6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Miaoqian Lin linmq006@gmail.com

commit dc89548c6926d68dfdda11bebc1a5258bc41d887 upstream.

The code did not check the return value of usbnet_get_endpoints. Add checks and return the error if it fails to transfer the error.

Found via static anlaysis and this is similar to commit 07161b2416f7 ("sr9800: Add check for usbnet_get_endpoints").

Fixes: 933a27d39e0e ("USB: asix - Add AX88178 support and many other changes") Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://patch.msgid.link/20251026164318.57624-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/usb/asix_devices.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -230,7 +230,9 @@ static int ax88172_bind(struct usbnet *d int i; unsigned long gpio_bits = dev->driver_info->data;

- usbnet_get_endpoints(dev,intf); + ret = usbnet_get_endpoints(dev, intf); + if (ret) + goto out;

/* Toggle the GPIOs in a manufacturer/model specific way */ for (i = 2; i >= 0; i--) { @@ -848,7 +850,9 @@ static int ax88772_bind(struct usbnet *d

dev->driver_priv = priv;

- usbnet_get_endpoints(dev, intf); + ret = usbnet_get_endpoints(dev, intf); + if (ret) + return ret;

/* Maybe the boot loader passed the MAC address via device tree */ if (!eth_platform_get_mac_address(&dev->udev->dev, buf)) { @@ -1281,7 +1285,9 @@ static int ax88178_bind(struct usbnet *d int ret; u8 buf[ETH_ALEN] = {0};

- usbnet_get_endpoints(dev,intf); + ret = usbnet_get_endpoints(dev, intf); + if (ret) + return ret;

/* Get the MAC address */ ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Palmer daniel@0x0f.com

commit 7073c7fc8d8ba47194e5fc58fcafc0efe7586e9b upstream.

Actually check the return value from pll_ops->init_pll() as it can return an error.

If the card's BIOS didn't run because it's not the primary VGA card the fact that the xclk source is unsupported is printed as shown below but the driver continues on regardless and on my machine causes a hard lock up.

[ 61.470088] atyfb 0000:03:05.0: enabling device (0080 -> 0083) [ 61.476191] atyfb: using auxiliary register aperture [ 61.481239] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27] [ 61.487569] atyfb: 512K SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK [ 61.496112] atyfb: Unsupported xclk source: 5.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daniel Palmer daniel@0x0f.com Signed-off-by: Helge Deller deller@gmx.de Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/video/fbdev/aty/atyfb_base.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/video/fbdev/aty/atyfb_base.c +++ b/drivers/video/fbdev/aty/atyfb_base.c @@ -2614,8 +2614,12 @@ static int aty_init(struct fb_info *info pr_cont("\n"); } #endif - if (par->pll_ops->init_pll) - par->pll_ops->init_pll(info, &par->pll); + if (par->pll_ops->init_pll) { + ret = par->pll_ops->init_pll(info, &par->pll); + if (ret) + return ret; + } + if (par->pll_ops->resume_pll) par->pll_ops->resume_pll(info, &par->pll);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kaushlendra Kumar kaushlendra.kumar@intel.com

commit 20594cd104abaaabb676c7a2915b150ae5ff093d upstream.

Make acpi_button_add() call input_free_device() when input_register_device() fails as required according to the documentation of the latter.

Fixes: 0d51157dfaac ("ACPI: button: Eliminate the driver notify callback") Signed-off-by: Kaushlendra Kumar kaushlendra.kumar@intel.com Cc: 6.5+ stable@vger.kernel.org # 6.5+ [ rjw: Subject and changelog rewrite, Fixes: tag ] Link: https://patch.msgid.link/20251006084706.971855-1-kaushlendra.kumar@intel.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/acpi/button.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -613,8 +613,10 @@ static int acpi_button_add(struct acpi_d

input_set_drvdata(input, device); error = input_register_device(input); - if (error) + if (error) { + input_free_device(input); goto err_remove_fs; + }

switch (device->device_type) { case ACPI_BUS_TYPE_POWER_BUTTON:

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Junjie Cao junjie.cao@intel.com

commit 18c4ef4e765a798b47980555ed665d78b71aeadf upstream.

bit_putcs_aligned()/unaligned() derived the glyph pointer from the character value masked by 0xff/0x1ff, which may exceed the actual font's glyph count and read past the end of the built-in font array. Clamp the index to the actual glyph count before computing the address.

This fixes a global out-of-bounds read reported by syzbot.

Reported-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=793cf822d213be1a74f2 Tested-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com Signed-off-by: Junjie Cao junjie.cao@intel.com Reviewed-by: Thomas Zimmermann tzimmermann@suse.de Signed-off-by: Helge Deller deller@gmx.de Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/video/fbdev/core/bitblit.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/video/fbdev/core/bitblit.c +++ b/drivers/video/fbdev/core/bitblit.c @@ -79,12 +79,16 @@ static inline void bit_putcs_aligned(str struct fb_image *image, u8 *buf, u8 *dst) { u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; + unsigned int charcnt = vc->vc_font.charcount; u32 idx = vc->vc_font.width >> 3; u8 *src;

while (cnt--) { - src = vc->vc_font.data + (scr_readw(s++)& - charmask)*cellsize; + u16 ch = scr_readw(s++) & charmask; + + if (ch >= charcnt) + ch = 0; + src = vc->vc_font.data + (unsigned int)ch * cellsize;

if (attr) { update_attr(buf, src, attr, vc); @@ -112,14 +116,18 @@ static inline void bit_putcs_unaligned(s u8 *dst) { u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; + unsigned int charcnt = vc->vc_font.charcount; u32 shift_low = 0, mod = vc->vc_font.width % 8; u32 shift_high = 8; u32 idx = vc->vc_font.width >> 3; u8 *src;

while (cnt--) { - src = vc->vc_font.data + (scr_readw(s++)& - charmask)*cellsize; + u16 ch = scr_readw(s++) & charmask; + + if (ch >= charcnt) + ch = 0; + src = vc->vc_font.data + (unsigned int)ch * cellsize;

if (attr) { update_attr(buf, src, attr, vc);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gokul Sivakumar gokulkumar.sivakumar@infineon.com

commit 3776c685ebe5f43e9060af06872661de55e80b9a upstream.

Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface.

However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash.

[ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)

Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver.

Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion().

And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif.

Cc: stable@vger.kernel.org Fixes: 18e2f61db3b7 ("brcmfmac: P2P action frame tx") Signed-off-by: Gokul Sivakumar gokulkumar.sivakumar@infineon.com Acked-by: Arend van Spriel arend.vanspriel@broadcom.com Link: https://patch.msgid.link/20251013102819.9727-1-gokulkumar.sivakumar@infineon... [Cc stable] Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 3 - drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 28 ++++-------- drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h | 3 - 3 files changed, 12 insertions(+), 22 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -5594,8 +5594,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wip brcmf_dbg(TRACE, "Action frame, cookie=%lld, len=%d, freq=%d\n", *cookie, le16_to_cpu(action_frame->len), freq);

- ack = brcmf_p2p_send_action_frame(cfg, cfg_to_ndev(cfg), - af_params); + ack = brcmf_p2p_send_action_frame(vif->ifp, af_params);

cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, ack, GFP_KERNEL); --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c @@ -1529,6 +1529,7 @@ int brcmf_p2p_notify_action_tx_complete( /** * brcmf_p2p_tx_action_frame() - send action frame over fil. * + * @ifp: interface to transmit on. * @p2p: p2p info struct for vif. * @af_params: action frame data/info. * @@ -1538,12 +1539,11 @@ int brcmf_p2p_notify_action_tx_complete( * The WLC_E_ACTION_FRAME_COMPLETE event will be received when the action * frame is transmitted. */ -static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p, +static s32 brcmf_p2p_tx_action_frame(struct brcmf_if *ifp, + struct brcmf_p2p_info *p2p, struct brcmf_fil_af_params_le *af_params) { struct brcmf_pub *drvr = p2p->cfg->pub; - struct brcmf_cfg80211_vif *vif; - struct brcmf_p2p_action_frame *p2p_af; s32 err = 0;

brcmf_dbg(TRACE, "Enter\n"); @@ -1552,14 +1552,7 @@ static s32 brcmf_p2p_tx_action_frame(str clear_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); clear_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status);

- /* check if it is a p2p_presence response */ - p2p_af = (struct brcmf_p2p_action_frame *)af_params->action_frame.data; - if (p2p_af->subtype == P2P_AF_PRESENCE_RSP) - vif = p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif; - else - vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - - err = brcmf_fil_bsscfg_data_set(vif->ifp, "actframe", af_params, + err = brcmf_fil_bsscfg_data_set(ifp, "actframe", af_params, sizeof(*af_params)); if (err) { bphy_err(drvr, " sending action frame has failed\n"); @@ -1711,16 +1704,14 @@ static bool brcmf_p2p_check_dwell_overfl /** * brcmf_p2p_send_action_frame() - send action frame . * - * @cfg: driver private data for cfg80211 interface. - * @ndev: net device to transmit on. + * @ifp: interface to transmit on. * @af_params: configuration data for action frame. */ -bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, - struct net_device *ndev, +bool brcmf_p2p_send_action_frame(struct brcmf_if *ifp, struct brcmf_fil_af_params_le *af_params) { + struct brcmf_cfg80211_info *cfg = ifp->drvr->config; struct brcmf_p2p_info *p2p = &cfg->p2p; - struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_fil_action_frame_le *action_frame; struct brcmf_config_af_params config_af_params; struct afx_hdl *afx_hdl = &p2p->afx_hdl; @@ -1857,7 +1848,7 @@ bool brcmf_p2p_send_action_frame(struct if (af_params->channel) msleep(P2P_AF_RETRY_DELAY_TIME);

- ack = !brcmf_p2p_tx_action_frame(p2p, af_params); + ack = !brcmf_p2p_tx_action_frame(ifp, p2p, af_params); tx_retry++; dwell_overflow = brcmf_p2p_check_dwell_overflow(requested_dwell, dwell_jiffies); @@ -2217,7 +2208,6 @@ static struct wireless_dev *brcmf_p2p_cr

WARN_ON(p2p_ifp->bsscfgidx != bsscfgidx);

- init_completion(&p2p->send_af_done); INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler); init_completion(&p2p->afx_hdl.act_frm_scan); init_completion(&p2p->wait_next_af); @@ -2513,6 +2503,8 @@ s32 brcmf_p2p_attach(struct brcmf_cfg802 pri_ifp = brcmf_get_ifp(cfg->pub, 0); p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif;

+ init_completion(&p2p->send_af_done); + if (p2pdev_forced) { err_ptr = brcmf_p2p_create_p2pdev(p2p, NULL, NULL); if (IS_ERR(err_ptr)) { --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h @@ -168,8 +168,7 @@ int brcmf_p2p_notify_action_frame_rx(str int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp, const struct brcmf_event_msg *e, void *data); -bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, - struct net_device *ndev, +bool brcmf_p2p_send_action_frame(struct brcmf_if *ifp, struct brcmf_fil_af_params_le *af_params); bool brcmf_p2p_scan_finding_common_channel(struct brcmf_cfg80211_info *cfg, struct brcmf_bss_info_le *bi);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Miaoqian Lin linmq006@gmail.com

commit eb53368f8d6e2dfba84c8a94d245719bcf9ae270 upstream.

The of_find_node_by_name() function returns a device tree node with its reference count incremented. The caller is responsible for calling of_node_put() to release this reference when done.

Found via static analysis.

Fixes: cc5d0189b9ba ("[PATCH] powerpc: Remove device_node addrs/n_addr") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/video/fbdev/valkyriefb.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/video/fbdev/valkyriefb.c +++ b/drivers/video/fbdev/valkyriefb.c @@ -329,11 +329,13 @@ static int __init valkyriefb_init(void)

if (of_address_to_resource(dp, 0, &r)) { printk(KERN_ERR "can't find address for valkyrie\n"); + of_node_put(dp); return 0; }

frame_buffer_phys = r.start; cmap_regs_phys = r.start + 0x304000; + of_node_put(dp); } #endif /* ppc (!CONFIG_MAC) */

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paolo Abeni pabeni@redhat.com

commit a824084b98d8a1dbd6e85d0842a8eb5e73467f59 upstream.

Since commit 72377ab2d671 ("mptcp: more conservative check for zero probes") the MPTCP-level zero window probe check is always disabled, as the TCP-level write queue always contains at least the newly allocated skb.

Refine the relevant check tacking in account that the above condition and that such skb can have zero length.

Fixes: 72377ab2d671 ("mptcp: more conservative check for zero probes") Cc: stable@vger.kernel.org Reported-by: Geliang Tang geliang@kernel.org Closes: https://lore.kernel.org/d0a814c364e744ca6b836ccd5b6e9146882e8d42.camel@kerne... Reviewed-by: Mat Martineau martineau@kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Tested-by: Geliang Tang geliang@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-3-38ffff5a9ec8@k... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mptcp/protocol.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -1340,7 +1340,12 @@ alloc_skb: if (copy == 0) { u64 snd_una = READ_ONCE(msk->snd_una);

- if (snd_una != msk->snd_nxt || tcp_write_queue_tail(ssk)) { + /* No need for zero probe if there are any data pending + * either at the msk or ssk level; skb is the current write + * queue tail and can be empty at this point. + */ + if (snd_una != msk->snd_nxt || skb->len || + skb != tcp_send_head(ssk)) { tcp_remove_empty_skb(ssk); return 0; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Farhan Ali alifm@linux.ibm.com

commit b45873c3f09153d1ad9b3a7bf9e5c0b0387fd2ea upstream.

Commit c1e18c17bda6 ("s390/pci: add zpci_set_irq()/zpci_clear_irq()"), introduced the zpci_set_irq() and zpci_clear_irq(), to be used while resetting a zPCI device.

Commit da995d538d3a ("s390/pci: implement reset_slot for hotplug slot"), mentions zpci_clear_irq() being called in the path for zpci_hot_reset_device(). But that is not the case anymore and these functions are not called outside of this file. Instead zpci_hot_reset_device() relies on zpci_disable_device() also clearing the IRQs, but misses to reset the zdev->irqs_registered flag.

However after a CLP disable/enable reset, the device's IRQ are unregistered, but the flag zdev->irq_registered does not get cleared. It creates an inconsistent state and so arch_restore_msi_irqs() doesn't correctly restore the device's IRQ. This becomes a problem when a PCI driver tries to restore the state of the device through pci_restore_state(). Restore IRQ unconditionally for the device and remove the irq_registered flag as its redundant.

Fixes: c1e18c17bda6 ("s390/pci: add zpci_set_irq()/zpci_clear_irq()") Cc: stable@vger.kernnel.org Reviewed-by: Niklas Schnelle schnelle@linux.ibm.com Reviewed-by: Matthew Rosato mjrosato@linux.ibm.com Signed-off-by: Farhan Ali alifm@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/s390/include/asm/pci.h | 1 - arch/s390/pci/pci_irq.c | 9 +-------- 2 files changed, 1 insertion(+), 9 deletions(-)

--- a/arch/s390/include/asm/pci.h +++ b/arch/s390/include/asm/pci.h @@ -141,7 +141,6 @@ struct zpci_dev { u8 has_resources : 1; u8 is_physfn : 1; u8 util_str_avail : 1; - u8 irqs_registered : 1; u8 tid_avail : 1; u8 reserved : 1; unsigned int devfn; /* DEVFN part of the RID*/ --- a/arch/s390/pci/pci_irq.c +++ b/arch/s390/pci/pci_irq.c @@ -107,9 +107,6 @@ static int zpci_set_irq(struct zpci_dev else rc = zpci_set_airq(zdev);

- if (!rc) - zdev->irqs_registered = 1; - return rc; }

@@ -123,9 +120,6 @@ static int zpci_clear_irq(struct zpci_de else rc = zpci_clear_airq(zdev);

- if (!rc) - zdev->irqs_registered = 0; - return rc; }

@@ -427,8 +421,7 @@ bool arch_restore_msi_irqs(struct pci_de { struct zpci_dev *zdev = to_zpci(pdev);

- if (!zdev->irqs_registered) - zpci_set_irq(zdev); + zpci_set_irq(zdev); return true; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chang S. Bae chang.seok.bae@intel.com

commit 388eff894d6bc5f921e9bfff0e4b0ab2684a96e9 upstream.

