdd80d215b4b55eea001023231eb8ce12e ]

The driver needs to check if the format is 802.2 vs 802.3 in order to set a tx descriptor flag. skb->protocol can't be used, since it may not be properly initialized for packets coming in from a packet socket. Fix misdetection by checking the ethertype from the skb data instead

Reported-by: Thibaut VARÈNE hacks+kernel@slashdirt.org Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 4 +++- drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c index 7691292526e0..a8a0e6af51f8 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c @@ -799,6 +799,7 @@ mt7915_mac_write_txwi_8023(struct mt7915_dev *dev, __le32 *txwi,

u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK; u8 fc_type, fc_stype; + u16 ethertype; bool wmm = false; u32 val;

@@ -812,7 +813,8 @@ mt7915_mac_write_txwi_8023(struct mt7915_dev *dev, __le32 *txwi, val = FIELD_PREP(MT_TXD1_HDR_FORMAT, MT_HDR_FORMAT_802_3) | FIELD_PREP(MT_TXD1_TID, tid);

- if (be16_to_cpu(skb->protocol) >= ETH_P_802_3_MIN) + ethertype = get_unaligned_be16(&skb->data[12]); + if (ethertype >= ETH_P_802_3_MIN) val |= MT_TXD1_ETH_802_3;

txwi[1] |= cpu_to_le32(val); diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c index 5024ddf07cbc..bef8d4a76ed9 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c @@ -681,6 +681,7 @@ mt7921_mac_write_txwi_8023(struct mt7921_dev *dev, __le32 *txwi, { u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK; u8 fc_type, fc_stype; + u16 ethertype; bool wmm = false; u32 val;

@@ -694,7 +695,8 @@ mt7921_mac_write_txwi_8023(struct mt7921_dev *dev, __le32 *txwi, val = FIELD_PREP(MT_TXD1_HDR_FORMAT, MT_HDR_FORMAT_802_3) | FIELD_PREP(MT_TXD1_TID, tid);

- if (be16_to_cpu(skb->protocol) >= ETH_P_802_3_MIN) + ethertype = get_unaligned_be16(&skb->data[12]); + if (ethertype >= ETH_P_802_3_MIN) val |= MT_TXD1_ETH_802_3;

txwi[1] |= cpu_to_le32(val);

From: Philipp Zabel p.zabel@pengutronix.de

[ Upstream commit 67e33dd957880879e785cfea83a3aa24bd5c5577 ]

Let VIDIOC_ENUM_FRAMEINTERVALS return -EINVAL if userspace queries frame intervals for frame sizes unsupported by the encoder. Fixes the following v4l2-compliance failure:

fail: v4l2-test-formats.cpp(123): found frame intervals for invalid size 47x16 fail: v4l2-test-formats.cpp(282): node->codec_mask & STATEFUL_ENCODER test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL

[hverkuil: drop incorrect 'For decoder devices, return -ENOTTY.' in the commit log]

Signed-off-by: Philipp Zabel p.zabel@pengutronix.de Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/coda/coda-common.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c index 4a553f42ff0a..befc9db16c86 100644 --- a/drivers/media/platform/coda/coda-common.c +++ b/drivers/media/platform/coda/coda-common.c @@ -1318,7 +1318,8 @@ static int coda_enum_frameintervals(struct file *file, void *fh, struct v4l2_frmivalenum *f) { struct coda_ctx *ctx = fh_to_ctx(fh); - int i; + struct coda_q_data *q_data; + const struct coda_codec *codec;

if (f->index) return -EINVAL; @@ -1327,12 +1328,19 @@ static int coda_enum_frameintervals(struct file *file, void *fh, if (!ctx->vdoa && f->pixel_format == V4L2_PIX_FMT_YUYV) return -EINVAL;

- for (i = 0; i < CODA_MAX_FORMATS; i++) { - if (f->pixel_format == ctx->cvd->src_formats[i] || - f->pixel_format == ctx->cvd->dst_formats[i]) - break; + if (coda_format_normalize_yuv(f->pixel_format) == V4L2_PIX_FMT_YUV420) { + q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + codec = coda_find_codec(ctx->dev, f->pixel_format, + q_data->fourcc); + } else { + codec = coda_find_codec(ctx->dev, V4L2_PIX_FMT_YUV420, + f->pixel_format); } - if (i == CODA_MAX_FORMATS) + if (!codec) + return -EINVAL; + + if (f->width < MIN_W || f->width > codec->max_w || + f->height < MIN_H || f->height > codec->max_h) return -EINVAL;

f->type = V4L2_FRMIVAL_TYPE_CONTINUOUS;

From: Hans Verkuil hverkuil-cisco@xs4all.nl

[ Upstream commit eca89cf60b040ee2cae693ea72a0364284f3084c ]

Fixes smatch warning:

drivers/media/i2c/ccs/ccs-core.c:1676 ccs_power_on() warn: 'sensor->ext_clk' from clk_prepare_enable() not released on lines: 1606.

Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/i2c/ccs/ccs-core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c index 5363f3bcafe3..67bb770ed63f 100644 --- a/drivers/media/i2c/ccs/ccs-core.c +++ b/drivers/media/i2c/ccs/ccs-core.c @@ -1603,8 +1603,11 @@ static int ccs_power_on(struct device *dev) usleep_range(1000, 2000); } while (--retry);

- if (!reset) - return -EIO; + if (!reset) { + dev_err(dev, "software reset failed\n"); + rval = -EIO; + goto out_cci_addr_fail; + } }

if (sensor->hwcfg.i2c_addr_alt) {

From: Hans Verkuil hverkuil-cisco@xs4all.nl

[ Upstream commit 59267fc34f4900dcd2ec3295f6be04b79aee2186 ]

If an adapter is trying to claim a free logical address then it is in the 'is_configuring' state. If during that process the cable is disconnected (HPD goes low, which in turn invalidates the physical address), then cec_adap_unconfigure() is called, and that set the is_configuring boolean to false, even though the thread that's trying to claim an LA is still running.

Don't touch the is_configuring bool in cec_adap_unconfigure(), it will eventually be cleared by the thread. By making that change the cec_config_log_addr() function also had to change: it was aborting if is_configuring became false (since that is what cec_adap_unconfigure() did), but that no longer works. Instead check if the physical address is invalid. That is a much more appropriate check anyway.

This fixes a bug where the the adapter could be disabled even though the device was still configuring. This could cause POLL transmits to time out.

Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/cec/core/cec-adap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/cec/core/cec-adap.c b/drivers/media/cec/core/cec-adap.c index 1f599e300e42..67776a0d31e8 100644 --- a/drivers/media/cec/core/cec-adap.c +++ b/drivers/media/cec/core/cec-adap.c @@ -1272,7 +1272,7 @@ static int cec_config_log_addr(struct cec_adapter *adap, * While trying to poll the physical address was reset * and the adapter was unconfigured, so bail out. */ - if (!adap->is_configuring) + if (adap->phys_addr == CEC_PHYS_ADDR_INVALID) return -EINTR;

if (err) @@ -1329,7 +1329,6 @@ static void cec_adap_unconfigure(struct cec_adapter *adap) adap->phys_addr != CEC_PHYS_ADDR_INVALID) WARN_ON(adap->ops->adap_log_addr(adap, CEC_LOG_ADDR_INVALID)); adap->log_addrs.log_addr_mask = 0; - adap->is_configuring = false; adap->is_configured = false; cec_flush(adap); wake_up_interruptible(&adap->kthread_waitq); @@ -1521,9 +1520,10 @@ static int cec_config_thread_func(void *arg) for (i = 0; i < las->num_log_addrs; i++) las->log_addr[i] = CEC_LOG_ADDR_INVALID; cec_adap_unconfigure(adap); + adap->is_configuring = false; adap->kthread_config = NULL; - mutex_unlock(&adap->lock); complete(&adap->config_completion); + mutex_unlock(&adap->lock); return 0; }

From: "Jason A. Donenfeld" Jason@zx2c4.com

[ Upstream commit fe222a6ca2d53c38433cba5d3be62a39099e708e ]

Currently time_init() is called after rand_initialize(), but rand_initialize() makes use of the timer on various platforms, and sometimes this timer needs to be initialized by time_init() first. In order for random_get_entropy() to not return zero during early boot when it's potentially used as an entropy source, reverse the order of these two calls. The block doing random initialization was right before time_init() before, so changing the order shouldn't have any complicated effects.

Cc: Andrew Morton akpm@linux-foundation.org Reviewed-by: Stafford Horne shorne@gmail.com Signed-off-by: Jason A. Donenfeld Jason@zx2c4.com Signed-off-by: Sasha Levin sashal@kernel.org --- init/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/init/main.c b/init/main.c index 06b98350ebd2..2b9ba7ea42ec 100644 --- a/init/main.c +++ b/init/main.c @@ -1041,11 +1041,13 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void) softirq_init(); timekeeping_init(); kfence_init(); + time_init();

/* * For best initial stack canary entropy, prepare it after: * - setup_arch() for any UEFI RNG entropy and boot cmdline access * - timekeeping_init() for ktime entropy used in rand_initialize() + * - time_init() for making random_get_entropy() work on some platforms * - rand_initialize() to get any arch-specific entropy like RDRAND * - add_latent_entropy() to get any latent entropy * - adding command line entropy @@ -1055,7 +1057,6 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void) add_device_randomness(command_line, strlen(command_line)); boot_init_stack_canary();

- time_init(); perf_event_init(); profile_init(); call_function_init();

From: "Smith, Kyle Miller (Nimble Kernel)" kyles@hpe.com

[ Upstream commit da42761181627e9bdc37d18368b827948a583929 ]

In nvme_alloc_admin_tags, the admin_q can be set to an error (typically -ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which is checked immediately after the call. However, when we return the error message up the stack, to nvme_reset_work the error takes us to nvme_remove_dead_ctrl() nvme_dev_disable() nvme_suspend_queue(&dev->queues[0]).

Here, we only check that the admin_q is non-NULL, rather than not an error or NULL, and begin quiescing a queue that never existed, leading to bad / NULL pointer dereference.

