From: Igor Pylypiv ipylypiv@google.com
[ Upstream commit f7b705c238d1483f0a766e2b20010f176e5c0fb7 ]
When a fatal error occurs, a phy down event may not be received to set phy->phy_attached to zero.
Signed-off-by: Igor Pylypiv ipylypiv@google.com Signed-off-by: Salomon Dushimirimana salomondush@google.com Link: https://lore.kernel.org/r/20250319230305.3172920-1-salomondush@google.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/pm8001/pm8001_sas.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 36f5bab09f73e..1215fc36862da 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -893,6 +893,7 @@ static void pm8001_dev_gone_notify(struct domain_device *dev) spin_lock_irqsave(&pm8001_ha->lock, flags); } PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id); + pm8001_ha->phy[pm8001_dev->attached_phy].phy_attached = 0; pm8001_free_dev(pm8001_dev); } else { PM8001_DISC_DBG(pm8001_ha,
From: Meir Elisha meir.elisha@volumez.com
[ Upstream commit b7c178d9e57c8fd4238ff77263b877f6f16182ba ]
During recovery/check operations, the process_checks function loops through available disks to find a 'primary' source with successfully read data.
If no suitable source disk is found after checking all possibilities, the 'primary' index will reach conf->raid_disks * 2. Add an explicit check for this condition after the loop. If no source disk was found, print an error message and return early to prevent further processing without a valid primary source.
Link: https://lore.kernel.org/linux-raid/20250408143808.1026534-1-meir.elisha@volu... Signed-off-by: Meir Elisha meir.elisha@volumez.com Suggested-and-reviewed-by: Yu Kuai yukuai3@huawei.com Signed-off-by: Yu Kuai yukuai3@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/raid1.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index c40237cfdcb0f..395a279e2c885 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -2051,14 +2051,9 @@ static int fix_sync_read_error(struct r1bio *r1_bio) if (!rdev_set_badblocks(rdev, sect, s, 0)) abort = 1; } - if (abort) { - conf->recovery_disabled = - mddev->recovery_disabled; - set_bit(MD_RECOVERY_INTR, &mddev->recovery); - md_done_sync(mddev, r1_bio->sectors, 0); - put_buf(r1_bio); + if (abort) return 0; - } + /* Try next page */ sectors -= s; sect += s; @@ -2198,10 +2193,21 @@ static void sync_request_write(struct mddev *mddev, struct r1bio *r1_bio) int disks = conf->raid_disks * 2; struct bio *wbio;
- if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) - /* ouch - failed to read all of that. */ - if (!fix_sync_read_error(r1_bio)) + if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) { + /* + * ouch - failed to read all of that. + * No need to fix read error for check/repair + * because all member disks are read. + */ + if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) || + !fix_sync_read_error(r1_bio)) { + conf->recovery_disabled = mddev->recovery_disabled; + set_bit(MD_RECOVERY_INTR, &mddev->recovery); + md_done_sync(mddev, r1_bio->sectors, 0); + put_buf(r1_bio); return; + } + }
if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) process_checks(r1_bio);
From: Nathan Chancellor nathan@kernel.org
[ Upstream commit 1413708f990cb7d025affd706ba9c23e2bfc1a27 ]
When building with CONFIG_FORTIFY_SOURCE=y and W=1, there is a warning because of the memcpy() in syscall_get_arguments():
In file included from include/linux/string.h:392, from include/linux/bitmap.h:13, from include/linux/cpumask.h:12, from arch/riscv/include/asm/processor.h:55, from include/linux/sched.h:13, from kernel/ptrace.c:13: In function 'fortify_memcpy_chk', inlined from 'syscall_get_arguments.isra' at arch/riscv/include/asm/syscall.h:66:2: include/linux/fortify-string.h:580:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning] 580 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors
The fortified memcpy() routine enforces that the source is not overread and the destination is not overwritten if the size of either field and the size of the copy are known at compile time. The memcpy() in syscall_get_arguments() intentionally overreads from a1 to a5 in 'struct pt_regs' but this is bigger than the size of a1.
Normally, this could be solved by wrapping a1 through a5 with struct_group() but there was already a struct_group() applied to these members in commit bba547810c66 ("riscv: tracing: Fix __write_overflow_field in ftrace_partial_regs()").
Just avoid memcpy() altogether and write the copying of args from regs manually, which clears up the warning at the expense of three extra lines of code.
Signed-off-by: Nathan Chancellor nathan@kernel.org Reviewed-by: Alexandre Ghiti alexghiti@rivosinc.com Reviewed-by: Dmitry V. Levin ldv@strace.io Link: https://lore.kernel.org/r/20250409-riscv-avoid-fortify-warning-syscall_get_a... Signed-off-by: Alexandre Ghiti alexghiti@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/include/asm/syscall.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/include/asm/syscall.h b/arch/riscv/include/asm/syscall.h index 42347d0981e7e..e53690b30bbeb 100644 --- a/arch/riscv/include/asm/syscall.h +++ b/arch/riscv/include/asm/syscall.h @@ -67,8 +67,11 @@ static inline void syscall_get_arguments(struct task_struct *task, unsigned long *args) { args[0] = regs->orig_a0; - args++; - memcpy(args, ®s->a1, 5 * sizeof(args[0])); + args[1] = regs->a1; + args[2] = regs->a2; + args[3] = regs->a3; + args[4] = regs->a4; + args[5] = regs->a5; }
static inline void syscall_set_arguments(struct task_struct *task,
linux-stable-mirror@lists.linaro.org
-
Sasha Levin