Sean reported [1] the following splat when running KVM tests:

WARNING: CPU: 232 PID: 15391 at xfd_validate_state+0x65/0x70 Call Trace: <TASK> fpu__clear_user_states+0x9c/0x100 arch_do_signal_or_restart+0x142/0x210 exit_to_user_mode_loop+0x55/0x100 do_syscall_64+0x205/0x2c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

Chao further identified [2] a reproducible scenario involving signal delivery: a non-AMX task is preempted by an AMX-enabled task which modifies the XFD MSR.

When the non-AMX task resumes and reloads XSTATE with init values, a warning is triggered due to a mismatch between fpstate::xfd and the CPU's current XFD state. fpu__clear_user_states() does not currently re-synchronize the XFD state after such preemption.

Invoke xfd_update_state() which detects and corrects the mismatch if there is a dynamic feature.

This also benefits the sigreturn path, as fpu__restore_sig() may call fpu__clear_user_states() when the sigframe is inaccessible.

[ dhansen: minor changelog munging ]

Closes: https://lore.kernel.org/lkml/aDCo_SczQOUaB2rS@google.com [1] Fixes: 672365477ae8a ("x86/fpu: Update XFD state where required") Reported-by: Sean Christopherson seanjc@google.com Signed-off-by: Chang S. Bae chang.seok.bae@intel.com Signed-off-by: Dave Hansen dave.hansen@linux.intel.com Reviewed-by: Chao Gao chao.gao@intel.com Tested-by: Chao Gao chao.gao@intel.com Link: https://lore.kernel.org/all/aDWbctO%2FRfTGiCg3@intel.com [2] Cc:stable@vger.kernel.org Link: https://patch.msgid.link/20250610001700.4097-1-chang.seok.bae%40intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kernel/fpu/core.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/arch/x86/kernel/fpu/core.c +++ b/arch/x86/kernel/fpu/core.c @@ -757,6 +757,9 @@ void fpu__clear_user_states(struct fpu * !fpregs_state_valid(fpu, smp_processor_id())) os_xrstor_supervisor(fpu->fpstate);

+ /* Ensure XFD state is in sync before reloading XSTATE */ + xfd_update_state(fpu->fpstate); + /* Reset user states in registers. */ restore_fpregs_from_init_fpstate(XFEATURE_MASK_USER_RESTORE);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mark Pearson mpearson-lenovo@squebb.ca

[ Upstream commit 0eb002c93c3b47f88244cecb1e356eaeab61a6bf ]

Lenovo platforms can come with one of two different IDs. The pm_quirk table was missing the second ID for each platform.

Add missing ID and some extra platform identification comments. Reported on https://bugzilla.kernel.org/show_bug.cgi?id=219196

Tested-on: P14s G4 AMD.

Fixes: ce8669a27016 ("wifi: ath11k: determine PM policy based on machine model") Signed-off-by: Mark Pearson mpearson-lenovo@squebb.ca Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219196 Reviewed-by: Baochen Qiang baochen.qiang@oss.qualcomm.com Link: https://patch.msgid.link/20250929192146.1789648-1-mpearson-lenovo@squebb.ca Signed-off-by: Jeff Johnson jeff.johnson@oss.qualcomm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/core.c | 54 +++++++++++++++++++++++--- 1 file changed, 48 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index afac4a1e9a1db..735032c353b2d 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -814,42 +814,84 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { static const struct dmi_system_id ath11k_pm_quirk_table[] = { { .driver_data = (void *)ATH11K_PM_WOW, - .matches = { + .matches = { /* X13 G4 AMD #1 */ + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21J3"), + }, + }, + { + .driver_data = (void *)ATH11K_PM_WOW, + .matches = { /* X13 G4 AMD #2 */ DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "21J4"), }, }, { .driver_data = (void *)ATH11K_PM_WOW, - .matches = { + .matches = { /* T14 G4 AMD #1 */ + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21K3"), + }, + }, + { + .driver_data = (void *)ATH11K_PM_WOW, + .matches = { /* T14 G4 AMD #2 */ DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "21K4"), }, }, { .driver_data = (void *)ATH11K_PM_WOW, - .matches = { + .matches = { /* P14s G4 AMD #1 */ + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21K5"), + }, + }, + { + .driver_data = (void *)ATH11K_PM_WOW, + .matches = { /* P14s G4 AMD #2 */ DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "21K6"), }, }, { .driver_data = (void *)ATH11K_PM_WOW, - .matches = { + .matches = { /* T16 G2 AMD #1 */ + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21K7"), + }, + }, + { + .driver_data = (void *)ATH11K_PM_WOW, + .matches = { /* T16 G2 AMD #2 */ DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "21K8"), }, }, { .driver_data = (void *)ATH11K_PM_WOW, - .matches = { + .matches = { /* P16s G2 AMD #1 */ + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21K9"), + }, + }, + { + .driver_data = (void *)ATH11K_PM_WOW, + .matches = { /* P16s G2 AMD #2 */ DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "21KA"), }, }, { .driver_data = (void *)ATH11K_PM_WOW, - .matches = { + .matches = { /* T14s G4 AMD #1 */ + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "21F8"), + }, + }, + { + .driver_data = (void *)ATH11K_PM_WOW, + .matches = { /* T14s G4 AMD #2 */ DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "21F9"), },

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yu Zhang(Yuriy) quic_yuzha@quicinc.com

[ Upstream commit b78c02f7c7104f1e77ade12ebde267e6fb388ca9 ]

The current code does not have the MU EDCA feature, so it cannot support the use of EDCA by STA in specific UL MU HE TB PPDU transmissions. Refer to IEEE Std 802.11ax-2021 "9.4.2.251 MU EDCA Parameter Set element", "26.2.7 EDCA operation using MU EDCA parameters".

Add ath11k_mac_op_conf_tx_mu_edca() to construct the MU EDCA parameters received from mac80211 into WMI WMM parameters，and send to the firmware according to the different WMM type flags.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04523-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1

Signed-off-by: Yu Zhang (Yuriy) quic_yuzha@quicinc.com Reviewed-by: Vasanthakumar Thiagarajan vasanthakumar.thiagarajan@oss.qualcomm.com Link: https://patch.msgid.link/20250124061343.2263467-1-quic_yuzha@quicinc.com Signed-off-by: Jeff Johnson jeff.johnson@oss.qualcomm.com Stable-dep-of: 9c78e747dd4f ("wifi: ath11k: avoid bit operation on key flags") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/core.h | 3 +- drivers/net/wireless/ath/ath11k/mac.c | 53 +++++++++++++++++++++++++- drivers/net/wireless/ath/ath11k/wmi.c | 11 +++--- drivers/net/wireless/ath/ath11k/wmi.h | 10 ++++- 4 files changed, 67 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h index cd9f9fb6ab68e..7394b46835e1a 100644 --- a/drivers/net/wireless/ath/ath11k/core.h +++ b/drivers/net/wireless/ath/ath11k/core.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. - * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved. */

#ifndef ATH11K_CORE_H @@ -372,6 +372,7 @@ struct ath11k_vif {

u16 tx_seq_no; struct wmi_wmm_params_all_arg wmm_params; + struct wmi_wmm_params_all_arg muedca_params; struct list_head list; union { struct { diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 9db3369d32048..3889f08822d41 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause-Clear /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. - * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved. */

#include <net/mac80211.h> @@ -5283,6 +5283,45 @@ static int ath11k_conf_tx_uapsd(struct ath11k *ar, struct ieee80211_vif *vif, return ret; }

+static int ath11k_mac_op_conf_tx_mu_edca(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + unsigned int link_id, u16 ac, + const struct ieee80211_tx_queue_params *params) +{ + struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif); + struct ath11k *ar = hw->priv; + struct wmi_wmm_params_arg *p; + int ret; + + switch (ac) { + case IEEE80211_AC_VO: + p = &arvif->muedca_params.ac_vo; + break; + case IEEE80211_AC_VI: + p = &arvif->muedca_params.ac_vi; + break; + case IEEE80211_AC_BE: + p = &arvif->muedca_params.ac_be; + break; + case IEEE80211_AC_BK: + p = &arvif->muedca_params.ac_bk; + break; + default: + ath11k_warn(ar->ab, "error ac: %d", ac); + return -EINVAL; + } + + p->cwmin = u8_get_bits(params->mu_edca_param_rec.ecw_min_max, GENMASK(3, 0)); + p->cwmax = u8_get_bits(params->mu_edca_param_rec.ecw_min_max, GENMASK(7, 4)); + p->aifs = u8_get_bits(params->mu_edca_param_rec.aifsn, GENMASK(3, 0)); + p->txop = params->mu_edca_param_rec.mu_edca_timer; + + ret = ath11k_wmi_send_wmm_update_cmd_tlv(ar, arvif->vdev_id, + &arvif->muedca_params, + WMI_WMM_PARAM_TYPE_11AX_MU_EDCA); + return ret; +} + static int ath11k_mac_op_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, unsigned int link_id, u16 ac, @@ -5321,12 +5360,22 @@ static int ath11k_mac_op_conf_tx(struct ieee80211_hw *hw, p->txop = params->txop;

ret = ath11k_wmi_send_wmm_update_cmd_tlv(ar, arvif->vdev_id, - &arvif->wmm_params); + &arvif->wmm_params, + WMI_WMM_PARAM_TYPE_LEGACY); if (ret) { ath11k_warn(ar->ab, "failed to set wmm params: %d\n", ret); goto exit; }

+ if (params->mu_edca) { + ret = ath11k_mac_op_conf_tx_mu_edca(hw, vif, link_id, ac, + params); + if (ret) { + ath11k_warn(ar->ab, "failed to set mu_edca params: %d\n", ret); + goto exit; + } + } + ret = ath11k_conf_tx_uapsd(ar, vif, ac, params->uapsd);

if (ret) diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c index 5f7edf622de7a..98811726d33bf 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.c +++ b/drivers/net/wireless/ath/ath11k/wmi.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause-Clear /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. - * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved. */ #include <linux/skbuff.h> #include <linux/ctype.h> @@ -2662,7 +2662,8 @@ int ath11k_wmi_send_scan_chan_list_cmd(struct ath11k *ar, }

int ath11k_wmi_send_wmm_update_cmd_tlv(struct ath11k *ar, u32 vdev_id, - struct wmi_wmm_params_all_arg *param) + struct wmi_wmm_params_all_arg *param, + enum wmi_wmm_params_type wmm_param_type) { struct ath11k_pdev_wmi *wmi = ar->wmi; struct wmi_vdev_set_wmm_params_cmd *cmd; @@ -2681,7 +2682,7 @@ int ath11k_wmi_send_wmm_update_cmd_tlv(struct ath11k *ar, u32 vdev_id, FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);

cmd->vdev_id = vdev_id; - cmd->wmm_param_type = 0; + cmd->wmm_param_type = wmm_param_type;

for (ac = 0; ac < WME_NUM_AC; ac++) { switch (ac) { @@ -2714,8 +2715,8 @@ int ath11k_wmi_send_wmm_update_cmd_tlv(struct ath11k *ar, u32 vdev_id, wmm_param->no_ack = wmi_wmm_arg->no_ack;

ath11k_dbg(ar->ab, ATH11K_DBG_WMI, - "wmm set ac %d aifs %d cwmin %d cwmax %d txop %d acm %d no_ack %d\n", - ac, wmm_param->aifs, wmm_param->cwmin, + "wmm set type %d ac %d aifs %d cwmin %d cwmax %d txop %d acm %d no_ack %d\n", + wmm_param_type, ac, wmm_param->aifs, wmm_param->cwmin, wmm_param->cwmax, wmm_param->txoplimit, wmm_param->acm, wmm_param->no_ack); } diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h index 30b4b0c176826..9fcffaa2f383c 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.h +++ b/drivers/net/wireless/ath/ath11k/wmi.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. - * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved. */

#ifndef ATH11K_WMI_H @@ -6347,6 +6347,11 @@ enum wmi_sta_keepalive_method { #define WMI_STA_KEEPALIVE_INTERVAL_DEFAULT 30 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0

+enum wmi_wmm_params_type { + WMI_WMM_PARAM_TYPE_LEGACY = 0, + WMI_WMM_PARAM_TYPE_11AX_MU_EDCA = 1, +}; + const void **ath11k_wmi_tlv_parse_alloc(struct ath11k_base *ab, struct sk_buff *skb, gfp_t gfp); int ath11k_wmi_cmd_send(struct ath11k_pdev_wmi *wmi, struct sk_buff *skb, @@ -6403,7 +6408,8 @@ int ath11k_wmi_send_scan_start_cmd(struct ath11k *ar, int ath11k_wmi_send_scan_stop_cmd(struct ath11k *ar, struct scan_cancel_param *param); int ath11k_wmi_send_wmm_update_cmd_tlv(struct ath11k *ar, u32 vdev_id, - struct wmi_wmm_params_all_arg *param); + struct wmi_wmm_params_all_arg *param, + enum wmi_wmm_params_type wmm_param_type); int ath11k_wmi_pdev_suspend(struct ath11k *ar, u32 suspend_opt, u32 pdev_id); int ath11k_wmi_pdev_resume(struct ath11k *ar, u32 pdev_id);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Akhil P Oommen akhilpo@oss.qualcomm.com

[ Upstream commit b4789aac9d3441d9f830f0a4022d8dc122d6cab3 ]

Current parser logic for GMU firmware assumes a dword aligned payload size for every block. This is not true for all GMU firmwares. So, fix this by using correct 'size' value in the calculation for the offset for the next block's header.

Fixes: c6ed04f856a4 ("drm/msm/a6xx: A640/A650 GMU firmware path") Signed-off-by: Akhil P Oommen akhilpo@oss.qualcomm.com Acked-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com Patchwork: https://patchwork.freedesktop.org/patch/674040/ Message-ID: 20250911-assorted-sept-1-v2-2-a8bf1ee20792@oss.qualcomm.com Signed-off-by: Rob Clark robin.clark@oss.qualcomm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c index 8609fa38058ea..bfb1225a47c50 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c @@ -730,6 +730,9 @@ static bool fw_block_mem(struct a6xx_gmu_bo *bo, const struct block_header *blk) return true; }

+#define NEXT_BLK(blk) \ + ((const struct block_header *)((const char *)(blk) + sizeof(*(blk)) + (blk)->size)) + static int a6xx_gmu_fw_load(struct a6xx_gmu *gmu) { struct a6xx_gpu *a6xx_gpu = container_of(gmu, struct a6xx_gpu, gmu); @@ -760,7 +763,7 @@ static int a6xx_gmu_fw_load(struct a6xx_gmu *gmu)

for (blk = (const struct block_header *) fw_image->data; (const u8*) blk < fw_image->data + fw_image->size; - blk = (const struct block_header *) &blk->data[blk->size >> 2]) { + blk = NEXT_BLK(blk)) { if (blk->size == 0) continue;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Richard Fitzgerald rf@opensource.cirrus.com

[ Upstream commit ec20584f25233bfe292c8e18f9a429dfaff58a49 ]

cs-amp-lib-test uses functions from kunit/test-bug.h but wasn't including it.