Signed-off-by: Kyle Smith kyles@hpe.com Reviewed-by: Chaitanya Kulkarni kch@nvidia.com Reviewed-by: Hannes Reinecke hare@suse.de Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index e6f55cf6e494..3ddd24a42043 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1680,6 +1680,7 @@ static int nvme_alloc_admin_tags(struct nvme_dev *dev) dev->ctrl.admin_q = blk_mq_init_queue(&dev->admin_tagset); if (IS_ERR(dev->ctrl.admin_q)) { blk_mq_free_tag_set(&dev->admin_tagset); + dev->ctrl.admin_q = NULL; return -ENOMEM; } if (!blk_get_queue(dev->ctrl.admin_q)) {

From: Xie Yongji xieyongji@bytedance.com

[ Upstream commit 491bf8f236fdeec698fa6744993f1ecf3fafd1a5 ]

When userspace closes the socket before sending a disconnect request, the following I/O requests will be blocked in wait_for_reconnect() until dead timeout. This will cause the following disconnect request also hung on blk_mq_quiesce_queue(). That means we have no way to disconnect a nbd device if there are some I/O requests waiting for reconnecting until dead timeout. It's not expected. So let's wake up the thread waiting for reconnecting directly when a disconnect request is sent.

Reported-by: Xu Jianhai zero.xu@bytedance.com Signed-off-by: Xie Yongji xieyongji@bytedance.com Reviewed-by: Josef Bacik josef@toxicpanda.com Link: https://lore.kernel.org/r/20220322080639.142-1-xieyongji@bytedance.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/nbd.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 582b23befb5c..8704212482e5 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -896,11 +896,15 @@ static int wait_for_reconnect(struct nbd_device *nbd) struct nbd_config *config = nbd->config; if (!config->dead_conn_timeout) return 0; - if (test_bit(NBD_RT_DISCONNECTED, &config->runtime_flags)) + + if (!wait_event_timeout(config->conn_wait, + test_bit(NBD_RT_DISCONNECTED, + &config->runtime_flags) || + atomic_read(&config->live_connections) > 0, + config->dead_conn_timeout)) return 0; - return wait_event_timeout(config->conn_wait, - atomic_read(&config->live_connections) > 0, - config->dead_conn_timeout) > 0; + + return !test_bit(NBD_RT_DISCONNECTED, &config->runtime_flags); }

static int nbd_handle_cmd(struct nbd_cmd *cmd, int index) @@ -2026,6 +2030,7 @@ static void nbd_disconnect_and_put(struct nbd_device *nbd) mutex_lock(&nbd->config_lock); nbd_disconnect(nbd); sock_shutdown(nbd); + wake_up(&nbd->config->conn_wait); /* * Make sure recv thread has finished, we can safely call nbd_clear_que() * to cancel the inflight I/Os.

From: Sathishkumar S sathishkumar.sundararaju@amd.com

[ Upstream commit cdf4c8ec39872a61a58d62f19b4db80f0f7bc586 ]

smartshift apu and dgpu power boost are reported as percentage with respect to their power limits. adjust the units of power before calculating the percentage of boost.

Signed-off-by: Sathishkumar S sathishkumar.sundararaju@amd.com Reviewed-by: Lijo Lazar lijo.lazar@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c | 62 ++++++++++++++----- 1 file changed, 46 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c index 0e1a843608e4..33bd5430c6de 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c @@ -305,6 +305,42 @@ static int yellow_carp_mode2_reset(struct smu_context *smu) return yellow_carp_mode_reset(smu, SMU_RESET_MODE_2); }

+ +static void yellow_carp_get_ss_power_percent(SmuMetrics_t *metrics, + uint32_t *apu_percent, uint32_t *dgpu_percent) +{ + uint32_t apu_boost = 0; + uint32_t dgpu_boost = 0; + uint16_t apu_limit = 0; + uint16_t dgpu_limit = 0; + uint16_t apu_power = 0; + uint16_t dgpu_power = 0; + + /* APU and dGPU power values are reported in milli Watts + * and STAPM power limits are in Watts */ + apu_power = metrics->ApuPower/1000; + apu_limit = metrics->StapmOpnLimit; + if (apu_power > apu_limit && apu_limit != 0) + apu_boost = ((apu_power - apu_limit) * 100) / apu_limit; + apu_boost = (apu_boost > 100) ? 100 : apu_boost; + + dgpu_power = metrics->dGpuPower/1000; + if (metrics->StapmCurrentLimit > metrics->StapmOpnLimit) + dgpu_limit = metrics->StapmCurrentLimit - metrics->StapmOpnLimit; + if (dgpu_power > dgpu_limit && dgpu_limit != 0) + dgpu_boost = ((dgpu_power - dgpu_limit) * 100) / dgpu_limit; + dgpu_boost = (dgpu_boost > 100) ? 100 : dgpu_boost; + + if (dgpu_boost >= apu_boost) + apu_boost = 0; + else + dgpu_boost = 0; + + *apu_percent = apu_boost; + *dgpu_percent = dgpu_boost; + +} + static int yellow_carp_get_smu_metrics_data(struct smu_context *smu, MetricsMember_t member, uint32_t *value) @@ -313,6 +349,8 @@ static int yellow_carp_get_smu_metrics_data(struct smu_context *smu,

SmuMetrics_t *metrics = (SmuMetrics_t *)smu_table->metrics_table; int ret = 0; + uint32_t apu_percent = 0; + uint32_t dgpu_percent = 0;

mutex_lock(&smu->metrics_lock);

