Quoting Lyude Paul (2019-01-28 20:56:01)

When resuming, we check whether or not any previously connected MST topologies are still present and if so, attempt to resume them. If this fails, we disable said MST topologies and fire off a hotplug event so that userspace knows to reprobe.

However, sending a hotplug event involves calling drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a connector reprobe in the caller's thread - something we can't do at the point in which i915 calls drm_dp_mst_topology_mgr_resume() since hotplugging hasn't been fully initialized yet.

This currently causes some rather subtle but fatal issues. For example, on my T480s the laptop dock connected to it usually disappears during a suspend cycle, and comes back up a short while after the system has been resumed. This guarantees pretty much every suspend and resume cycle, drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn, a connector hotplug will occur. Now it's Rute Goldberg time: when the connector hotplug occurs, i915 reprobes /all/ of the connectors, including eDP. However, eDP probing requires that we power on the panel VDD which in turn, grabs a wakeref to the appropriate power domain on the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where things start breaking, since this all happens before intel_power_domains_enable() is called we end up leaking the wakeref that was acquired and never releasing it later. Come next suspend/resume cycle, this causes us to fail to shut down the GPU properly, which causes it not to resume properly and die a horrible complicated death.

(as a note: this only happens when there's both an eDP panel and MST topology connected which is removed mid-suspend. One or the other seems to always be OK).

We could try to fix the VDD wakeref leak, but this doesn't seem like it's worth it at all since we aren't able to handle hotplug detection while resuming anyway. So, let's go with a more robust solution inspired by nouveau: block fbdev from handling hotplug events until we resume fbdev. This allows us to still send sysfs hotplug events to be handled later by user space while we're resuming, while also preventing us from actually processing any hotplug events we receive until it's safe.

This fixes the wakeref leak observed on the T480s and as such, also fixes suspend/resume with MST topologies connected on this machine.

Signed-off-by: Lyude Paul lyude@redhat.com Fixes: 0e32b39ceed6 ("drm/i915: add DP 1.2 MST support (v0.7)") Cc: Todd Previte tprevite@gmail.com Cc: Dave Airlie airlied@redhat.com Cc: Jani Nikula jani.nikula@linux.intel.com Cc: Joonas Lahtinen joonas.lahtinen@linux.intel.com Cc: Rodrigo Vivi rodrigo.vivi@intel.com Cc: Imre Deak imre.deak@intel.com Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org # v3.17+

---

drivers/gpu/drm/i915/intel_drv.h | 10 ++++++++++ drivers/gpu/drm/i915/intel_fbdev.c | 30 +++++++++++++++++++++++++++++- 2 files changed, 39 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 85b913ea6e80..c8549588b2ce 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -213,6 +213,16 @@ struct intel_fbdev { unsigned long vma_flags; async_cookie_t cookie; int preferred_bpp;

•   /* Whether or not fbdev hpd processing is temporarily suspended */
  

•   bool hpd_suspended : 1;
  

•   /* Set when a hotplug was received while HPD processing was
  

•    * suspended
  

•    */
  

•   bool hpd_waiting : 1;
  

•   /* Protects hpd_suspended */
  

•   struct mutex hpd_lock;
  

}; struct intel_encoder { diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c index 8cf3efe88f02..3a6c0bebaaf9 100644 --- a/drivers/gpu/drm/i915/intel_fbdev.c +++ b/drivers/gpu/drm/i915/intel_fbdev.c @@ -681,6 +681,7 @@ int intel_fbdev_init(struct drm_device *dev) if (ifbdev == NULL) return -ENOMEM;

•   mutex_init(&ifbdev->hpd_lock);
    drm_fb_helper_prepare(dev, &ifbdev->helper, &intel_fb_helper_funcs);
  

if (!intel_fbdev_init_bios(dev, ifbdev)) @@ -754,6 +755,23 @@ void intel_fbdev_fini(struct drm_i915_private *dev_priv) intel_fbdev_destroy(ifbdev); } +/* Suspends/resumes fbdev processing of incoming HPD events. When resuming HPD

• • processing, fbdev will perform a full connector reprobe if a hotplug event
• • was received while HPD was suspended.
• */

+static void intel_fbdev_hpd_set_suspend(struct intel_fbdev *ifbdev, int state) +{

•   mutex_lock(&ifbdev->hpd_lock);
  

•   ifbdev->hpd_suspended = state == FBINFO_STATE_SUSPENDED;
  

•   if (ifbdev->hpd_waiting) {
  

•           ifbdev->hpd_waiting = false;
  

•           DRM_DEBUG_KMS("Handling delayed fbcon HPD event\n");
  

•           drm_fb_helper_hotplug_event(&ifbdev->helper);
  

Even when set_suspend(true) ?

Then on resume, we don't care as another hotplug is generated. Calling the hotplug_even from under the mutex feels like unnecessary lock spreading.

•   }
  

•   mutex_unlock(&ifbdev->hpd_lock);
  

I am thinking along the lines of:

bool send_event = false;

mutex_lock(&hpd_lock); ifbdev->hpd_suspended = state == SUSPENDED; send_event = !hpd_suspended && hpd_waiting; hpd_waiting = false; mutex_unlock(&hpd_lock)

if (send_event) { DRM_DEBUG_KMS("Handling delayed fbcon HPD event\n"); drm_fb_helper_hotplug_event(&ifbdev->helper); }

void intel_fbdev_output_poll_changed(struct drm_device *dev) @@ -812,8 +833,15 @@ void intel_fbdev_output_poll_changed(struct drm_device *dev) return; intel_fbdev_sync(ifbdev);

•   if (ifbdev->vma || ifbdev->helper.deferred_setup)
  

•   mutex_lock(&ifbdev->hpd_lock);
  

•   if (ifbdev->hpd_suspended) {
  

•           DRM_DEBUG_KMS("fbdev HPD event deferred until resume\n");
  

•           ifbdev->hpd_waiting = true;
  

•   } else if (ifbdev->vma || ifbdev->helper.deferred_setup) {
            drm_fb_helper_hotplug_event(&ifbdev->helper);
  

•   }
  

Seems ripe for simplification. We can always just set hpd_waiting as it will be reset over suspend, so then we just need a way of tidying up the "am I ready to send" check. -Chris