This error was found by smatch.

Fixes: 177862317a98 ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers") Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Link: https://patch.msgid.link/20251016094844.92796-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs-amp-lib-test.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/cs-amp-lib-test.c b/sound/soc/codecs/cs-amp-lib-test.c index a6e8348a1bd53..1bc43a4cfe09c 100644 --- a/sound/soc/codecs/cs-amp-lib-test.c +++ b/sound/soc/codecs/cs-amp-lib-test.c @@ -6,6 +6,7 @@ // Cirrus Logic International Semiconductor Ltd.

#include <kunit/test.h> +#include <kunit/test-bug.h> #include <kunit/static_stub.h> #include <linux/firmware/cirrus/cs_dsp.h> #include <linux/firmware/cirrus/wmfw.h>

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg johannes.berg@intel.com

[ Upstream commit ed6a47346ec69e7f1659e0a1a3558293f60d5dd7 ]

For keys added by ieee80211_gtk_rekey_add(), we assume that they're already present in the hardware and set the flag KEY_FLAG_UPLOADED_TO_HARDWARE. However, setting this flag needs to be paired with decrementing the tailroom needed, which was missed.

Fixes: f52a0b408ed1 ("wifi: mac80211: mark keys as uploaded when added by the driver") Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://patch.msgid.link/20251019115358.c88eafb4083e.I69e9d4d78a756a133668c5... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/key.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 7809fac6bae5d..b679ef23d28fd 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -508,11 +508,16 @@ static int ieee80211_key_replace(struct ieee80211_sub_if_data *sdata, ret = ieee80211_key_enable_hw_accel(new); } } else { - if (!new->local->wowlan) + if (!new->local->wowlan) { ret = ieee80211_key_enable_hw_accel(new); - else if (link_id < 0 || !sdata->vif.active_links || - BIT(link_id) & sdata->vif.active_links) + } else if (link_id < 0 || !sdata->vif.active_links || + BIT(link_id) & sdata->vif.active_links) { new->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE; + if (!(new->conf.flags & (IEEE80211_KEY_FLAG_GENERATE_MMIC | + IEEE80211_KEY_FLAG_PUT_MIC_SPACE | + IEEE80211_KEY_FLAG_RESERVE_TAILROOM))) + decrease_tailroom_need_count(sdata, 1); + } }

if (ret)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Noorain Eqbal nooraineqbal@gmail.com

[ Upstream commit 4e9077638301816a7d73fa1e1b4c1db4a7e3b59c ]

Fix a race where irq_work can be queued in bpf_ringbuf_commit() but the ring buffer is freed before the work executes. In the syzbot reproducer, a BPF program attached to sched_switch triggers bpf_ringbuf_commit(), queuing an irq_work. If the ring buffer is freed before this work executes, the irq_work thread may accesses freed memory. Calling `irq_work_sync(&rb->work)` ensures that all pending irq_work complete before freeing the buffer.

Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") Reported-by: syzbot+2617fc732430968b45d2@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2617fc732430968b45d2 Tested-by: syzbot+2617fc732430968b45d2@syzkaller.appspotmail.com Signed-off-by: Noorain Eqbal nooraineqbal@gmail.com Link: https://lore.kernel.org/r/20251020180301.103366-1-nooraineqbal@gmail.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/bpf/ringbuf.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/kernel/bpf/ringbuf.c b/kernel/bpf/ringbuf.c index 1499d8caa9a35..1f2c504809023 100644 --- a/kernel/bpf/ringbuf.c +++ b/kernel/bpf/ringbuf.c @@ -215,6 +215,8 @@ static struct bpf_map *ringbuf_map_alloc(union bpf_attr *attr)

static void bpf_ringbuf_free(struct bpf_ringbuf *rb) { + irq_work_sync(&rb->work); + /* copy pages pointer and nr_pages to local variable, as we are going * to unmap rb itself with vunmap() below */

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yonghong Song yonghong.song@linux.dev

[ Upstream commit a76ab5731e32d50ff5b1ae97e9dc4b23f41c23f5 ]

Private stack will be allocated with percpu allocator in jit time. To avoid complexity at runtime, only one copy of private stack is available per cpu per prog. So runtime recursion check is necessary to avoid stack corruption.

Current private stack only supports kprobe/perf_event/tp/raw_tp which has recursion check in the kernel, and prog types that use bpf trampoline recursion check. For trampoline related prog types, currently only tracing progs have recursion checking.

To avoid complexity, all async_cb subprogs use normal kernel stack including those subprogs used by both main prog subtree and async_cb subtree. Any prog having tail call also uses kernel stack.

To avoid jit penalty with private stack support, a subprog stack size threshold is set such that only if the stack size is no less than the threshold, private stack is supported. The current threshold is 64 bytes. This avoids jit penality if the stack usage is small.

A useless 'continue' is also removed from a loop in func check_max_stack_depth().

Signed-off-by: Yonghong Song yonghong.song@linux.dev Link: https://lore.kernel.org/r/20241112163907.2223839-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov ast@kernel.org Stable-dep-of: 881a9c9cb785 ("bpf: Do not audit capability check in do_jit()") Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/bpf_verifier.h | 7 +++ include/linux/filter.h | 1 + kernel/bpf/core.c | 5 ++ kernel/bpf/verifier.c | 96 ++++++++++++++++++++++++++++++++---- 4 files changed, 99 insertions(+), 10 deletions(-)

diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index fb33458f2fc77..1a9b69743cb15 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -654,6 +654,12 @@ struct bpf_subprog_arg_info { }; };

+enum priv_stack_mode { + PRIV_STACK_UNKNOWN, + NO_PRIV_STACK, + PRIV_STACK_ADAPTIVE, +}; + struct bpf_subprog_info { /* 'start' has to be the first field otherwise find_subprog() won't work */ u32 start; /* insn idx of function entry point */ @@ -675,6 +681,7 @@ struct bpf_subprog_info { bool keep_fastcall_stack: 1; bool changes_pkt_data: 1;

+ enum priv_stack_mode priv_stack_mode; u8 arg_cnt; struct bpf_subprog_arg_info args[MAX_BPF_FUNC_REG_ARGS]; }; diff --git a/include/linux/filter.h b/include/linux/filter.h index 5118caf8aa1c7..0477254bc2d30 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -1119,6 +1119,7 @@ bool bpf_jit_supports_exceptions(void); bool bpf_jit_supports_ptr_xchg(void); bool bpf_jit_supports_arena(void); bool bpf_jit_supports_insn(struct bpf_insn *insn, bool in_arena); +bool bpf_jit_supports_private_stack(void); u64 bpf_arch_uaddress_limit(void); void arch_bpf_stack_walk(bool (*consume_fn)(void *cookie, u64 ip, u64 sp, u64 bp), void *cookie); bool bpf_helper_changes_pkt_data(enum bpf_func_id func_id); diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 08bdb623f4f91..76dfa9ab43a5d 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -3094,6 +3094,11 @@ bool __weak bpf_jit_supports_exceptions(void) return false; }

+bool __weak bpf_jit_supports_private_stack(void) +{ + return false; +} + void __weak arch_bpf_stack_walk(bool (*consume_fn)(void *cookie, u64 ip, u64 sp, u64 bp), void *cookie) { } diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 96640a80fd9c4..709151d33e5e4 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -194,6 +194,8 @@ struct bpf_verifier_stack_elem {

#define BPF_GLOBAL_PERCPU_MA_MAX_SIZE 512

+#define BPF_PRIV_STACK_MIN_SIZE 64 + static int acquire_reference_state(struct bpf_verifier_env *env, int insn_idx); static int release_reference(struct bpf_verifier_env *env, int ref_obj_id); static void invalidate_non_owning_refs(struct bpf_verifier_env *env); @@ -6027,6 +6029,34 @@ static int check_ptr_alignment(struct bpf_verifier_env *env, strict); }

+static enum priv_stack_mode bpf_enable_priv_stack(struct bpf_prog *prog) +{ + if (!bpf_jit_supports_private_stack()) + return NO_PRIV_STACK; + + /* bpf_prog_check_recur() checks all prog types that use bpf trampoline + * while kprobe/tp/perf_event/raw_tp don't use trampoline hence checked + * explicitly. + */ + switch (prog->type) { + case BPF_PROG_TYPE_KPROBE: + case BPF_PROG_TYPE_TRACEPOINT: + case BPF_PROG_TYPE_PERF_EVENT: + case BPF_PROG_TYPE_RAW_TRACEPOINT: + return PRIV_STACK_ADAPTIVE; + case BPF_PROG_TYPE_TRACING: + case BPF_PROG_TYPE_LSM: + case BPF_PROG_TYPE_STRUCT_OPS: + if (bpf_prog_check_recur(prog)) + return PRIV_STACK_ADAPTIVE; + fallthrough; + default: + break; + } + + return NO_PRIV_STACK; +} + static int round_up_stack_depth(struct bpf_verifier_env *env, int stack_depth) { if (env->prog->jit_requested) @@ -6044,17 +6074,20 @@ static int round_up_stack_depth(struct bpf_verifier_env *env, int stack_depth) * Since recursion is prevented by check_cfg() this algorithm * only needs a local stack of MAX_CALL_FRAMES to remember callsites */ -static int check_max_stack_depth_subprog(struct bpf_verifier_env *env, int idx) +static int check_max_stack_depth_subprog(struct bpf_verifier_env *env, int idx, + bool priv_stack_supported) { struct bpf_subprog_info *subprog = env->subprog_info; struct bpf_insn *insn = env->prog->insnsi; - int depth = 0, frame = 0, i, subprog_end; + int depth = 0, frame = 0, i, subprog_end, subprog_depth; bool tail_call_reachable = false; int ret_insn[MAX_CALL_FRAMES]; int ret_prog[MAX_CALL_FRAMES]; int j;

i = subprog[idx].start; + if (!priv_stack_supported) + subprog[idx].priv_stack_mode = NO_PRIV_STACK; process_func: /* protect against potential stack overflow that might happen when * bpf2bpf calls get combined with tailcalls. Limit the caller's stack @@ -6081,11 +6114,31 @@ static int check_max_stack_depth_subprog(struct bpf_verifier_env *env, int idx) depth); return -EACCES; } - depth += round_up_stack_depth(env, subprog[idx].stack_depth); - if (depth > MAX_BPF_STACK) { - verbose(env, "combined stack size of %d calls is %d. Too large\n", - frame + 1, depth); - return -EACCES; + + subprog_depth = round_up_stack_depth(env, subprog[idx].stack_depth); + if (priv_stack_supported) { + /* Request private stack support only if the subprog stack + * depth is no less than BPF_PRIV_STACK_MIN_SIZE. This is to + * avoid jit penalty if the stack usage is small. + */ + if (subprog[idx].priv_stack_mode == PRIV_STACK_UNKNOWN && + subprog_depth >= BPF_PRIV_STACK_MIN_SIZE) + subprog[idx].priv_stack_mode = PRIV_STACK_ADAPTIVE; + } + + if (subprog[idx].priv_stack_mode == PRIV_STACK_ADAPTIVE) { + if (subprog_depth > MAX_BPF_STACK) { + verbose(env, "stack size of subprog %d is %d. Too large\n", + idx, subprog_depth); + return -EACCES; + } + } else { + depth += subprog_depth; + if (depth > MAX_BPF_STACK) { + verbose(env, "combined stack size of %d calls is %d. Too large\n", + frame + 1, depth); + return -EACCES; + } } continue_func: subprog_end = subprog[idx + 1].start; @@ -6142,6 +6195,8 @@ static int check_max_stack_depth_subprog(struct bpf_verifier_env *env, int idx) } i = next_insn; idx = sidx; + if (!priv_stack_supported) + subprog[idx].priv_stack_mode = NO_PRIV_STACK;

if (subprog[idx].has_tail_call) tail_call_reachable = true; @@ -6175,7 +6230,8 @@ static int check_max_stack_depth_subprog(struct bpf_verifier_env *env, int idx) */ if (frame == 0) return 0; - depth -= round_up_stack_depth(env, subprog[idx].stack_depth); + if (subprog[idx].priv_stack_mode != PRIV_STACK_ADAPTIVE) + depth -= round_up_stack_depth(env, subprog[idx].stack_depth); frame--; i = ret_insn[frame]; idx = ret_prog[frame]; @@ -6184,16 +6240,36 @@ static int check_max_stack_depth_subprog(struct bpf_verifier_env *env, int idx)

static int check_max_stack_depth(struct bpf_verifier_env *env) { + enum priv_stack_mode priv_stack_mode = PRIV_STACK_UNKNOWN; struct bpf_subprog_info *si = env->subprog_info; + bool priv_stack_supported; int ret;

for (int i = 0; i < env->subprog_cnt; i++) { + if (si[i].has_tail_call) { + priv_stack_mode = NO_PRIV_STACK; + break; + } + } + + if (priv_stack_mode == PRIV_STACK_UNKNOWN) + priv_stack_mode = bpf_enable_priv_stack(env->prog); + + /* All async_cb subprogs use normal kernel stack. If a particular + * subprog appears in both main prog and async_cb subtree, that + * subprog will use normal kernel stack to avoid potential nesting. + * The reverse subprog traversal ensures when main prog subtree is + * checked, the subprogs appearing in async_cb subtrees are already + * marked as using normal kernel stack, so stack size checking can + * be done properly. + */ + for (int i = env->subprog_cnt - 1; i >= 0; i--) { if (!i || si[i].is_async_cb) { - ret = check_max_stack_depth_subprog(env, i); + priv_stack_supported = !i && priv_stack_mode == PRIV_STACK_ADAPTIVE; + ret = check_max_stack_depth_subprog(env, i, priv_stack_supported); if (ret < 0) return ret; } - continue; } return 0; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ondrej Mosnacek omosnace@redhat.com

[ Upstream commit 881a9c9cb7856b24e390fad9f59acfd73b98b3b2 ]

The failure of this check only results in a security mitigation being applied, slightly affecting performance of the compiled BPF program. It doesn't result in a failed syscall, an thus auditing a failed LSM permission check for it is unwanted. For example with SELinux, it causes a denial to be reported for confined processes running as root, which tends to be flagged as a problem to be fixed in the policy. Yet dontauditing or allowing CAP_SYS_ADMIN to the domain may not be desirable, as it would allow/silence also other checks - either going against the principle of least privilege or making debugging potentially harder.

Fix it by changing it from capable() to ns_capable_noaudit(), which instructs the LSMs to not audit the resulting denials.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2369326 Fixes: d4e89d212d40 ("x86/bpf: Call branch history clearing sequence on exit") Signed-off-by: Ondrej Mosnacek omosnace@redhat.com Reviewed-by: Paul Moore paul@paul-moore.com Link: https://lore.kernel.org/r/20251021122758.2659513-1-omosnace@redhat.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/net/bpf_jit_comp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 9a861ac77f8eb..8cbc26081bdb2 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -2453,7 +2453,7 @@ st: if (is_imm8(insn->off)) /* Update cleanup_addr */ ctx->cleanup_addr = proglen; if (bpf_prog_was_classic(bpf_prog) && - !capable(CAP_SYS_ADMIN)) { + !ns_capable_noaudit(&init_user_ns, CAP_SYS_ADMIN)) { u8 *ip = image + addrs[i - 1];

if (emit_spectre_bhb_barrier(&prog, ip, bpf_prog))

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cezary Rojewski cezary.rojewski@intel.com

[ Upstream commit cfca1637bc2b6b1e4f191d2f0b25f12402fbbb26 ]

The pcm->prepare() function may be called multiple times in a row by the userspace, as mentioned in the documentation. The driver shall take that into account and prevent redundancy. However, the exact same function is called during XRUNs and in such case, the particular stream shall be reset and setup anew.