@@ -365,26 +403,18 @@ static int yellow_carp_get_smu_metrics_data(struct smu_context *smu, *value = metrics->Voltage[1]; break; case METRICS_SS_APU_SHARE: - /* return the percentage of APU power with respect to APU's power limit. - * percentage is reported, this isn't boost value. Smartshift power - * boost/shift is only when the percentage is more than 100. + /* return the percentage of APU power boost + * with respect to APU's power limit. */ - if (metrics->StapmOpnLimit > 0) - *value = (metrics->ApuPower * 100) / metrics->StapmOpnLimit; - else - *value = 0; + yellow_carp_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent); + *value = apu_percent; break; case METRICS_SS_DGPU_SHARE: - /* return the percentage of dGPU power with respect to dGPU's power limit. - * percentage is reported, this isn't boost value. Smartshift power - * boost/shift is only when the percentage is more than 100. + /* return the percentage of dGPU power boost + * with respect to dGPU's power limit. */ - if ((metrics->dGpuPower > 0) && - (metrics->StapmCurrentLimit > metrics->StapmOpnLimit)) - *value = (metrics->dGpuPower * 100) / - (metrics->StapmCurrentLimit - metrics->StapmOpnLimit); - else - *value = 0; + yellow_carp_get_ss_power_percent(metrics, &apu_percent, &dgpu_percent); + *value = dgpu_percent; break; default: *value = UINT_MAX;

From: Kwanghoon Son k.son@samsung.com

[ Upstream commit e080f5c1f2b6d02c02ee5d674e0e392ccf63bbaf ]

Declare static on function 'fimc_isp_video_device_unregister'.

When VIDEO_EXYNOS4_ISP_DMA_CAPTURE=n, compiler warns about warning: no previous prototype for function [-Wmissing-prototypes]

Reported-by: kernel test robot lkp@intel.com Signed-off-by: Kwanghoon Son k.son@samsung.com Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/exynos4-is/fimc-isp-video.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.h b/drivers/media/platform/exynos4-is/fimc-isp-video.h index edcb3a5e3cb9..2dd4ddbc748a 100644 --- a/drivers/media/platform/exynos4-is/fimc-isp-video.h +++ b/drivers/media/platform/exynos4-is/fimc-isp-video.h @@ -32,7 +32,7 @@ static inline int fimc_isp_video_device_register(struct fimc_isp *isp, return 0; }

-void fimc_isp_video_device_unregister(struct fimc_isp *isp, +static inline void fimc_isp_video_device_unregister(struct fimc_isp *isp, enum v4l2_buf_type type) { }

From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com

[ Upstream commit 21ca3274333f5c1cbbf9d91e5b33f4f2463859b2 ]

commit dcc2c012c7691 ("ASoC: Fix gpiolib dependencies") removed a series of unnecessary dependencies on GPIOLIB when the gpio was optional.

A similar simplification seems valid for max98357a, so remove the dependency as well. This will avoid the following warning

WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_INTEL_SOF_CS42L42_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] && (SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C [=y] && ACPI [=y] && SND_HDA_CODEC_HDMI [=y] && SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] || COMPILE_TEST [=n])

Reported-by: kernel test robot yujie.liu@intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Péter Ujfalusi peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20220517172647.468244-2-pierre-louis.bossart@linux... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/Kconfig | 1 - 1 file changed, 1 deletion(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 47e675e8bd00..2cbf4fc0f675 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -900,7 +900,6 @@ config SND_SOC_MAX98095

config SND_SOC_MAX98357A tristate "Maxim MAX98357A CODEC" - depends on GPIOLIB

config SND_SOC_MAX98371 tristate

From: Pierre Gondois Pierre.Gondois@arm.com

[ Upstream commit 6380b7b2b29da9d9c5ab2d4a265901cd93ba3696 ]

The transition_delay_us (struct cpufreq_policy) is currently defined as: Preferred average time interval between consecutive invocations of the driver to set the frequency for this policy. To be set by the scaling driver (0, which is the default, means no preference). The transition_latency represents the amount of time necessary for a CPU to change its frequency.

A PCCT table advertises mutliple values: - pcc_nominal: Expected latency to process a command, in microseconds - pcc_mpar: The maximum number of periodic requests that the subspace channel can support, reported in commands per minute. 0 indicates no limitation. - pcc_mrtt: The minimum amount of time that OSPM must wait after the completion of a command before issuing the next command, in microseconds. cppc_get_transition_latency() allows to get the max of them.

commit d4f3388afd48 ("cpufreq / CPPC: Set platform specific transition_delay_us") allows to select transition_delay_us based on the platform, and fallbacks to cppc_get_transition_latency() otherwise.

If _CPC objects are not using PCC channels (no PPCT table), the transition_delay_us is set to CPUFREQ_ETERNAL, leading to really long periods between frequency updates (~4s).

If the desired_reg, where performance requests are written, is in SystemMemory or SystemIo ACPI address space, there is no delay in requests. So return 0 instead of CPUFREQ_ETERNAL, leading to transition_delay_us being set to LATENCY_MULTIPLIER us (1000 us).

This patch also adds two macros to check the address spaces.

