diff --git a/Makefile b/Makefile index 581f92d635a8..64d12ed10b82 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 4 PATCHLEVEL = 14 -SUBLEVEL = 306 +SUBLEVEL = 307 EXTRAVERSION = NAME = Petit Gorille

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi new file mode 100644 index 000000000000..437dab3fc017 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later +/* + * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2022 Sean Anderson sean.anderson@seco.com + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy0>; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi new file mode 100644 index 000000000000..ad116b17850a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later +/* + * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2022 Sean Anderson sean.anderson@seco.com + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + */ + +fman@400000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy1>; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy1: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi index a97296c64eb2..fda6c9213d9e 100644 --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi @@ -631,8 +631,8 @@ /include/ "qoriq-bman1.dtsi"

/include/ "qoriq-fman3-0.dtsi" -/include/ "qoriq-fman3-0-1g-0.dtsi" -/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-10g-2.dtsi" +/include/ "qoriq-fman3-0-10g-3.dtsi" /include/ "qoriq-fman3-0-1g-2.dtsi" /include/ "qoriq-fman3-0-1g-3.dtsi" /include/ "qoriq-fman3-0-1g-4.dtsi" @@ -681,3 +681,19 @@ interrupts = <16 2 1 9>; }; }; + +&fman0_rx_0x08 { + /delete-property/ fsl,fman-10g-port; +}; + +&fman0_tx_0x28 { + /delete-property/ fsl,fman-10g-port; +}; + +&fman0_rx_0x09 { + /delete-property/ fsl,fman-10g-port; +}; + +&fman0_tx_0x29 { + /delete-property/ fsl,fman-10g-port; +}; diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c index 0e858621eef3..22474ed2ad25 100644 --- a/drivers/net/wireless/marvell/mwifiex/sdio.c +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c @@ -58,6 +58,7 @@ static struct memory_type_mapping mem_type_mapping_tbl[] = { };

static const struct of_device_id mwifiex_sdio_of_match_table[] = { + { .compatible = "marvell,sd8787" }, { .compatible = "marvell,sd8897" }, { .compatible = "marvell,sd8997" }, { } diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index a287c28b38b5..f7c879a7a1be 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -4375,12 +4375,9 @@ void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, u8 macid, bool connect) { -#ifdef RTL8XXXU_GEN2_REPORT_CONNECT /* - * Barry Day reports this causes issues with 8192eu and 8723bu - * devices reconnecting. The reason for this is unclear, but - * until it is better understood, leave the code in place but - * disabled, so it is not lost. + * The firmware turns on the rate control when it knows it's + * connected to a network. */ struct h2c_cmd h2c;

@@ -4393,7 +4390,6 @@ void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, h2c.media_status_rpt.parm &= ~BIT(0);

rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt)); -#endif }

void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv) diff --git a/include/linux/nospec.h b/include/linux/nospec.h index 0c5ef54fd416..207ef2a20e48 100644 --- a/include/linux/nospec.h +++ b/include/linux/nospec.h @@ -9,6 +9,10 @@

struct task_struct;

+#ifndef barrier_nospec +# define barrier_nospec() do { } while (0) +#endif + /** * array_index_mask_nospec() - generate a ~0 mask when index < size, 0 otherwise * @index: array element index diff --git a/include/linux/random.h b/include/linux/random.h index 3feafab498ad..ed75fb2b0ca9 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -19,14 +19,14 @@ void add_input_randomness(unsigned int type, unsigned int code, void add_interrupt_randomness(int irq) __latent_entropy; void add_hwgenerator_randomness(const void *buf, size_t len, size_t entropy);

-#if defined(LATENT_ENTROPY_PLUGIN) && !defined(__CHECKER__) static inline void add_latent_entropy(void) { +#if defined(LATENT_ENTROPY_PLUGIN) && !defined(__CHECKER__) add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy)); -} #else -static inline void add_latent_entropy(void) { } + add_device_randomness(NULL, 0); #endif +}

void get_random_bytes(void *buf, size_t len); size_t __must_check get_random_bytes_arch(void *buf, size_t len); diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index 6a2ba39889bd..56af8a97cf2d 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -476,11 +476,35 @@ u64 alarm_forward(struct alarm *alarm, ktime_t now, ktime_t interval) } EXPORT_SYMBOL_GPL(alarm_forward);

-u64 alarm_forward_now(struct alarm *alarm, ktime_t interval) +static u64 __alarm_forward_now(struct alarm *alarm, ktime_t interval, bool throttle) { struct alarm_base *base = &alarm_bases[alarm->type]; + ktime_t now = base->gettime(); + + if (IS_ENABLED(CONFIG_HIGH_RES_TIMERS) && throttle) { + /* + * Same issue as with posix_timer_fn(). Timers which are + * periodic but the signal is ignored can starve the system + * with a very small interval. The real fix which was + * promised in the context of posix_timer_fn() never + * materialized, but someone should really work on it. + * + * To prevent DOS fake @now to be 1 jiffie out which keeps + * the overrun accounting correct but creates an + * inconsistency vs. timer_gettime(2). + */ + ktime_t kj = NSEC_PER_SEC / HZ; + + if (interval < kj) + now = ktime_add(now, kj); + } + + return alarm_forward(alarm, now, interval); +}

- return alarm_forward(alarm, base->gettime(), interval); +u64 alarm_forward_now(struct alarm *alarm, ktime_t interval) +{ + return __alarm_forward_now(alarm, interval, false); } EXPORT_SYMBOL_GPL(alarm_forward_now);

@@ -554,9 +578,10 @@ static enum alarmtimer_restart alarm_handle_timer(struct alarm *alarm, if (posix_timer_event(ptr, si_private) && ptr->it_interval) { /* * Handle ignored signals and rearm the timer. This will go - * away once we handle ignored signals proper. + * away once we handle ignored signals proper. Ensure that + * small intervals cannot starve the system. */ - ptr->it_overrun += alarm_forward_now(alarm, ptr->it_interval); + ptr->it_overrun += __alarm_forward_now(alarm, ptr->it_interval, true); ++ptr->it_requeue_pending; ptr->it_active = 1; result = ALARMTIMER_RESTART; diff --git a/lib/usercopy.c b/lib/usercopy.c index 3744b2a8e591..1e99c1baf4ff 100644 --- a/lib/usercopy.c +++ b/lib/usercopy.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/uaccess.h> +#include <linux/nospec.h>

/* out-of-line parts */

@@ -9,6 +10,12 @@ unsigned long _copy_from_user(void *to, const void __user *from, unsigned long n unsigned long res = n; might_fault(); if (likely(access_ok(VERIFY_READ, from, n))) { + /* + * Ensure that bad access_ok() speculation will not + * lead to nasty side effects *after* the copy is + * finished: + */ + barrier_nospec(); kasan_check_write(to, n); res = raw_copy_from_user(to, from, n); }