Fixes: 9114700b496c ("ASoC: Intel: avs: Generic PCM FE operations") Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Link: https://patch.msgid.link/20251023092348.3119313-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/avs/pcm.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/sound/soc/intel/avs/pcm.c b/sound/soc/intel/avs/pcm.c index 15defce0f3eb8..3041717632ed0 100644 --- a/sound/soc/intel/avs/pcm.c +++ b/sound/soc/intel/avs/pcm.c @@ -653,6 +653,8 @@ static int avs_dai_fe_prepare(struct snd_pcm_substream *substream, struct snd_so data = snd_soc_dai_get_dma_data(dai, substream); host_stream = data->host_stream;

+ if (runtime->state == SNDRV_PCM_STATE_XRUN) + hdac_stream(host_stream)->prepared = false; if (hdac_stream(host_stream)->prepared) return 0;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shengjiu Wang shengjiu.wang@nxp.com

[ Upstream commit d9fbe5b0bf7e2d1e20d53e4e2274f9f61bdcca98 ]

The DSD little endian format requires the msb first, because oldest bit is in msb. found this issue by testing with pipewire.

Fixes: c111c2ddb3fd ("ASoC: fsl_sai: Add PDM daifmt support") Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Link: https://patch.msgid.link/20251023064538.368850-2-shengjiu.wang@nxp.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/fsl/fsl_sai.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 57614c0b711ea..7e4338762f085 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -321,7 +321,6 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai, break; case SND_SOC_DAIFMT_PDM: val_cr2 |= FSL_SAI_CR2_BCP; - val_cr4 &= ~FSL_SAI_CR4_MF; sai->is_pdm_mode = true; break; case SND_SOC_DAIFMT_RIGHT_J: @@ -606,7 +605,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, val_cr5 |= FSL_SAI_CR5_WNW(slot_width); val_cr5 |= FSL_SAI_CR5_W0W(slot_width);

- if (sai->is_lsb_first || sai->is_pdm_mode) + if (sai->is_lsb_first) val_cr5 |= FSL_SAI_CR5_FBT(0); else val_cr5 |= FSL_SAI_CR5_FBT(word_width - 1);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lizhi Xu lizhi.xu@windriver.com

[ Upstream commit 420c84c330d1688b8c764479e5738bbdbf0a33de ]

The root cause of this issue are: 1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0); put the kevent work in global workqueue. However, the kevent has not yet been scheduled when the usbnet device is unregistered. Therefore, executing free_netdev() results in the "free active object (kevent)" error reported here.

2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(), if the usbnet device is up, ndo_stop() is executed to cancel the kevent. However, because the device is not up, ndo_stop() is not executed.

The solution to this problem is to cancel the kevent before executing free_netdev().

Fixes: a69e617e533e ("usbnet: Fix linkwatch use-after-free on disconnect") Reported-by: Sam Sun samsun1006219@gmail.com Closes: https://syzkaller.appspot.com/bug?extid=8bfd7bcc98f7300afb84 Signed-off-by: Lizhi Xu lizhi.xu@windriver.com Link: https://patch.msgid.link/20251022024007.1831898-1-lizhi.xu@windriver.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/usbnet.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index ccf45ca2feb56..0ff7357c3c91c 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1650,6 +1650,8 @@ void usbnet_disconnect (struct usb_interface *intf) net = dev->net; unregister_netdev (net);

+ cancel_work_sync(&dev->kevent); + while ((urb = usb_get_from_anchor(&dev->deferred))) { dev_kfree_skb(urb->context); kfree(urb->sg);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Iulia Tanasescu iulia.tanasescu@nxp.com

[ Upstream commit 83d328a72eff3268ea4c19deb0a6cf4c7da15746 ]

Currently, hci_conn_hash_lookup_big only checks for BIS master connections, by filtering out connections with the destination address set. This commit updates this function to also consider BIS slave connections, since it is also used for a Broadcast Receiver to set an available BIG handle before issuing the LE BIG Create Sync command.

Signed-off-by: Iulia Tanasescu iulia.tanasescu@nxp.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Stable-dep-of: f0c200a4a537 ("Bluetooth: ISO: Fix BIS connection dst_type handling") Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/bluetooth/hci_core.h | 12 +++++++++++- net/bluetooth/hci_event.c | 1 + net/bluetooth/iso.c | 1 - 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 69a1d8b12beff..ca75c71b58588 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1315,7 +1315,17 @@ static inline struct hci_conn *hci_conn_hash_lookup_big(struct hci_dev *hdev, rcu_read_lock();

list_for_each_entry_rcu(c, &h->list, list) { - if (bacmp(&c->dst, BDADDR_ANY) || c->type != ISO_LINK) + if (c->type != ISO_LINK) + continue; + + /* An ISO_LINK hcon with BDADDR_ANY as destination + * address is a Broadcast connection. A Broadcast + * slave connection is associated with a PA train, + * so the sync_handle can be used to differentiate + * from unicast. + */ + if (bacmp(&c->dst, BDADDR_ANY) && + c->sync_handle == HCI_SYNC_HANDLE_INVALID) continue;

if (handle == c->iso_qos.bcast.big) { diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 1e537ed83ba4b..debe9cc2f72d9 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -6976,6 +6976,7 @@ static void hci_le_big_sync_established_evt(struct hci_dev *hdev, void *data, /* Mark PA sync as established */ set_bit(HCI_CONN_PA_SYNC, &bis->flags);

+ bis->sync_handle = conn->sync_handle; bis->iso_qos.bcast.big = ev->handle; memset(&interval, 0, sizeof(interval)); memcpy(&interval, ev->latency, sizeof(ev->latency)); diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index 2cd0b963c96bd..f48a694b004ab 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -1928,7 +1928,6 @@ static void iso_conn_ready(struct iso_conn *conn) if (!bacmp(&hcon->dst, BDADDR_ANY)) { bacpy(&hcon->dst, &iso_pi(parent)->dst); hcon->dst_type = iso_pi(parent)->dst_type; - hcon->sync_handle = iso_pi(parent)->sync_handle; }

if (ev3) {

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Lu chris.lu@mediatek.com

[ Upstream commit 77343b8b4f87560f8f03e77b98a81ff3a147b262 ]

This patch adds logic to handle power management control when the Bluetooth function is closed during the SDIO reset sequence.

Specifically, if BT is closed before reset, the driver enables the SDIO function and sets driver pmctrl. After reset, if BT remains closed, the driver sets firmware pmctrl and disables the SDIO function.

These changes ensure proper power management and device state consistency across the reset flow.

Fixes: 8fafe702253d ("Bluetooth: mt7921s: support bluetooth reset mechanism") Signed-off-by: Chris Lu chris.lu@mediatek.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/btmtksdio.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c index 13dcc0077732b..206de38fc1c82 100644 --- a/drivers/bluetooth/btmtksdio.c +++ b/drivers/bluetooth/btmtksdio.c @@ -1270,6 +1270,12 @@ static void btmtksdio_cmd_timeout(struct hci_dev *hdev)

sdio_claim_host(bdev->func);

+ /* set drv_pmctrl if BT is closed before doing reset */ + if (!test_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state)) { + sdio_enable_func(bdev->func); + btmtksdio_drv_pmctrl(bdev); + } + sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, NULL); skb_queue_purge(&bdev->txq); cancel_work_sync(&bdev->txrx_work); @@ -1285,6 +1291,12 @@ static void btmtksdio_cmd_timeout(struct hci_dev *hdev) goto err; }

+ /* set fw_pmctrl back if BT is closed after doing reset */ + if (!test_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state)) { + btmtksdio_fw_pmctrl(bdev); + sdio_disable_func(bdev->func); + } + clear_bit(BTMTKSDIO_PATCH_ENABLED, &bdev->tx_state); err: sdio_release_host(bdev->func);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz luiz.von.dentz@intel.com

[ Upstream commit c403da5e98b04a2aec9cfb25cbeeb28d7ce29975 ]

Socket dst_type cannot be directly assigned to hci_conn->type since there domain is different which may lead to the wrong address type being used.

Fixes: 6a5ad251b7cd ("Bluetooth: ISO: Fix possible circular locking dependency") Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/iso.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index c9a262f97678b..a48a2868a728b 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -1939,7 +1939,13 @@ static void iso_conn_ready(struct iso_conn *conn) }

bacpy(&iso_pi(sk)->dst, &hcon->dst); - iso_pi(sk)->dst_type = hcon->dst_type; + + /* Convert from HCI to three-value type */ + if (hcon->dst_type == ADDR_LE_DEV_PUBLIC) + iso_pi(sk)->dst_type = BDADDR_LE_PUBLIC; + else + iso_pi(sk)->dst_type = BDADDR_LE_RANDOM; + iso_pi(sk)->sync_handle = iso_pi(parent)->sync_handle; memcpy(iso_pi(sk)->base, iso_pi(parent)->base, iso_pi(parent)->base_len); iso_pi(sk)->base_len = iso_pi(parent)->base_len;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tomeu Vizoso tomeu@tomeuvizoso.net

[ Upstream commit a042beac6e6f8ac1e923784cfff98b47cbabb185 ]

The current logic uses the flush sequence from the current address space. This is harmless when deducing the flush requirements for the current submit, as either the incoming address space is the same one as the currently active one or we switch context, in which case the flush is unconditional.

However, this sequence is also stored as the current flush sequence of the GPU. If we switch context the stored flush sequence will no longer belong to the currently active address space. This incoherency can then cause missed flushes, resulting in translation errors.

Fixes: 27b67278e007 ("drm/etnaviv: rework MMU handling") Signed-off-by: Tomeu Vizoso tomeu@tomeuvizoso.net Signed-off-by: Lucas Stach l.stach@pengutronix.de Reviewed-by: Christian Gmeiner cgmeiner@igalia.com Link: https://lore.kernel.org/r/20251021093723.3887980-1-l.stach@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/etnaviv/etnaviv_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_buffer.c b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c index b13a17276d07c..88385dc3b30d8 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_buffer.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c @@ -347,7 +347,7 @@ void etnaviv_buffer_queue(struct etnaviv_gpu *gpu, u32 exec_state, u32 link_target, link_dwords; bool switch_context = gpu->exec_state != exec_state; bool switch_mmu_context = gpu->mmu_context != mmu_context; - unsigned int new_flush_seq = READ_ONCE(gpu->mmu_context->flush_seq); + unsigned int new_flush_seq = READ_ONCE(mmu_context->flush_seq); bool need_flush = switch_mmu_context || gpu->flush_seq != new_flush_seq; bool has_blt = !!(gpu->identity.minor_features5 & chipMinorFeatures5_BLT_ENGINE);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jijie Shao shaojijie@huawei.com

[ Upstream commit 03ca7c8c42be913529eb9f188278114430c6abbd ]

Currently, in hclge_mii_ioctl(), the operation to read the PHY register (SIOCGMIIREG) always returns 0.

This patch changes the return type of hclge_read_phy_reg(), returning an error code when the function fails.

Fixes: 024712f51e57 ("net: hns3: add ioctl support for imp-controlled PHYs") Signed-off-by: Jijie Shao shaojijie@huawei.com Reviewed-by: Alexander Lobakin aleksander.lobakin@intel.com Link: https://patch.msgid.link/20251023131338.2642520-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +-- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 9 ++++++--- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h | 2 +- 3 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 407ad0b985b4f..f5eafd1ded413 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -9439,8 +9439,7 @@ static int hclge_mii_ioctl(struct hclge_dev *hdev, struct ifreq *ifr, int cmd) /* this command reads phy id and register at the same time */ fallthrough; case SIOCGMIIREG: - data->val_out = hclge_read_phy_reg(hdev, data->reg_num); - return 0; + return hclge_read_phy_reg(hdev, data->reg_num, &data->val_out);

case SIOCSMIIREG: return hclge_write_phy_reg(hdev, data->reg_num, data->val_in); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c index 80079657afebe..b8dbf932caf94 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c @@ -274,7 +274,7 @@ void hclge_mac_stop_phy(struct hclge_dev *hdev) phy_stop(phydev); }

-u16 hclge_read_phy_reg(struct hclge_dev *hdev, u16 reg_addr) +int hclge_read_phy_reg(struct hclge_dev *hdev, u16 reg_addr, u16 *val) { struct hclge_phy_reg_cmd *req; struct hclge_desc desc; @@ -286,11 +286,14 @@ u16 hclge_read_phy_reg(struct hclge_dev *hdev, u16 reg_addr) req->reg_addr = cpu_to_le16(reg_addr);

ret = hclge_cmd_send(&hdev->hw, &desc, 1); - if (ret) + if (ret) { dev_err(&hdev->pdev->dev, "failed to read phy reg, ret = %d.\n", ret); + return ret; + }

- return le16_to_cpu(req->reg_val); + *val = le16_to_cpu(req->reg_val); + return 0; }

int hclge_write_phy_reg(struct hclge_dev *hdev, u16 reg_addr, u16 val) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h index 4200d0b6d9317..21d434c82475b 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h @@ -13,7 +13,7 @@ int hclge_mac_connect_phy(struct hnae3_handle *handle); void hclge_mac_disconnect_phy(struct hnae3_handle *handle); void hclge_mac_start_phy(struct hclge_dev *hdev); void hclge_mac_stop_phy(struct hclge_dev *hdev); -u16 hclge_read_phy_reg(struct hclge_dev *hdev, u16 reg_addr); +int hclge_read_phy_reg(struct hclge_dev *hdev, u16 reg_addr, u16 *val); int hclge_write_phy_reg(struct hclge_dev *hdev, u16 reg_addr, u16 val);

#endif

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Petr Oros poros@redhat.com

[ Upstream commit 520ad9e96937e825a117e9f00dd35a3e199d67b5 ]

The dpll.yaml spec incorrectly omitted module-name and clock-id from the pin-get operation reply specification, even though the kernel DPLL implementation has always included these attributes in pin-get responses since the initial implementation.

This spec inconsistency caused issues with the C YNL code generator. The generated dpll_pin_get_rsp structure was missing these fields.

Fix the spec by adding module-name and clock-id to the pin-attrs reply specification to match the actual kernel behavior.

Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML") Signed-off-by: Petr Oros poros@redhat.com Reviewed-by: Ivan Vecera ivecera@redhat.com Link: https://patch.msgid.link/20251024185512.363376-1-poros@redhat.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/netlink/specs/dpll.yaml | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml index f2894ca35de84..860350e61edb5 100644 --- a/Documentation/netlink/specs/dpll.yaml +++ b/Documentation/netlink/specs/dpll.yaml @@ -517,6 +517,8 @@ operations: reply: &pin-attrs attributes: - id + - module-name + - clock-id - board-label - panel-label - package-label

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Palmer daniel@0x0f.com

[ Upstream commit 3328443363a0895fd9c096edfe8ecd372ca9145e ]

Since the allocation of the drivers main structure was changed to devm_drm_dev_alloc() rdev is managed by devres and we shouldn't be calling kfree() on it.