Signed-off-by: Pierre Gondois pierre.gondois@arm.com Reviewed-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/cppc_acpi.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index 71b87c16f92d..ed1341030684 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -100,6 +100,16 @@ static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr); (cpc)->cpc_entry.reg.space_id == \ ACPI_ADR_SPACE_PLATFORM_COMM)

+/* Check if a CPC register is in SystemMemory */ +#define CPC_IN_SYSTEM_MEMORY(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \ + (cpc)->cpc_entry.reg.space_id == \ + ACPI_ADR_SPACE_SYSTEM_MEMORY) + +/* Check if a CPC register is in SystemIo */ +#define CPC_IN_SYSTEM_IO(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \ + (cpc)->cpc_entry.reg.space_id == \ + ACPI_ADR_SPACE_SYSTEM_IO) + /* Evaluates to True if reg is a NULL register descriptor */ #define IS_NULL_REG(reg) ((reg)->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY && \ (reg)->address == 0 && \ @@ -1378,6 +1388,9 @@ EXPORT_SYMBOL_GPL(cppc_set_perf); * transition latency for performance change requests. The closest we have * is the timing information from the PCCT tables which provides the info * on the number and frequency of PCC commands the platform can handle. + * + * If desired_reg is in the SystemMemory or SystemIo ACPI address space, + * then assume there is no latency. */ unsigned int cppc_get_transition_latency(int cpu_num) { @@ -1403,7 +1416,9 @@ unsigned int cppc_get_transition_latency(int cpu_num) return CPUFREQ_ETERNAL;

desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF]; - if (!CPC_IN_PCC(desired_reg)) + if (CPC_IN_SYSTEM_MEMORY(desired_reg) || CPC_IN_SYSTEM_IO(desired_reg)) + return 0; + else if (!CPC_IN_PCC(desired_reg)) return CPUFREQ_ETERNAL;

if (pcc_ss_id < 0)

From: Vincent Mailhol mailhol.vincent@wanadoo.fr

[ Upstream commit 1a6dd9996699889313327be03981716a8337656b ]

clang emits a -Wunaligned-access warning on union mcp251xfd_tx_ojb_load_buf.

The reason is that field hw_tx_obj (not declared as packed) is being packed right after a 16 bits field inside a packed struct:

| union mcp251xfd_tx_obj_load_buf { | struct __packed { | struct mcp251xfd_buf_cmd cmd; | /* ^ 16 bits fields */ | struct mcp251xfd_hw_tx_obj_raw hw_tx_obj; | /* ^ not declared as packed */ | } nocrc; | struct __packed { | struct mcp251xfd_buf_cmd_crc cmd; | struct mcp251xfd_hw_tx_obj_raw hw_tx_obj; | __be16 crc; | } crc; | } ____cacheline_aligned;

Starting from LLVM 14, having an unpacked struct nested in a packed struct triggers a warning. c.f. [1].

This is a false positive because the field is always being accessed with the relevant put_unaligned_*() function. Adding __packed to the structure declaration silences the warning.

[1] https://github.com/llvm/llvm-project/issues/55520

Link: https://lore.kernel.org/all/20220518114357.55452-1-mailhol.vincent@wanadoo.f... Signed-off-by: Vincent Mailhol mailhol.vincent@wanadoo.fr Reported-by: kernel test robot lkp@intel.com Tested-by: Nathan Chancellor nathan@kernel.org # build Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/spi/mcp251xfd/mcp251xfd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h index 0f322dabaf65..281856eea2ef 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h @@ -433,7 +433,7 @@ struct mcp251xfd_hw_tef_obj { /* The tx_obj_raw version is used in spi async, i.e. without * regmap. We have to take care of endianness ourselves. */ -struct mcp251xfd_hw_tx_obj_raw { +struct __packed mcp251xfd_hw_tx_obj_raw { __le32 id; __le32 flags; u8 data[sizeof_field(struct canfd_frame, data)];

From: Alex Elder elder@linaro.org

[ Upstream commit 332ef7c814bdd60f08d0d9013d0e1104798b2d23 ]

If we program an RX endpoint to have no header (header length is 0), header-related endpoint configuration values are meaningless and are ignored.

The only case we support that defines a header is QMAP endpoints. In ipa_endpoint_init_hdr_ext() we set the endianness mask value unconditionally, but it should not be done if there is no header (meaning it is not configured for QMAP).

Set the endianness conditionally, and rearrange the logic in that function slightly to avoid testing the qmap flag twice.

Delete an incorrect comment in ipa_endpoint_init_aggr().

Signed-off-by: Alex Elder elder@linaro.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ipa/ipa_endpoint.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ipa/ipa_endpoint.c b/drivers/net/ipa/ipa_endpoint.c index 87e42db1b61e..8e31c2ba5057 100644 --- a/drivers/net/ipa/ipa_endpoint.c +++ b/drivers/net/ipa/ipa_endpoint.c @@ -570,19 +570,23 @@ static void ipa_endpoint_init_hdr_ext(struct ipa_endpoint *endpoint) struct ipa *ipa = endpoint->ipa; u32 val = 0;

- val |= HDR_ENDIANNESS_FMASK; /* big endian */ - - /* A QMAP header contains a 6 bit pad field at offset 0. The RMNet - * driver assumes this field is meaningful in packets it receives, - * and assumes the header's payload length includes that padding. - * The RMNet driver does *not* pad packets it sends, however, so - * the pad field (although 0) should be ignored. - */ - if (endpoint->data->qmap && !endpoint->toward_ipa) { - val |= HDR_TOTAL_LEN_OR_PAD_VALID_FMASK; - /* HDR_TOTAL_LEN_OR_PAD is 0 (pad, not total_len) */ - val |= HDR_PAYLOAD_LEN_INC_PADDING_FMASK; - /* HDR_TOTAL_LEN_OR_PAD_OFFSET is 0 */ + if (endpoint->data->qmap) { + /* We have a header, so we must specify its endianness */ + val |= HDR_ENDIANNESS_FMASK; /* big endian */ + + /* A QMAP header contains a 6 bit pad field at offset 0. + * The RMNet driver assumes this field is meaningful in + * packets it receives, and assumes the header's payload + * length includes that padding. The RMNet driver does + * *not* pad packets it sends, however, so the pad field + * (although 0) should be ignored. + */ + if (!endpoint->toward_ipa) { + val |= HDR_TOTAL_LEN_OR_PAD_VALID_FMASK; + /* HDR_TOTAL_LEN_OR_PAD is 0 (pad, not total_len) */ + val |= HDR_PAYLOAD_LEN_INC_PADDING_FMASK; + /* HDR_TOTAL_LEN_OR_PAD_OFFSET is 0 */ + } }

