The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x fc1d1a712b517bbcb383b1f1f7ef478e7d0579f2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2024070116-finalize-precise-1679@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

fc1d1a712b51 ("usb: dwc3: core: Workaround for CSR read timeout") f56d0d29b018 ("USB: dwc3: drop dead hibernation code") 3497b9a5c8c3 ("usb: dwc3: add power down scale setting") 0c0a20f6da04 ("usb: dwc3: Simplify with dev_err_probe()")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From fc1d1a712b517bbcb383b1f1f7ef478e7d0579f2 Mon Sep 17 00:00:00 2001 From: Jos Wang joswang@lenovo.com Date: Wed, 19 Jun 2024 19:45:29 +0800 Subject: [PATCH] usb: dwc3: core: Workaround for CSR read timeout

This is a workaround for STAR 4846132, which only affects DWC_usb31 version2.00a operating in host mode.

There is a problem in DWC_usb31 version 2.00a operating in host mode that would cause a CSR read timeout When CSR read coincides with RAM Clock Gating Entry. By disable Clock Gating, sacrificing power consumption for normal operation.

Cc: stable stable@kernel.org # 5.10.x: 1e43c86d: usb: dwc3: core: Add DWC31 version 2.00a controller Signed-off-by: Jos Wang joswang@lenovo.com Acked-by: Thinh Nguyen Thinh.Nguyen@synopsys.com Link: https://lore.kernel.org/r/20240619114529.3441-1-joswang1221@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 9d47c3aa5777..cb82557678dd 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -957,12 +957,16 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc)

static void dwc3_core_setup_global_control(struct dwc3 *dwc) { + unsigned int power_opt; + unsigned int hw_mode; u32 reg;

reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + power_opt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);

- switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { + switch (power_opt) { case DWC3_GHWPARAMS1_EN_PWROPT_CLK: /** * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an @@ -995,6 +999,20 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) break; }

+ /* + * This is a workaround for STAR#4846132, which only affects + * DWC_usb31 version2.00a operating in host mode. + * + * There is a problem in DWC_usb31 version 2.00a operating + * in host mode that would cause a CSR read timeout When CSR + * read coincides with RAM Clock Gating Entry. By disable + * Clock Gating, sacrificing power consumption for normal + * operation. + */ + if (power_opt != DWC3_GHWPARAMS1_EN_PWROPT_NO && + hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && DWC3_VER_IS(DWC31, 200A)) + reg |= DWC3_GCTL_DSBLCLKGTNG; + /* check if current dwc3 is on simulation board */ if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) { dev_info(dwc->dev, "Running with FPGA optimizations\n");