This fixes things exploding if the driver probe fails and devres cleans up the rdev after we already free'd it.

Fixes: a9ed2f052c5c ("drm/radeon: change drm_dev_alloc to devm_drm_dev_alloc") Signed-off-by: Daniel Palmer daniel@0x0f.com Signed-off-by: Alex Deucher alexander.deucher@amd.com (cherry picked from commit 16c0681617b8a045773d4d87b6140002fa75b03b) Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/radeon/radeon_kms.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 645e33bf7947e..ba1446acd7032 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -84,7 +84,6 @@ void radeon_driver_unload_kms(struct drm_device *dev) rdev->agp = NULL;

done_free: - kfree(rdev); dev->dev_private = NULL; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yang Wang kevinyang.wang@amd.com

[ Upstream commit 238d468d3ed18a324bb9d8c99f18c665dbac0511 ]

'table_index' is a variable defined by the smu driver (kmd) 'table_id' is a variable defined by the hw smu (pmfw)

This code should use table_index as a bounds check.

Fixes: caad2613dc4bd ("drm/amd/powerplay: move table setting common code to smu_cmn.c") Signed-off-by: Yang Wang kevinyang.wang@amd.com Reviewed-by: Hawking Zhang Hawking.Zhang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com (cherry picked from commit fca0c66b22303de0d1d6313059baf4dc960a4753) Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c b/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c index 0ce1766c859f5..d2f11d82312f0 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c @@ -955,7 +955,7 @@ int smu_cmn_update_table(struct smu_context *smu, table_index); uint32_t table_size; int ret = 0; - if (!table_data || table_id >= SMU_TABLE_COUNT || table_id < 0) + if (!table_data || table_index >= SMU_TABLE_COUNT || table_id < 0) return -EINVAL;

table_size = smu_table->tables[table_index].size;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: John Smith itistotalbotnet@gmail.com

[ Upstream commit 501672e3c1576aa9a8364144213c77b98a31a42c ]

Previously this was initialized with zero which represented PCIe Gen 1.0 instead of using the maximum value from the speed table which is the behaviour of all other smumgr implementations.

Fixes: 18aafc59b106 ("drm/amd/powerplay: implement fw related smu interface for iceland.") Signed-off-by: John Smith itistotalbotnet@gmail.com Signed-off-by: Alex Deucher alexander.deucher@amd.com (cherry picked from commit 92b0a6ae6672857ddeabf892223943d2f0e06c97) Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c b/drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c index 17d2f5bff4a7e..49c32183878de 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c @@ -2028,7 +2028,7 @@ static int iceland_init_smc_table(struct pp_hwmgr *hwmgr) table->VoltageResponseTime = 0; table->PhaseResponseTime = 0; table->MemoryThermThrottleEnable = 1; - table->PCIeBootLinkLevel = 0; + table->PCIeBootLinkLevel = (uint8_t) (data->dpm_table.pcie_speed_table.count); table->PCIeGenInterval = 1;

result = iceland_populate_smc_svi2_config(hwmgr, table);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Damien Le Moal dlemoal@kernel.org

commit 12a1c9353c47c0fb3464eba2d78cdf649dee1cf7 upstream.

REQ_OP_ZONE_RESET_ALL is a zone management request. Fix op_is_zone_mgmt() to return true for that operation, like it already does for REQ_OP_ZONE_RESET.

While no problems were reported without this fix, this change allows strengthening checks in various block device drivers (scsi sd, virtioblk, DM) where op_is_zone_mgmt() is used to verify that a zone management command is not being issued to a regular block device.

Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal dlemoal@kernel.org Reviewed-by: Chaitanya Kulkarni kch@nvidia.com Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Johannes Thumshirn johannes.thumshirn@wdc.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/blk_types.h | 1 + 1 file changed, 1 insertion(+)

--- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -473,6 +473,7 @@ static inline bool op_is_zone_mgmt(enum { switch (op & REQ_OP_MASK) { case REQ_OP_ZONE_RESET: + case REQ_OP_ZONE_RESET_ALL: case REQ_OP_ZONE_OPEN: case REQ_OP_ZONE_CLOSE: case REQ_OP_ZONE_FINISH:

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dapeng Mi dapeng1.mi@linux.intel.com

commit 0ba6502ce167fc3d598c08c2cc3b4ed7ca5aa251 upstream.

When running "perf mem record" command on CWF, the below KASAN global-out-of-bounds warning is seen.

================================================================== BUG: KASAN: global-out-of-bounds in cmt_latency_data+0x176/0x1b0 Read of size 4 at addr ffffffffb721d000 by task dtlb/9850

Call Trace:

kasan_report+0xb8/0xf0 cmt_latency_data+0x176/0x1b0 setup_arch_pebs_sample_data+0xf49/0x2560 intel_pmu_drain_arch_pebs+0x577/0xb00 handle_pmi_common+0x6c4/0xc80

The issue is caused by below code in __grt_latency_data(). The code tries to access x86_hybrid_pmu structure which doesn't exist on non-hybrid platform like CWF.

WARN_ON_ONCE(hybrid_pmu(event->pmu)->pmu_type == hybrid_big)

So add is_hybrid() check before calling this WARN_ON_ONCE to fix the global-out-of-bounds access issue.

Fixes: 090262439f66 ("perf/x86/intel: Rename model-specific pebs_latency_data functions") Reported-by: Xudong Hao xudong.hao@intel.com Signed-off-by: Dapeng Mi dapeng1.mi@linux.intel.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Zide Chen zide.chen@intel.com Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251028064214.1451968-1-dapeng1.mi@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/events/intel/ds.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -305,7 +305,8 @@ static u64 __grt_latency_data(struct per { u64 val;

- WARN_ON_ONCE(hybrid_pmu(event->pmu)->pmu_type == hybrid_big); + WARN_ON_ONCE(is_hybrid() && + hybrid_pmu(event->pmu)->pmu_type == hybrid_big);

dse &= PERF_PEBS_DATA_SOURCE_GRT_MASK; val = hybrid_var(event->pmu, pebs_data_source)[dse];

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Miaoqian Lin linmq006@gmail.com

commit 07ad45e06b4039adf96882aefcb1d3299fb7c305 upstream.

The function has a memory leak when kvrealloc() fails. The function directly assigns NULL to the markers pointer, losing the reference to the previously allocated memory. This causes kvfree() in pt_dump_init() to free NULL instead of the leaked memory.

Fix by: 1. Using kvrealloc() uniformly for all allocations 2. Using a temporary variable to preserve the original pointer until allocation succeeds 3. Removing the error path that sets markers_cnt=0 to keep consistency between markers and markers_cnt

Found via static analysis and this is similar to commit 42378a9ca553 ("bpf, verifier: Fix memory leak in array reallocation for stack state")

Fixes: d0e7915d2ad3 ("s390/mm/ptdump: Generate address marker array dynamically") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/s390/mm/dump_pagetables.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-)

--- a/arch/s390/mm/dump_pagetables.c +++ b/arch/s390/mm/dump_pagetables.c @@ -247,16 +247,14 @@ static int ptdump_cmp(const void *a, con

static int add_marker(unsigned long start, unsigned long end, const char *name) { - size_t oldsize, newsize; + struct addr_marker *new; + size_t newsize;

- oldsize = markers_cnt * sizeof(*markers); - newsize = oldsize + 2 * sizeof(*markers); - if (!oldsize) - markers = kvmalloc(newsize, GFP_KERNEL); - else - markers = kvrealloc(markers, newsize, GFP_KERNEL); - if (!markers) - goto error; + newsize = (markers_cnt + 2) * sizeof(*markers); + new = kvrealloc(markers, newsize, GFP_KERNEL); + if (!new) + return -ENOMEM; + markers = new; markers[markers_cnt].is_start = 1; markers[markers_cnt].start_address = start; markers[markers_cnt].size = end - start; @@ -268,9 +266,6 @@ static int add_marker(unsigned long star markers[markers_cnt].name = name; markers_cnt++; return 0; -error: - markers_cnt = 0; - return -ENOMEM; }

static int pt_dump_init(void)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Zimmermann tzimmermann@suse.de

commit 14e02ed3876f4ab0ed6d3f41972175f8b8df3d70 upstream.

The plane state in __drm_gem_reset_shadow_plane() can be NULL. Do not deref that pointer, but forward NULL to the other plane-reset helpers. Clears plane->state to NULL.

v2: - fix typo in commit description (Javier)

Signed-off-by: Thomas Zimmermann tzimmermann@suse.de Fixes: b71565022031 ("drm/gem: Export implementation of shadow-plane helpers") Reported-by: Dan Carpenter dan.carpenter@linaro.org Closes: https://lore.kernel.org/dri-devel/aPIDAsHIUHp_qSW4@stanley.mountain/ Cc: Thomas Zimmermann tzimmermann@suse.de Cc: Melissa Wen melissa.srw@gmail.com Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Maxime Ripard mripard@kernel.org Cc: David Airlie airlied@gmail.com Cc: Simona Vetter simona@ffwll.ch Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org # v5.15+ Reviewed-by: Javier Martinez Canillas javierm@redhat.com Link: https://patch.msgid.link/20251017091407.58488-1-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/drm_gem_atomic_helper.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/drm_gem_atomic_helper.c +++ b/drivers/gpu/drm/drm_gem_atomic_helper.c @@ -309,8 +309,12 @@ EXPORT_SYMBOL(drm_gem_destroy_shadow_pla void __drm_gem_reset_shadow_plane(struct drm_plane *plane, struct drm_shadow_plane_state *shadow_plane_state) { - __drm_atomic_helper_plane_reset(plane, &shadow_plane_state->base); - drm_format_conv_state_init(&shadow_plane_state->fmtcnv_state); + if (shadow_plane_state) { + __drm_atomic_helper_plane_reset(plane, &shadow_plane_state->base); + drm_format_conv_state_init(&shadow_plane_state->fmtcnv_state); + } else { + __drm_atomic_helper_plane_reset(plane, NULL); + } } EXPORT_SYMBOL(__drm_gem_reset_shadow_plane);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Philipp Stanner phasta@kernel.org

commit e0023c8a74028739643aa14bd201c41a99866ca4 upstream.

nouveau_sched_fini() uses a memory barrier before wait_event(). wait_event(), however, is a macro which expands to a loop which might check the passed condition several times. The barrier would only take effect for the first check.

Replace the barrier with a function which takes the spinlock.

Cc: stable@vger.kernel.org # v6.8+ Fixes: 5f03a507b29e ("drm/nouveau: implement 1:1 scheduler - entity relationship") Acked-by: Danilo Krummrich dakr@kernel.org Signed-off-by: Philipp Stanner phasta@kernel.org Link: https://patch.msgid.link/20251024161221.196155-2-phasta@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/nouveau/nouveau_sched.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/nouveau/nouveau_sched.c +++ b/drivers/gpu/drm/nouveau/nouveau_sched.c @@ -475,6 +475,17 @@ nouveau_sched_create(struct nouveau_sche return 0; }

+static bool +nouveau_sched_job_list_empty(struct nouveau_sched *sched) +{ + bool empty; + + spin_lock(&sched->job.list.lock); + empty = list_empty(&sched->job.list.head); + spin_unlock(&sched->job.list.lock); + + return empty; +}

static void nouveau_sched_fini(struct nouveau_sched *sched) @@ -482,8 +493,7 @@ nouveau_sched_fini(struct nouveau_sched struct drm_gpu_scheduler *drm_sched = &sched->base; struct drm_sched_entity *entity = &sched->entity;

- rmb(); /* for list_empty to work without lock */ - wait_event(sched->job.wq, list_empty(&sched->job.list.head)); + wait_event(sched->job.wq, nouveau_sched_job_list_empty(sched));

drm_sched_entity_fini(entity); drm_sched_fini(drm_sched);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Zimmermann tzimmermann@suse.de

commit a9fb41b5def8e1e0103d5fd1453787993587281e upstream.

Preserve the I/O register bits in __ast_write8_i_masked() as specified by preserve_mask. Accidentally OR-ing the output value into these will overwrite the register's previous settings.

Fixes display output on the AST2300, where the screen can go blank at boot. The driver's original commit 312fec1405dd ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)") already added the broken code. Commit 6f719373b943 ("drm/ast: Blank with VGACR17 sync enable, always clear VGACRB6 sync off") triggered the bug.

Signed-off-by: Thomas Zimmermann tzimmermann@suse.de Reported-by: Peter Schneider pschneider1968@googlemail.com Closes: https://lore.kernel.org/dri-devel/a40caf8e-58ad-4f9c-af7f-54f6f69c29bb@googl... Tested-by: Peter Schneider pschneider1968@googlemail.com Reviewed-by: Jocelyn Falempe jfalempe@redhat.com Fixes: 6f719373b943 ("drm/ast: Blank with VGACR17 sync enable, always clear VGACRB6 sync off") Fixes: 312fec1405dd ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)") Cc: Thomas Zimmermann tzimmermann@suse.de Cc: Nick Bowler nbowler@draconx.ca Cc: Douglas Anderson dianders@chromium.org Cc: Dave Airlie airlied@redhat.com Cc: Jocelyn Falempe jfalempe@redhat.com Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org # v3.5+ Link: https://patch.msgid.link/20251024073626.129032-1-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/ast/ast_drv.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/ast/ast_drv.h +++ b/drivers/gpu/drm/ast/ast_drv.h @@ -286,13 +286,13 @@ static inline void __ast_write8_i(void _ __ast_write8(addr, reg + 1, val); }

-static inline void __ast_write8_i_masked(void __iomem *addr, u32 reg, u8 index, u8 read_mask, +static inline void __ast_write8_i_masked(void __iomem *addr, u32 reg, u8 index, u8 preserve_mask, u8 val) { - u8 tmp = __ast_read8_i_masked(addr, reg, index, read_mask); + u8 tmp = __ast_read8_i_masked(addr, reg, index, preserve_mask);

- tmp |= val; - __ast_write8_i(addr, reg, index, tmp); + val &= ~preserve_mask; + __ast_write8_i(addr, reg, index, tmp | val); }

static inline u32 ast_read32(struct ast_device *ast, u32 reg)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mario Limonciello mario.limonciello@amd.com

commit ba10f8d92a2c026b1052b4c0fa2cd7538838c965 upstream.

[Why] Newer VPE microcode has functionality that will decrease DPM level only when a workload has run for 2 or more seconds. If VPE is turned off before this DPM decrease and the PMFW doesn't reset it when power gating VPE, the SOC can get stuck with a higher DPM level.

This can happen from amdgpu's ring buffer test because it's a short quick workload for VPE and VPE is turned off after 1s.