/* HDR_PAYLOAD_LEN_INC_PADDING is 0 */ @@ -738,8 +742,6 @@ static void ipa_endpoint_init_aggr(struct ipa_endpoint *endpoint)

close_eof = endpoint->data->rx.aggr_close_eof; val |= aggr_sw_eof_active_encoded(version, close_eof); - - /* AGGR_HARD_BYTE_LIMIT_ENABLE is 0 */ } else { val |= u32_encode_bits(IPA_ENABLE_DEAGGR, AGGR_EN_FMASK);

From: Guenter Roeck linux@roeck-us.net

[ Upstream commit ddaefa209c4ac791c1262e97c9b2d0440c8ef1d5 ]

Various attempts were made recently to "convert" the old hwmon_device_register() API to devm_hwmon_device_register_with_info() by just changing the function name without actually converting the driver. Prevent this from happening by making the 'chip' parameter of devm_hwmon_device_register_with_info() mandatory.

Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/hwmon/hwmon-kernel-api.rst | 2 +- drivers/hwmon/hwmon.c | 16 +++++++--------- 2 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/Documentation/hwmon/hwmon-kernel-api.rst b/Documentation/hwmon/hwmon-kernel-api.rst index c41eb6108103..23f27fe78e37 100644 --- a/Documentation/hwmon/hwmon-kernel-api.rst +++ b/Documentation/hwmon/hwmon-kernel-api.rst @@ -72,7 +72,7 @@ hwmon_device_register_with_info is the most comprehensive and preferred means to register a hardware monitoring device. It creates the standard sysfs attributes in the hardware monitoring core, letting the driver focus on reading from and writing to the chip instead of having to bother with sysfs attributes. -The parent device parameter cannot be NULL with non-NULL chip info. Its +The parent device parameter as well as the chip parameter must not be NULL. Its parameters are described in more detail below.

devm_hwmon_device_register_with_info is similar to diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index 3ae961986fc3..55237a5fc49a 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -854,11 +854,12 @@ EXPORT_SYMBOL_GPL(hwmon_device_register_with_groups);

/** * hwmon_device_register_with_info - register w/ hwmon - * @dev: the parent device - * @name: hwmon name attribute - * @drvdata: driver data to attach to created device - * @chip: pointer to hwmon chip information + * @dev: the parent device (mandatory) + * @name: hwmon name attribute (mandatory) + * @drvdata: driver data to attach to created device (optional) + * @chip: pointer to hwmon chip information (mandatory) * @extra_groups: pointer to list of additional non-standard attribute groups + * (optional) * * hwmon_device_unregister() must be called when the device is no * longer needed. @@ -871,13 +872,10 @@ hwmon_device_register_with_info(struct device *dev, const char *name, const struct hwmon_chip_info *chip, const struct attribute_group **extra_groups) { - if (!name) - return ERR_PTR(-EINVAL); - - if (chip && (!chip->ops || !chip->ops->is_visible || !chip->info)) + if (!dev || !name || !chip) return ERR_PTR(-EINVAL);

- if (chip && !dev) + if (!chip->ops || !chip->ops->is_visible || !chip->info) return ERR_PTR(-EINVAL);

return __hwmon_device_register(dev, name, drvdata, chip, extra_groups);

From: David Howells dhowells@redhat.com

[ Upstream commit 4ba68c5192554876bd8c3afd904e3064d2915341 ]

If at the end of rxrpc sendmsg() or rxrpc_kernel_send_data() the call that was being given data was aborted remotely or otherwise failed, return an error rather than returning the amount of data buffered for transmission.

The call (presumably) did not complete, so there's not much point continuing with it. AF_RXRPC considers it "complete" and so will be unwilling to do anything else with it - and won't send a notification for it, deeming the return from sendmsg sufficient.

Not returning an error causes afs to incorrectly handle a StoreData operation that gets interrupted by a change of address due to NAT reconfiguration.

This doesn't normally affect most operations since their request parameters tend to fit into a single UDP packet and afs_make_call() returns before the server responds; StoreData is different as it involves transmission of a lot of data.

This can be triggered on a client by doing something like:

dd if=/dev/zero of=/afs/example.com/foo bs=1M count=512

at one prompt, and then changing the network address at another prompt, e.g.:

ifconfig enp6s0 inet 192.168.6.2 && route add 192.168.6.1 dev enp6s0

Tracing packets on an Auristor fileserver looks something like:

192.168.6.1 -> 192.168.6.3 RX 107 ACK Idle Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001 192.168.6.3 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(64538) (64538) 192.168.6.3 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(64538) (64538) 192.168.6.1 -> 192.168.6.3 RX 107 ACK Idle Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001 <ARP exchange for 192.168.6.2> 192.168.6.2 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(0) (0) 192.168.6.2 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(0) (0) 192.168.6.1 -> 192.168.6.2 RX 107 ACK Exceeds Window Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001 192.168.6.1 -> 192.168.6.2 RX 74 ABORT Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001 192.168.6.1 -> 192.168.6.2 RX 74 ABORT Seq: 29321 Call: 4 Source Port: 7000 Destination Port: 7001

The Auristor fileserver logs code -453 (RXGEN_SS_UNMARSHAL), but the abort code received by kafs is -5 (RX_PROTOCOL_ERROR) as the rx layer sees the condition and generates an abort first and the unmarshal error is a consequence of that at the application layer.