[How] In idle handler besides checking fences are drained check PMFW version to determine if it will reset DPM when power gating VPE. If PMFW will not do this, then check VPE DPM level. If it is not DPM0 reschedule delayed work again until it is.

v2: squash in return fix (Alex)

Cc: Peyton.Lee@amd.com Reported-by: Sultan Alsawaf sultan@kerneltoast.com Reviewed-by: Sultan Alsawaf sultan@kerneltoast.com Tested-by: Sultan Alsawaf sultan@kerneltoast.com Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4615 Reviewed-by: Lijo Lazar lijo.lazar@amd.com Signed-off-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com (cherry picked from commit 3ac635367eb589bee8edcc722f812a89970e14b7) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c | 34 ++++++++++++++++++++++++++++---- 1 file changed, 30 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c @@ -321,6 +321,26 @@ static int vpe_early_init(void *handle) return 0; }

+static bool vpe_need_dpm0_at_power_down(struct amdgpu_device *adev) +{ + switch (amdgpu_ip_version(adev, VPE_HWIP, 0)) { + case IP_VERSION(6, 1, 1): + return adev->pm.fw_version < 0x0a640500; + default: + return false; + } +} + +static int vpe_get_dpm_level(struct amdgpu_device *adev) +{ + struct amdgpu_vpe *vpe = &adev->vpe; + + if (!adev->pm.dpm_enabled) + return 0; + + return RREG32(vpe_get_reg_offset(vpe, 0, vpe->regs.dpm_request_lv)); +} + static void vpe_idle_work_handler(struct work_struct *work) { struct amdgpu_device *adev = @@ -328,11 +348,17 @@ static void vpe_idle_work_handler(struct unsigned int fences = 0;

fences += amdgpu_fence_count_emitted(&adev->vpe.ring); + if (fences) + goto reschedule; + + if (vpe_need_dpm0_at_power_down(adev) && vpe_get_dpm_level(adev) != 0) + goto reschedule; + + amdgpu_device_ip_set_powergating_state(adev, AMD_IP_BLOCK_TYPE_VPE, AMD_PG_STATE_GATE); + return;

- if (fences == 0) - amdgpu_device_ip_set_powergating_state(adev, AMD_IP_BLOCK_TYPE_VPE, AMD_PG_STATE_GATE); - else - schedule_delayed_work(&adev->vpe.idle_work, VPE_IDLE_TIMEOUT); +reschedule: + schedule_delayed_work(&adev->vpe.idle_work, VPE_IDLE_TIMEOUT); }

static int vpe_common_init(struct amdgpu_vpe *vpe)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Joshua Grisham josh@joshuagrisham.com

[ Upstream commit 6c00f29f74cb2c063b6f31a0b6d73f9db132b9ac ]

Add support for ACPI fans with _FST to report their speed even if they do not support fan control.

As suggested by Armin Wolf [1] and per the Windows Thermal Management Design Guide [2], Samsung Galaxy Book series devices (and possibly many more devices where the Windows guide was strictly followed) only implement the _FST method and do not support ACPI-based fan control.

Currently, these fans are not supported by the kernel driver but this patch will make some very small adjustments to allow them to be supported.

This patch is tested and working for me on a Samsung Galaxy Book2 Pro whose DSDT (and several other Samsung Galaxy Book series notebooks which currently have the same issue) can be found at [3].

Link: https://lore.kernel.org/platform-driver-x86/53c5075b-1967-45d0-937f-463912dd... [1] Link: https://learn.microsoft.com/en-us/windows-hardware/design/device-experiences... [2] Link: https://github.com/joshuagrisham/samsung-galaxybook-extras/tree/8e3087a06b8b... [3]

Signed-off-by: Joshua Grisham josh@joshuagrisham.com Reviewed-by: Armin Wolf W_Armin@gmx.de Link: https://patch.msgid.link/20250222094407.9753-1-josh@joshuagrisham.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Stable-dep-of: d91a1d129b63 ("ACPI: fan: Use platform device for devres-related actions") Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/acpi/fan.h | 1 + drivers/acpi/fan_attr.c | 37 ++++++++++++++++++++++--------------- drivers/acpi/fan_core.c | 25 ++++++++++++++++++------- drivers/acpi/fan_hwmon.c | 8 ++++++++ 4 files changed, 49 insertions(+), 22 deletions(-)

--- a/drivers/acpi/fan.h +++ b/drivers/acpi/fan.h @@ -49,6 +49,7 @@ struct acpi_fan_fst { struct acpi_fan { acpi_handle handle; bool acpi4; + bool has_fst; struct acpi_fan_fif fif; struct acpi_fan_fps *fps; int fps_count; --- a/drivers/acpi/fan_attr.c +++ b/drivers/acpi/fan_attr.c @@ -75,15 +75,6 @@ int acpi_fan_create_attributes(struct ac struct acpi_fan *fan = acpi_driver_data(device); int i, status;

- sysfs_attr_init(&fan->fine_grain_control.attr); - fan->fine_grain_control.show = show_fine_grain_control; - fan->fine_grain_control.store = NULL; - fan->fine_grain_control.attr.name = "fine_grain_control"; - fan->fine_grain_control.attr.mode = 0444; - status = sysfs_create_file(&device->dev.kobj, &fan->fine_grain_control.attr); - if (status) - return status; - /* _FST is present if we are here */ sysfs_attr_init(&fan->fst_speed.attr); fan->fst_speed.show = show_fan_speed; @@ -92,7 +83,19 @@ int acpi_fan_create_attributes(struct ac fan->fst_speed.attr.mode = 0444; status = sysfs_create_file(&device->dev.kobj, &fan->fst_speed.attr); if (status) - goto rem_fine_grain_attr; + return status; + + if (!fan->acpi4) + return 0; + + sysfs_attr_init(&fan->fine_grain_control.attr); + fan->fine_grain_control.show = show_fine_grain_control; + fan->fine_grain_control.store = NULL; + fan->fine_grain_control.attr.name = "fine_grain_control"; + fan->fine_grain_control.attr.mode = 0444; + status = sysfs_create_file(&device->dev.kobj, &fan->fine_grain_control.attr); + if (status) + goto rem_fst_attr;

for (i = 0; i < fan->fps_count; ++i) { struct acpi_fan_fps *fps = &fan->fps[i]; @@ -109,18 +112,18 @@ int acpi_fan_create_attributes(struct ac

for (j = 0; j < i; ++j) sysfs_remove_file(&device->dev.kobj, &fan->fps[j].dev_attr.attr); - goto rem_fst_attr; + goto rem_fine_grain_attr; } }

return 0;

-rem_fst_attr: - sysfs_remove_file(&device->dev.kobj, &fan->fst_speed.attr); - rem_fine_grain_attr: sysfs_remove_file(&device->dev.kobj, &fan->fine_grain_control.attr);

+rem_fst_attr: + sysfs_remove_file(&device->dev.kobj, &fan->fst_speed.attr); + return status; }

@@ -129,9 +132,13 @@ void acpi_fan_delete_attributes(struct a struct acpi_fan *fan = acpi_driver_data(device); int i;

+ sysfs_remove_file(&device->dev.kobj, &fan->fst_speed.attr); + + if (!fan->acpi4) + return; + for (i = 0; i < fan->fps_count; ++i) sysfs_remove_file(&device->dev.kobj, &fan->fps[i].dev_attr.attr);

- sysfs_remove_file(&device->dev.kobj, &fan->fst_speed.attr); sysfs_remove_file(&device->dev.kobj, &fan->fine_grain_control.attr); } --- a/drivers/acpi/fan_core.c +++ b/drivers/acpi/fan_core.c @@ -208,12 +208,16 @@ static const struct thermal_cooling_devi * -------------------------------------------------------------------------- */

+static bool acpi_fan_has_fst(struct acpi_device *device) +{ + return acpi_has_method(device->handle, "_FST"); +} + static bool acpi_fan_is_acpi4(struct acpi_device *device) { return acpi_has_method(device->handle, "_FIF") && acpi_has_method(device->handle, "_FPS") && - acpi_has_method(device->handle, "_FSL") && - acpi_has_method(device->handle, "_FST"); + acpi_has_method(device->handle, "_FSL"); }

static int acpi_fan_get_fif(struct acpi_device *device) @@ -337,7 +341,12 @@ static int acpi_fan_probe(struct platfor device->driver_data = fan; platform_set_drvdata(pdev, fan);

- if (acpi_fan_is_acpi4(device)) { + if (acpi_fan_has_fst(device)) { + fan->has_fst = true; + fan->acpi4 = acpi_fan_is_acpi4(device); + } + + if (fan->acpi4) { result = acpi_fan_get_fif(device); if (result) return result; @@ -345,7 +354,9 @@ static int acpi_fan_probe(struct platfor result = acpi_fan_get_fps(device); if (result) return result; + }

+ if (fan->has_fst) { result = devm_acpi_fan_create_hwmon(device); if (result) return result; @@ -353,9 +364,9 @@ static int acpi_fan_probe(struct platfor result = acpi_fan_create_attributes(device); if (result) return result; + }

- fan->acpi4 = true; - } else { + if (!fan->acpi4) { result = acpi_device_update_power(device, NULL); if (result) { dev_err(&device->dev, "Failed to set initial power state\n"); @@ -401,7 +412,7 @@ err_remove_link: err_unregister: thermal_cooling_device_unregister(cdev); err_end: - if (fan->acpi4) + if (fan->has_fst) acpi_fan_delete_attributes(device);

return result; @@ -411,7 +422,7 @@ static void acpi_fan_remove(struct platf { struct acpi_fan *fan = platform_get_drvdata(pdev);

- if (fan->acpi4) { + if (fan->has_fst) { struct acpi_device *device = ACPI_COMPANION(&pdev->dev);

acpi_fan_delete_attributes(device); --- a/drivers/acpi/fan_hwmon.c +++ b/drivers/acpi/fan_hwmon.c @@ -43,6 +43,10 @@ static umode_t acpi_fan_hwmon_is_visible case hwmon_fan_input: return 0444; case hwmon_fan_target: + /* Only acpi4 fans support fan control. */ + if (!fan->acpi4) + return 0; + /* * When in fine grain control mode, not every fan control value * has an associated fan performance state. @@ -57,6 +61,10 @@ static umode_t acpi_fan_hwmon_is_visible case hwmon_power: switch (attr) { case hwmon_power_input: + /* Only acpi4 fans support fan control. */ + if (!fan->acpi4) + return 0; + /* * When in fine grain control mode, not every fan control value * has an associated fan performance state.

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit hkallweit1@gmail.com

[ Upstream commit b55498ff14bd14860d48dc8d2a0b6889b218c408 ]

If a MAC driver doesn't support EEE, then the PHY shouldn't advertise it. Add phy_disable_eee() for this purpose.

Signed-off-by: Heiner Kallweit hkallweit1@gmail.com Reviewed-by: Andrew Lunn andrew@lunn.ch Link: https://patch.msgid.link/fd51738c-dcd6-4d61-b8c5-faa6ac0f1026@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Stable-dep-of: 84a905290cb4 ("net: phy: dp83867: Disable EEE support as not implemented") Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/phy/phy_device.c | 16 ++++++++++++++++ include/linux/phy.h | 1 + 2 files changed, 17 insertions(+)

--- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -3046,6 +3046,22 @@ void phy_support_eee(struct phy_device * EXPORT_SYMBOL(phy_support_eee);

/** + * phy_disable_eee - Disable EEE for the PHY + * @phydev: Target phy_device struct + * + * This function is used by MAC drivers for MAC's which don't support EEE. + * It disables EEE on the PHY layer. + */ +void phy_disable_eee(struct phy_device *phydev) +{ + linkmode_zero(phydev->supported_eee); + linkmode_zero(phydev->advertising_eee); + phydev->eee_cfg.tx_lpi_enabled = false; + phydev->eee_cfg.eee_enabled = false; +} +EXPORT_SYMBOL_GPL(phy_disable_eee); + +/** * phy_support_sym_pause - Enable support of symmetrical pause * @phydev: target phy_device struct * --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -2030,6 +2030,7 @@ void phy_advertise_eee_all(struct phy_de void phy_support_sym_pause(struct phy_device *phydev); void phy_support_asym_pause(struct phy_device *phydev); void phy_support_eee(struct phy_device *phydev); +void phy_disable_eee(struct phy_device *phydev); void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx, bool autoneg); void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tejun Heo tj@kernel.org

[ Upstream commit 54e96258a6930909b690fd7e8889749231ba8085 ]

scx_bpf_dsq_move_set_slice() and scx_bpf_dsq_move_set_vtime() take a DSQ iterator argument which has to be valid. Mark them with KF_RCU.

Fixes: 4c30f5ce4f7a ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()") Cc: stable@vger.kernel.org # v6.12+ Acked-by: Andrea Righi arighi@nvidia.com Signed-off-by: Tejun Heo tj@kernel.org [ scx_bpf_dsq_move_set_* => scx_bpf_dispatch_from_dsq_set_* ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/sched/ext.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/kernel/sched/ext.c +++ b/kernel/sched/ext.c @@ -6493,8 +6493,8 @@ BTF_KFUNCS_START(scx_kfunc_ids_dispatch) BTF_ID_FLAGS(func, scx_bpf_dispatch_nr_slots) BTF_ID_FLAGS(func, scx_bpf_dispatch_cancel) BTF_ID_FLAGS(func, scx_bpf_consume) -BTF_ID_FLAGS(func, scx_bpf_dispatch_from_dsq_set_slice) -BTF_ID_FLAGS(func, scx_bpf_dispatch_from_dsq_set_vtime) +BTF_ID_FLAGS(func, scx_bpf_dispatch_from_dsq_set_slice, KF_RCU) +BTF_ID_FLAGS(func, scx_bpf_dispatch_from_dsq_set_vtime, KF_RCU) BTF_ID_FLAGS(func, scx_bpf_dispatch_from_dsq, KF_RCU) BTF_ID_FLAGS(func, scx_bpf_dispatch_vtime_from_dsq, KF_RCU) BTF_KFUNCS_END(scx_kfunc_ids_dispatch) @@ -6593,8 +6593,8 @@ __bpf_kfunc_end_defs();

BTF_KFUNCS_START(scx_kfunc_ids_unlocked) BTF_ID_FLAGS(func, scx_bpf_create_dsq, KF_SLEEPABLE) -BTF_ID_FLAGS(func, scx_bpf_dispatch_from_dsq_set_slice) -BTF_ID_FLAGS(func, scx_bpf_dispatch_from_dsq_set_vtime) +BTF_ID_FLAGS(func, scx_bpf_dispatch_from_dsq_set_slice, KF_RCU) +BTF_ID_FLAGS(func, scx_bpf_dispatch_from_dsq_set_vtime, KF_RCU) BTF_ID_FLAGS(func, scx_bpf_dispatch_from_dsq, KF_RCU) BTF_ID_FLAGS(func, scx_bpf_dispatch_vtime_from_dsq, KF_RCU) BTF_KFUNCS_END(scx_kfunc_ids_unlocked)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Rafael J. Wysocki" rafael.j.wysocki@intel.com

[ Upstream commit db86f55bf81a3a297be05ee8775ae9a8c6e3a599 ]

A throughput regression of 11% introduced by commit 779b1a1cb13a ("cpuidle: governors: menu: Avoid selecting states with too much latency") has been reported and it is related to the case when the menu governor checks if selecting a proper idle state instead of a polling one makes sense.

In particular, it is questionable to do so if the exit latency of the idle state in question exceeds the predicted idle duration, so add a check for that, which is sufficient to make the reported regression go away, and update the related code comment accordingly.

Fixes: 779b1a1cb13a ("cpuidle: governors: menu: Avoid selecting states with too much latency") Closes: https://lore.kernel.org/linux-pm/004501dc43c9%24ec8aa930%24c59ffb90%24@telus... Reported-by: Doug Smythies dsmythies@telus.net Tested-by: Doug Smythies dsmythies@telus.net Cc: All applicable stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Reviewed-by: Christian Loehle christian.loehle@arm.com Link: https://patch.msgid.link/12786727.O9o76ZdvQC@rafael.j.wysocki Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/cpuidle/governors/menu.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -324,10 +324,13 @@ static int menu_select(struct cpuidle_dr

/* * Use a physical idle state, not busy polling, unless a timer - * is going to trigger soon enough. + * is going to trigger soon enough or the exit latency of the + * idle state in question is greater than the predicted idle + * duration. */ if ((drv->states[idx].flags & CPUIDLE_FLAG_POLLING) && - s->target_residency_ns <= data->next_timer_ns) { + s->target_residency_ns <= data->next_timer_ns && + s->exit_latency_ns <= predicted_ns) { predicted_ns = s->target_residency_ns; idx = i; break;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gregory Price gourry@gourry.net

commit 607b9fb2ce248cc5b633c5949e0153838992c152 upstream.

There's an issue with RDSEED's 16-bit and 32-bit register output variants on Zen5 which return a random value of 0 "at a rate inconsistent with randomness while incorrectly signaling success (CF=1)". Search the web for AMD-SB-7055 for more detail.

Add a fix glue which checks microcode revisions.

[ bp: Add microcode revisions checking, rewrite. ]

Cc: stable@vger.kernel.org Signed-off-by: Gregory Price gourry@gourry.net Signed-off-by: Borislav Petkov (AMD) bp@alien8.de Link: https://lore.kernel.org/r/20251018024010.4112396-1-gourry@gourry.net [ bp: 6.12 backport: use the alternative microcode version checking. ] Signed-off-by: Borislav Petkov (AMD) bp@alien8.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kernel/cpu/amd.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)

--- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -1018,8 +1018,43 @@ static void init_amd_zen4(struct cpuinfo } }

+static bool check_rdseed_microcode(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + union zen_patch_rev p; + u32 min_rev = 0; + + p.ext_fam = c->x86 - 0xf; + p.model = c->x86_model; + p.ext_model = c->x86_model >> 4; + p.stepping = c->x86_stepping; + /* reserved bits are expected to be 0 in test below */ + p.__reserved = 0; + + if (cpu_has(c, X86_FEATURE_ZEN5)) { + switch (p.ucode_rev >> 8) { + case 0xb0021: min_rev = 0xb00215a; break; + case 0xb1010: min_rev = 0xb101054; break; + default: + pr_debug("%s: ucode_rev: 0x%x, current revision: 0x%x\n", + __func__, p.ucode_rev, c->microcode); + return false; + } + } + + if (!min_rev) + return false; + + return c->microcode >= min_rev; +} + static void init_amd_zen5(struct cpuinfo_x86 *c) { + if (!check_rdseed_microcode()) { + clear_cpu_cap(c, X86_FEATURE_RDSEED); + msr_clear_bit(MSR_AMD64_CPUID_FN_7, 18); + pr_emerg_once("RDSEED32 is broken. Disabling the corresponding CPUID bit.\n"); + } }

static void init_amd(struct cpuinfo_x86 *c)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tvrtko Ursulin tvrtko.ursulin@igalia.com

[ Upstream commit d42a254633c773921884a19e8a1a0f53a31150c3 ]

In FIFO mode (which is the default), both drm_sched_entity_push_job() and drm_sched_rq_update_fifo(), where the latter calls the former, are currently taking and releasing the same entity->rq_lock.

We can avoid that design inelegance, and also have a miniscule efficiency improvement on the submit from idle path, by introducing a new drm_sched_rq_update_fifo_locked() helper and pulling up the lock taking to its callers.

v2: * Remove drm_sched_rq_update_fifo() altogether. (Christian)

v3: * Improved commit message. (Philipp)

Signed-off-by: Tvrtko Ursulin tvrtko.ursulin@igalia.com Cc: Christian König christian.koenig@amd.com Cc: Alex Deucher alexander.deucher@amd.com Cc: Luben Tuikov ltuikov89@gmail.com Cc: Matthew Brost matthew.brost@intel.com Cc: Philipp Stanner pstanner@redhat.com Reviewed-by: Christian König christian.koenig@amd.com Signed-off-by: Philipp Stanner pstanner@redhat.com Link: https://patchwork.freedesktop.org/patch/msgid/20241016122013.7857-2-tursulin... Stable-dep-of: d25e3a610bae ("drm/sched: Fix race in drm_sched_entity_select_rq()") Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/scheduler/sched_entity.c | 13 +++++++++---- drivers/gpu/drm/scheduler/sched_main.c | 6 +++--- include/drm/gpu_scheduler.h | 2 +- 3 files changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/gpu/drm/scheduler/sched_entity.c +++ b/drivers/gpu/drm/scheduler/sched_entity.c @@ -506,8 +506,12 @@ struct drm_sched_job *drm_sched_entity_p struct drm_sched_job *next;

next = to_drm_sched_job(spsc_queue_peek(&entity->job_queue)); - if (next) - drm_sched_rq_update_fifo(entity, next->submit_ts); + if (next) { + spin_lock(&entity->rq_lock); + drm_sched_rq_update_fifo_locked(entity, + next->submit_ts); + spin_unlock(&entity->rq_lock); + } }

/* Jobs and entities might have different lifecycles. Since we're @@ -607,10 +611,11 @@ void drm_sched_entity_push_job(struct dr sched = rq->sched;

drm_sched_rq_add_entity(rq, entity); - spin_unlock(&entity->rq_lock);

if (drm_sched_policy == DRM_SCHED_POLICY_FIFO) - drm_sched_rq_update_fifo(entity, submit_ts); + drm_sched_rq_update_fifo_locked(entity, submit_ts); + + spin_unlock(&entity->rq_lock);

drm_sched_wakeup(sched); } --- a/drivers/gpu/drm/scheduler/sched_main.c +++ b/drivers/gpu/drm/scheduler/sched_main.c @@ -169,14 +169,15 @@ static inline void drm_sched_rq_remove_f } }

-void drm_sched_rq_update_fifo(struct drm_sched_entity *entity, ktime_t ts) +void drm_sched_rq_update_fifo_locked(struct drm_sched_entity *entity, ktime_t ts) { /* * Both locks need to be grabbed, one to protect from entity->rq change * for entity from within concurrent drm_sched_entity_select_rq and the * other to update the rb tree structure. */ - spin_lock(&entity->rq_lock); + lockdep_assert_held(&entity->rq_lock); + spin_lock(&entity->rq->lock);

drm_sched_rq_remove_fifo_locked(entity); @@ -187,7 +188,6 @@ void drm_sched_rq_update_fifo(struct drm drm_sched_entity_compare_before);

spin_unlock(&entity->rq->lock); - spin_unlock(&entity->rq_lock); }

/** --- a/include/drm/gpu_scheduler.h +++ b/include/drm/gpu_scheduler.h @@ -593,7 +593,7 @@ void drm_sched_rq_add_entity(struct drm_ void drm_sched_rq_remove_entity(struct drm_sched_rq *rq, struct drm_sched_entity *entity);

-void drm_sched_rq_update_fifo(struct drm_sched_entity *entity, ktime_t ts); +void drm_sched_rq_update_fifo_locked(struct drm_sched_entity *entity, ktime_t ts);

int drm_sched_entity_init(struct drm_sched_entity *entity, enum drm_sched_priority priority,

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gerd Bayer gbayer@linux.ibm.com

[ Upstream commit 0fd20f65df6aa430454a0deed8f43efa91c54835 ]

Do not block PCI config accesses through pci_cfg_access_lock() when executing the s390 variant of PCI error recovery: Acquire just device_lock() instead of pci_dev_lock() as powerpc's EEH and generig PCI AER processing do.

During error recovery testing a pair of tasks was reported to be hung:

mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not working INFO: task kmcheck:72 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000 Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<000000065256f572>] schedule_preempt_disabled+0x22/0x30 [<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8 [<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core] [<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core] [<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398 [<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0 INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000 Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<0000000652172e28>] pci_wait_cfg+0x80/0xe8 [<0000000652172f94>] pci_cfg_access_lock+0x74/0x88 [<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core] [<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core] [<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core] [<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168 [<0000000652513212>] devlink_health_report+0x19a/0x230 [<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core]

No kernel log of the exact same error with an upstream kernel is available - but the very same deadlock situation can be constructed there, too:

- task: kmcheck mlx5_unload_one() tries to acquire devlink lock while the PCI error recovery code has set pdev->block_cfg_access by way of pci_cfg_access_lock() - task: kworker mlx5_crdump_collect() tries to set block_cfg_access through pci_cfg_access_lock() while devlink_health_report() had acquired the devlink lock.

A similar deadlock situation can be reproduced by requesting a crdump with

devlink health dump show pci/<BDF> reporter fw_fatal

while PCI error recovery is executed on the same <BDF> physical function by mlx5_core's pci_error_handlers. On s390 this can be injected with

zpcictl --reset-fw <BDF>

Tests with this patch failed to reproduce that second deadlock situation, the devlink command is rejected with "kernel answers: Permission denied" - and we get a kernel log message of:

mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5

because the config read of VSC_SEMAPHORE is rejected by the underlying hardware.

Two prior attempts to address this issue have been discussed and ultimately rejected [see link], with the primary argument that s390's implementation of PCI error recovery is imposing restrictions that neither powerpc's EEH nor PCI AER handling need. Tests show that PCI error recovery on s390 is running to completion even without blocking access to PCI config space.

Link: https://lore.kernel.org/all/20251007144826.2825134-1-gbayer@linux.ibm.com/ Cc: stable@vger.kernel.org Fixes: 4cdf2f4e24ff ("s390/pci: implement minimal PCI error recovery") Reviewed-by: Niklas Schnelle schnelle@linux.ibm.com Signed-off-by: Gerd Bayer gbayer@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com [ Adjust context ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/s390/pci/pci_event.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/s390/pci/pci_event.c +++ b/arch/s390/pci/pci_event.c @@ -180,7 +180,7 @@ static pci_ers_result_t zpci_event_attem * is unbound or probed and that userspace can't access its * configuration space while we perform recovery. */ - pci_dev_lock(pdev); + device_lock(&pdev->dev); if (pdev->error_state == pci_channel_io_perm_failure) { ers_res = PCI_ERS_RESULT_DISCONNECT; goto out_unlock; @@ -228,7 +228,7 @@ static pci_ers_result_t zpci_event_attem if (driver->err_handler->resume) driver->err_handler->resume(pdev); out_unlock: - pci_dev_unlock(pdev); + device_unlock(&pdev->dev);

return ers_res; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ryan Chen ryan_chen@aspeedtech.com

[ Upstream commit c30dcfd4b5a0f0e3fe7138bf287f6de6b1b00278 ]

Extend the ASPEED SoC info driver to support AST27XX silicon IDs.

Signed-off-by: Ryan Chen ryan_chen@aspeedtech.com Link: https://patch.msgid.link/20250807005208.3517283-1-ryan_chen@aspeedtech.com Signed-off-by: Andrew Jeffery andrew@codeconstruct.com.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/aspeed/aspeed-socinfo.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/soc/aspeed/aspeed-socinfo.c b/drivers/soc/aspeed/aspeed-socinfo.c index 3f759121dc00a..67e9ac3d08ecc 100644 --- a/drivers/soc/aspeed/aspeed-socinfo.c +++ b/drivers/soc/aspeed/aspeed-socinfo.c @@ -27,6 +27,10 @@ static struct { { "AST2620", 0x05010203 }, { "AST2605", 0x05030103 }, { "AST2625", 0x05030403 }, + /* AST2700 */ + { "AST2750", 0x06000003 }, + { "AST2700", 0x06000103 }, + { "AST2720", 0x06000203 }, };

static const char *siliconid_to_name(u32 siliconid)

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jens Reidel adrian@mainlining.org

[ Upstream commit 19e7aa0e9e46d0ad111a4af55b3d681b6ad945e0 ]

Add a missing le32_to_cpu when accessing num_entries, which is always a little endian integer.

Fixes booting on Xiaomi Mi 9T (xiaomi-davinci) in big endian.

Signed-off-by: Jens Reidel adrian@mainlining.org Link: https://lore.kernel.org/r/20250726235646.254730-1-adrian@mainlining.org Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/qcom/smem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c index e4411771f482f..db77642776f93 100644 --- a/drivers/soc/qcom/smem.c +++ b/drivers/soc/qcom/smem.c @@ -892,7 +892,7 @@ static u32 qcom_smem_get_item_count(struct qcom_smem *smem) if (IS_ERR_OR_NULL(ptable)) return SMEM_ITEM_COUNT;

- info = (struct smem_info *)&ptable->entry[ptable->num_entries]; + info = (struct smem_info *)&ptable->entry[le32_to_cpu(ptable->num_entries)]; if (memcmp(info->magic, SMEM_INFO_MAGIC, sizeof(info->magic))) return SMEM_ITEM_COUNT;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Weißschuh thomas.weissschuh@linutronix.de

[ Upstream commit a5039648f86424885aae37f03dc39bc9cb972ecb ]

In the past %pK was preferable to %p as it would not leak raw pointer values into the kernel log. Since commit ad67b74d2469 ("printk: hash addresses printed with %p") the regular %p has been improved to avoid this issue. Furthermore, restricted pointers ("%pK") were never meant to be used through printk(). They can still unintentionally leak raw pointers or acquire sleeping locks in atomic contexts.

Switch to the regular pointer formatting which is safer and easier to reason about.

Signed-off-by: Thomas Weißschuh thomas.weissschuh@linutronix.de Link: https://lore.kernel.org/r/20250811-restricted-pointers-soc-v2-1-7af7ed993546... Signed-off-by: Nishanth Menon nm@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/ti/pruss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c index 3ec758f50e248..f588153e8178d 100644 --- a/drivers/soc/ti/pruss.c +++ b/drivers/soc/ti/pruss.c @@ -449,7 +449,7 @@ static int pruss_of_setup_memories(struct device *dev, struct pruss *pruss) pruss->mem_regions[i].pa = res.start; pruss->mem_regions[i].size = resource_size(&res);

- dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %pK\n", + dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %p\n", mem_names[i], &pruss->mem_regions[i].pa, pruss->mem_regions[i].size, pruss->mem_regions[i].va); }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chi Zhang chizhang@asrmicro.com

[ Upstream commit 236152dd9b1675a35eee912e79e6c57ca6b6732f ]

In the pin_config_set function, when handling PIN_CONFIG_BIAS_PULL_DOWN or PIN_CONFIG_BIAS_PULL_UP, the function calls pcs_pinconf_clear_bias() which writes the register. However, the subsequent operations continue using the stale 'data' value from before the register write, effectively causing the bias clear operation to be overwritten and not take effect.

Fix this by reading the 'data' value from the register after calling pcs_pinconf_clear_bias().

This bug seems to have existed when this code was first merged in commit 9dddb4df90d1 ("pinctrl: single: support generic pinconf").

Signed-off-by: Chi Zhang chizhang@asrmicro.com Link: https://lore.kernel.org/20250807062038.13610-1-chizhang@asrmicro.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-single.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index 2ec599e383e4b..1df0a00ae1ee8 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -589,8 +589,10 @@ static int pcs_pinconf_set(struct pinctrl_dev *pctldev, /* 4 parameters */ case PIN_CONFIG_BIAS_PULL_DOWN: case PIN_CONFIG_BIAS_PULL_UP: - if (arg) + if (arg) { pcs_pinconf_clear_bias(pctldev, pin); + data = pcs->read(pcs->base + offset); + } fallthrough; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: data &= ~func->conf[i].mask;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiayi Li lijiayi@kylinos.cn

[ Upstream commit b65e630a55a490a0269ab1e4a282af975848064c ]

Add timeout handling to wait_for_completion calls in memstick_set_rw_addr() and memstick_alloc_card() to prevent indefinite blocking in case of hardware or communication failures.