Reported-by: Marc Dionne marc.dionne@auristor.com Signed-off-by: David Howells dhowells@redhat.com cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004810.html # v1 Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/rxrpc/sendmsg.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c index af8ad6c30b9f..1d38e279e2ef 100644 --- a/net/rxrpc/sendmsg.c +++ b/net/rxrpc/sendmsg.c @@ -444,6 +444,12 @@ static int rxrpc_send_data(struct rxrpc_sock *rx,

success: ret = copied; + if (READ_ONCE(call->state) == RXRPC_CALL_COMPLETE) { + read_lock_bh(&call->state_lock); + if (call->error < 0) + ret = call->error; + read_unlock_bh(&call->state_lock); + } out: call->tx_pending = skb; _leave(" = %d", ret);

From: David Howells dhowells@redhat.com

[ Upstream commit adc9613ff66c26ebaff9814973181ac178beb90b ]

If a client's address changes, say if it is NAT'd, this can disrupt an in progress operation. For most operations, this is not much of a problem, but StoreData can be different as some servers modify the target file as the data comes in, so if a store request is disrupted, the file can get corrupted on the server.

The problem is that the server doesn't recognise packets that come after the change of address as belonging to the original client and will bounce them, either by sending an OUT_OF_SEQUENCE ACK to the apparent new call if the packet number falls within the initial sequence number window of a call or by sending an EXCEEDS_WINDOW ACK if it falls outside and then aborting it. In both cases, firstPacket will be 1 and previousPacket will be 0 in the ACK information.

Fix this by the following means:

(1) If a client call receives an EXCEEDS_WINDOW ACK with firstPacket as 1 and previousPacket as 0, assume this indicates that the server saw the incoming packets from a different peer and thus as a different call. Fail the call with error -ENETRESET.

(2) Also fail the call if a similar OUT_OF_SEQUENCE ACK occurs if the first packet has been hard-ACK'd. If it hasn't been hard-ACK'd, the ACK packet will cause it to get retransmitted, so the call will just be repeated.

(3) Make afs_select_fileserver() treat -ENETRESET as a straight fail of the operation.

(4) Prioritise the error code over things like -ECONNRESET as the server did actually respond.

(5) Make writeback treat -ENETRESET as a retryable error and make it redirty all the pages involved in a write so that the VM will retry.

Note that there is still a circumstance that I can't easily deal with: if the operation is fully received and processed by the server, but the reply is lost due to address change. There's no way to know if the op happened. We can examine the server, but a conflicting change could have been made by a third party - and we can't tell the difference. In such a case, a message like:

kAFS: vnode modified {100058:146266} b7->b8 YFS.StoreData64 (op=2646a)

will be logged to dmesg on the next op to touch the file and the client will reset the inode state, including invalidating clean parts of the pagecache.

Reported-by: Marc Dionne marc.dionne@auristor.com Signed-off-by: David Howells dhowells@redhat.com cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004811.html # v1 Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/misc.c | 5 ++++- fs/afs/rotate.c | 4 ++++ fs/afs/write.c | 1 + net/rxrpc/input.c | 27 +++++++++++++++++++++++++++ 4 files changed, 36 insertions(+), 1 deletion(-)

diff --git a/fs/afs/misc.c b/fs/afs/misc.c index 1d1a8debe472..933e67fcdab1 100644 --- a/fs/afs/misc.c +++ b/fs/afs/misc.c @@ -163,8 +163,11 @@ void afs_prioritise_error(struct afs_error *e, int error, u32 abort_code) return;

case -ECONNABORTED: + error = afs_abort_to_error(abort_code); + fallthrough; + case -ENETRESET: /* Responded, but we seem to have changed address */ e->responded = true; - e->error = afs_abort_to_error(abort_code); + e->error = error; return; } } diff --git a/fs/afs/rotate.c b/fs/afs/rotate.c index 79e1a5f6701b..a840c3588ebb 100644 --- a/fs/afs/rotate.c +++ b/fs/afs/rotate.c @@ -292,6 +292,10 @@ bool afs_select_fileserver(struct afs_operation *op) op->error = error; goto iterate_address;

+ case -ENETRESET: + pr_warn("kAFS: Peer reset %s (op=%x)\n", + op->type ? op->type->name : "???", op->debug_id); + fallthrough; case -ECONNRESET: _debug("call reset"); op->error = error; diff --git a/fs/afs/write.c b/fs/afs/write.c index f24370f5c774..a75c4742062a 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -626,6 +626,7 @@ static ssize_t afs_write_back_from_locked_page(struct address_space *mapping, case -EKEYEXPIRED: case -EKEYREJECTED: case -EKEYREVOKED: + case -ENETRESET: afs_redirty_pages(wbc, mapping, start, len); mapping_set_error(mapping, ret); break; diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index dc201363f2c4..67d3eba60dc7 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -903,6 +903,33 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb) rxrpc_propose_ack_respond_to_ack); }

+ /* If we get an EXCEEDS_WINDOW ACK from the server, it probably + * indicates that the client address changed due to NAT. The server + * lost the call because it switched to a different peer. + */ + if (unlikely(buf.ack.reason == RXRPC_ACK_EXCEEDS_WINDOW) && + first_soft_ack == 1 && + prev_pkt == 0 && + rxrpc_is_client_call(call)) { + rxrpc_set_call_completion(call, RXRPC_CALL_REMOTELY_ABORTED, + 0, -ENETRESET); + return; + } + + /* If we get an OUT_OF_SEQUENCE ACK from the server, that can also + * indicate a change of address. However, we can retransmit the call + * if we still have it buffered to the beginning. + */ + if (unlikely(buf.ack.reason == RXRPC_ACK_OUT_OF_SEQUENCE) && + first_soft_ack == 1 && + prev_pkt == 0 && + call->tx_hard_ack == 0 && + rxrpc_is_client_call(call)) { + rxrpc_set_call_completion(call, RXRPC_CALL_REMOTELY_ABORTED, + 0, -ENETRESET); + return; + } + /* Discard any out-of-order or duplicate ACKs (outside lock). */ if (!rxrpc_is_ack_valid(call, first_soft_ack, prev_pkt)) { trace_rxrpc_rx_discard_ack(call->debug_id, ack_serial,

From: Uwe Kleine-König u.kleine-koenig@pengutronix.de

[ Upstream commit e0687fe958f763f1790f22ed5483025b7624e744 ]

Returning an error value in an i2c remove callback results in an error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called.

As tpm_cr50_i2c_remove() emits an error message already and the additional error message by the i2c core doesn't add any useful information, change the return value to zero to suppress this error message.

Note that if i2c_clientdata is NULL, there is something really fishy. Assuming no memory corruption happened (then all bets are lost anyhow), tpm_cr50_i2c_remove() is only called after tpm_cr50_i2c_probe() returned successfully. So there was a tpm chip registered before and after tpm_cr50_i2c_remove() its privdata is freed but the associated character device isn't removed. If after that happened userspace accesses the character device it's likely that the freed memory is accessed. For that reason the warning message is made a bit more frightening.

Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Jarkko Sakkinen jarkko@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/tpm/tpm_tis_i2c_cr50.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c index c89278103703..e2ab6a329732 100644 --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c @@ -754,8 +754,8 @@ static int tpm_cr50_i2c_remove(struct i2c_client *client) struct device *dev = &client->dev;

if (!chip) { - dev_err(dev, "Could not get client data at remove\n"); - return -ENODEV; + dev_crit(dev, "Could not get client data at remove, memory corruption ahead\n"); + return 0; }

tpm_chip_unregister(chip);

From: Bob Peterson rpeterso@redhat.com

[ Upstream commit 5fcff61eea9efd1f4b60e89d2d686b5feaea100f ]

Before this patch, functions gfs2_qa_get and _put used the i_rw_mutex to prevent simultaneous access to its i_qadata. But i_rw_mutex is now used for many other things, including iomap_begin and end, which causes a conflict according to lockdep. We cannot just remove the lock since simultaneous opens (gfs2_open -> gfs2_open_common -> gfs2_qa_get) can then stomp on each others values for i_qadata.

This patch solves the conflict by using the i_lock spin_lock in the inode to prevent simultaneous access.

Signed-off-by: Bob Peterson rpeterso@redhat.com Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/gfs2/quota.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c index be0997e24d60..dc77080a82bb 100644 --- a/fs/gfs2/quota.c +++ b/fs/gfs2/quota.c @@ -531,34 +531,42 @@ static void qdsb_put(struct gfs2_quota_data *qd) */ int gfs2_qa_get(struct gfs2_inode *ip) { - int error = 0; struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode); + struct inode *inode = &ip->i_inode;

if (sdp->sd_args.ar_quota == GFS2_QUOTA_OFF) return 0;

- down_write(&ip->i_rw_mutex); + spin_lock(&inode->i_lock); if (ip->i_qadata == NULL) { - ip->i_qadata = kmem_cache_zalloc(gfs2_qadata_cachep, GFP_NOFS); - if (!ip->i_qadata) { - error = -ENOMEM; - goto out; - } + struct gfs2_qadata *tmp; + + spin_unlock(&inode->i_lock); + tmp = kmem_cache_zalloc(gfs2_qadata_cachep, GFP_NOFS); + if (!tmp) + return -ENOMEM; + + spin_lock(&inode->i_lock); + if (ip->i_qadata == NULL) + ip->i_qadata = tmp; + else + kmem_cache_free(gfs2_qadata_cachep, tmp); } ip->i_qadata->qa_ref++; -out: - up_write(&ip->i_rw_mutex); - return error; + spin_unlock(&inode->i_lock); + return 0; }

void gfs2_qa_put(struct gfs2_inode *ip) { - down_write(&ip->i_rw_mutex); + struct inode *inode = &ip->i_inode; + + spin_lock(&inode->i_lock); if (ip->i_qadata && --ip->i_qadata->qa_ref == 0) { kmem_cache_free(gfs2_qadata_cachep, ip->i_qadata); ip->i_qadata = NULL; } - up_write(&ip->i_rw_mutex); + spin_unlock(&inode->i_lock); }

int gfs2_quota_hold(struct gfs2_inode *ip, kuid_t uid, kgid_t gid)