Signed-off-by: Jiayi Li lijiayi@kylinos.cn Link: https://lore.kernel.org/r/20250804024825.1565078-1-lijiayi@kylinos.cn Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/memstick/core/memstick.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c index 2fcc40aa96340..b9459c53c3ed3 100644 --- a/drivers/memstick/core/memstick.c +++ b/drivers/memstick/core/memstick.c @@ -366,7 +366,9 @@ int memstick_set_rw_addr(struct memstick_dev *card) { card->next_request = h_memstick_set_rw_addr; memstick_new_req(card->host); - wait_for_completion(&card->mrq_complete); + if (!wait_for_completion_timeout(&card->mrq_complete, + msecs_to_jiffies(500))) + card->current_mrq.error = -ETIMEDOUT;

return card->current_mrq.error; } @@ -400,7 +402,9 @@ static struct memstick_dev *memstick_alloc_card(struct memstick_host *host)

card->next_request = h_memstick_read_dev_id; memstick_new_req(host); - wait_for_completion(&card->mrq_complete); + if (!wait_for_completion_timeout(&card->mrq_complete, + msecs_to_jiffies(500))) + card->current_mrq.error = -ETIMEDOUT;

if (card->current_mrq.error) goto err_out;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paul Chaignon paul.chaignon@gmail.com

[ Upstream commit f41345f47fb267a9c95ca710c33448f8d0d81d83 ]

In the following toy program (reg states minimized for readability), R0 and R1 always have different values at instruction 6. This is obvious when reading the program but cannot be guessed from ranges alone as they overlap (R0 in [0; 0xc0000000], R1 in [1024; 0xc0000400]).

0: call bpf_get_prandom_u32#7 ; R0_w=scalar() 1: w0 = w0 ; R0_w=scalar(var_off=(0x0; 0xffffffff)) 2: r0 >>= 30 ; R0_w=scalar(var_off=(0x0; 0x3)) 3: r0 <<= 30 ; R0_w=scalar(var_off=(0x0; 0xc0000000)) 4: r1 = r0 ; R1_w=scalar(var_off=(0x0; 0xc0000000)) 5: r1 += 1024 ; R1_w=scalar(var_off=(0x400; 0xc0000000)) 6: if r1 != r0 goto pc+1

Looking at tnums however, we can deduce that R1 is always different from R0 because their tnums don't agree on known bits. This patch uses this logic to improve is_scalar_branch_taken in case of BPF_JEQ and BPF_JNE.

This change has a tiny impact on complexity, which was measured with the Cilium complexity CI test. That test covers 72 programs with various build and load time configurations for a total of 970 test cases. For 80% of test cases, the patch has no impact. On the other test cases, the patch decreases complexity by only 0.08% on average. In the best case, the verifier needs to walk 3% less instructions and, in the worst case, 1.5% more. Overall, the patch has a small positive impact, especially for our largest programs.

Signed-off-by: Paul Chaignon paul.chaignon@gmail.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Eduard Zingerman eddyz87@gmail.com Acked-by: Shung-Hsi Yu shung-hsi.yu@suse.com Acked-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/bpf/be3ee70b6e489c49881cb1646114b1d861b5c334.1755694... Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/tnum.h | 3 +++ kernel/bpf/tnum.c | 8 ++++++++ kernel/bpf/verifier.c | 4 ++++ 3 files changed, 15 insertions(+)

diff --git a/include/linux/tnum.h b/include/linux/tnum.h index 3c13240077b87..191baf3a8d832 100644 --- a/include/linux/tnum.h +++ b/include/linux/tnum.h @@ -49,6 +49,9 @@ struct tnum tnum_xor(struct tnum a, struct tnum b); /* Multiply two tnums, return @a * @b */ struct tnum tnum_mul(struct tnum a, struct tnum b);

+/* Return true if the known bits of both tnums have the same value */ +bool tnum_overlap(struct tnum a, struct tnum b); + /* Return a tnum representing numbers satisfying both @a and @b */ struct tnum tnum_intersect(struct tnum a, struct tnum b);

diff --git a/kernel/bpf/tnum.c b/kernel/bpf/tnum.c index 9dbc31b25e3d0..8e6d0ac713731 100644 --- a/kernel/bpf/tnum.c +++ b/kernel/bpf/tnum.c @@ -138,6 +138,14 @@ struct tnum tnum_mul(struct tnum a, struct tnum b) return tnum_add(TNUM(acc_v, 0), acc_m); }

+bool tnum_overlap(struct tnum a, struct tnum b) +{ + u64 mu; + + mu = ~a.mask & ~b.mask; + return (a.value & mu) == (b.value & mu); +} + /* Note that if a and b disagree - i.e. one has a 'known 1' where the other has * a 'known 0' - this will return a 'known 1' for that bit. */ diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 709151d33e5e4..218c238d61398 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -14772,6 +14772,8 @@ static int is_scalar_branch_taken(struct bpf_reg_state *reg1, struct bpf_reg_sta */ if (tnum_is_const(t1) && tnum_is_const(t2)) return t1.value == t2.value; + if (!tnum_overlap(t1, t2)) + return 0; /* non-overlapping ranges */ if (umin1 > umax2 || umax1 < umin2) return 0; @@ -14796,6 +14798,8 @@ static int is_scalar_branch_taken(struct bpf_reg_state *reg1, struct bpf_reg_sta */ if (tnum_is_const(t1) && tnum_is_const(t2)) return t1.value != t2.value; + if (!tnum_overlap(t1, t2)) + return 1; /* non-overlapping ranges */ if (umin1 > umax2 || umax1 < umin2) return 1;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Inochi Amaoto inochiama@gmail.com

[ Upstream commit adecf78df945f4c7a1d29111b0002827f487df51 ]

plic_set_affinity() always calls plic_irq_enable(), which clears up the priority setting even the interrupt is only masked. This unmasks the interrupt unexpectly.

Replace the plic_irq_enable/disable() with plic_irq_toggle() to avoid changing the priority setting.

Suggested-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Inochi Amaoto inochiama@gmail.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Nam Cao namcao@linutronix.de # VisionFive 2 Tested-by: Chen Wang unicorn_wang@outlook.com # Pioneerbox Reviewed-by: Nam Cao namcao@linutronix.de Reviewed-by: Chen Wang unicorn_wang@outlook.com Link: https://lore.kernel.org/all/20250811002633.55275-1-inochiama@gmail.com Link: https://lore.kernel.org/lkml/20250722224513.22125-1-inochiama@gmail.com/ Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-sifive-plic.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c index 9c4af7d588463..c0cf4fed13e09 100644 --- a/drivers/irqchip/irq-sifive-plic.c +++ b/drivers/irqchip/irq-sifive-plic.c @@ -179,12 +179,14 @@ static int plic_set_affinity(struct irq_data *d, if (cpu >= nr_cpu_ids) return -EINVAL;

- plic_irq_disable(d); + /* Invalidate the original routing entry */ + plic_irq_toggle(irq_data_get_effective_affinity_mask(d), d, 0);

irq_data_update_effective_affinity(d, cpumask_of(cpu));

+ /* Setting the new routing entry if irq is enabled */ if (!irqd_irq_disabled(d)) - plic_irq_enable(d); + plic_irq_toggle(irq_data_get_effective_affinity_mask(d), d, 1);

return IRQ_SET_MASK_OK_DONE; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kaushlendra Kumar kaushlendra.kumar@intel.com

[ Upstream commit 149139ddcb99583fdec8d1eaf7dada41e5896101 ]

Since str_obj is allocated by ACPICA in acpi_evaluate_object_typed(), it should be free with ACPI_FREE() rather than with kfree(), so use the former instead of the latter for freeing it.

Signed-off-by: Kaushlendra Kumar kaushlendra.kumar@intel.com Link: https://patch.msgid.link/20250822061946.472594-1-kaushlendra.kumar@intel.com [ rjw: Subject and changelog rewrite ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/device_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/device_sysfs.c b/drivers/acpi/device_sysfs.c index 3961fc47152c0..cd199fbe4dc90 100644 --- a/drivers/acpi/device_sysfs.c +++ b/drivers/acpi/device_sysfs.c @@ -464,7 +464,7 @@ static ssize_t description_show(struct device *dev,

buf[result++] = '\n';

- kfree(str_obj); + ACPI_FREE(str_obj);

return result; }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiawei Zhao phoenix500526@163.com

[ Upstream commit 758acb9ccfdbf854b55abaceaf1f3f229cde3d19 ]

On x86-64, USDT arguments can be specified using Scale-Index-Base (SIB) addressing, e.g. "1@-96(%rbp,%rax,8)". The current USDT implementation in libbpf cannot parse this format, causing `bpf_program__attach_usdt()` to fail with -ENOENT (unrecognized register).

This patch fixes this by implementing the necessary changes: - add correct handling for SIB-addressed arguments in `bpf_usdt_arg`. - add adaptive support to `__bpf_usdt_arg_type` and `__bpf_usdt_arg_spec` to represent SIB addressing parameters.

Signed-off-by: Jiawei Zhao phoenix500526@163.com Signed-off-by: Andrii Nakryiko andrii@kernel.org Link: https://lore.kernel.org/bpf/20250827053128.1301287-2-phoenix500526@163.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/lib/bpf/usdt.bpf.h | 44 ++++++++++++++++++++++++++-- tools/lib/bpf/usdt.c | 62 ++++++++++++++++++++++++++++++++++++---- 2 files changed, 99 insertions(+), 7 deletions(-)

diff --git a/tools/lib/bpf/usdt.bpf.h b/tools/lib/bpf/usdt.bpf.h index b811f754939f0..3e59a7704534b 100644 --- a/tools/lib/bpf/usdt.bpf.h +++ b/tools/lib/bpf/usdt.bpf.h @@ -34,13 +34,32 @@ enum __bpf_usdt_arg_type { BPF_USDT_ARG_CONST, BPF_USDT_ARG_REG, BPF_USDT_ARG_REG_DEREF, + BPF_USDT_ARG_SIB, };

+/* + * This struct layout is designed specifically to be backwards/forward + * compatible between libbpf versions for ARG_CONST, ARG_REG, and + * ARG_REG_DEREF modes. ARG_SIB requires libbpf v1.7+. + */ struct __bpf_usdt_arg_spec { /* u64 scalar interpreted depending on arg_type, see below */ __u64 val_off; +#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ /* arg location case, see bpf_usdt_arg() for details */ - enum __bpf_usdt_arg_type arg_type; + enum __bpf_usdt_arg_type arg_type: 8; + /* index register offset within struct pt_regs */ + __u16 idx_reg_off: 12; + /* scale factor for index register (1, 2, 4, or 8) */ + __u16 scale_bitshift: 4; + /* reserved for future use, keeps reg_off offset stable */ + __u8 __reserved: 8; +#else + __u8 __reserved: 8; + __u16 idx_reg_off: 12; + __u16 scale_bitshift: 4; + enum __bpf_usdt_arg_type arg_type: 8; +#endif /* offset of referenced register within struct pt_regs */ short reg_off; /* whether arg should be interpreted as signed value */ @@ -117,7 +136,7 @@ int bpf_usdt_arg(struct pt_regs *ctx, __u64 arg_num, long *res) { struct __bpf_usdt_spec *spec; struct __bpf_usdt_arg_spec *arg_spec; - unsigned long val; + unsigned long val, idx; int err, spec_id;

*res = 0; @@ -170,6 +189,27 @@ int bpf_usdt_arg(struct pt_regs *ctx, __u64 arg_num, long *res) return err; #if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ val >>= arg_spec->arg_bitshift; +#endif + break; + case BPF_USDT_ARG_SIB: + /* Arg is in memory addressed by SIB (Scale-Index-Base) mode + * (e.g., "-1@-96(%rbp,%rax,8)" in USDT arg spec). We first + * fetch the base register contents and the index register + * contents from pt_regs. Then we calculate the final address + * as base + (index * scale) + offset, and do a user-space + * probe read to fetch the argument value. + */ + err = bpf_probe_read_kernel(&val, sizeof(val), (void *)ctx + arg_spec->reg_off); + if (err) + return err; + err = bpf_probe_read_kernel(&idx, sizeof(idx), (void *)ctx + arg_spec->idx_reg_off); + if (err) + return err; + err = bpf_probe_read_user(&val, sizeof(val), (void *)(val + (idx << arg_spec->scale_bitshift) + arg_spec->val_off)); + if (err) + return err; +#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ + val >>= arg_spec->arg_bitshift; #endif break; default: diff --git a/tools/lib/bpf/usdt.c b/tools/lib/bpf/usdt.c index 6ff28e7bf5e3d..76e7c5bf0cb2d 100644 --- a/tools/lib/bpf/usdt.c +++ b/tools/lib/bpf/usdt.c @@ -199,12 +199,23 @@ enum usdt_arg_type { USDT_ARG_CONST, USDT_ARG_REG, USDT_ARG_REG_DEREF, + USDT_ARG_SIB, };

/* should match exactly struct __bpf_usdt_arg_spec from usdt.bpf.h */ struct usdt_arg_spec { __u64 val_off; - enum usdt_arg_type arg_type; +#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ + enum usdt_arg_type arg_type: 8; + __u16 idx_reg_off: 12; + __u16 scale_bitshift: 4; + __u8 __reserved: 8; /* keep reg_off offset stable */ +#else + __u8 __reserved: 8; /* keep reg_off offset stable */ + __u16 idx_reg_off: 12; + __u16 scale_bitshift: 4; + enum usdt_arg_type arg_type: 8; +#endif short reg_off; bool arg_signed; char arg_bitshift; @@ -1281,11 +1292,51 @@ static int calc_pt_regs_off(const char *reg_name)

static int parse_usdt_arg(const char *arg_str, int arg_num, struct usdt_arg_spec *arg, int *arg_sz) { - char reg_name[16]; - int len, reg_off; - long off; + char reg_name[16] = {0}, idx_reg_name[16] = {0}; + int len, reg_off, idx_reg_off, scale = 1; + long off = 0; + + if (sscanf(arg_str, " %d @ %ld ( %%%15[^,] , %%%15[^,] , %d ) %n", + arg_sz, &off, reg_name, idx_reg_name, &scale, &len) == 5 || + sscanf(arg_str, " %d @ ( %%%15[^,] , %%%15[^,] , %d ) %n", + arg_sz, reg_name, idx_reg_name, &scale, &len) == 4 || + sscanf(arg_str, " %d @ %ld ( %%%15[^,] , %%%15[^)] ) %n", + arg_sz, &off, reg_name, idx_reg_name, &len) == 4 || + sscanf(arg_str, " %d @ ( %%%15[^,] , %%%15[^)] ) %n", + arg_sz, reg_name, idx_reg_name, &len) == 3 + ) { + /* + * Scale Index Base case: + * 1@-96(%rbp,%rax,8) + * 1@(%rbp,%rax,8) + * 1@-96(%rbp,%rax) + * 1@(%rbp,%rax) + */ + arg->arg_type = USDT_ARG_SIB; + arg->val_off = off;

- if (sscanf(arg_str, " %d @ %ld ( %%%15[^)] ) %n", arg_sz, &off, reg_name, &len) == 3) { + reg_off = calc_pt_regs_off(reg_name); + if (reg_off < 0) + return reg_off; + arg->reg_off = reg_off; + + idx_reg_off = calc_pt_regs_off(idx_reg_name); + if (idx_reg_off < 0) + return idx_reg_off; + arg->idx_reg_off = idx_reg_off; + + /* validate scale factor and set fields directly */ + switch (scale) { + case 1: arg->scale_bitshift = 0; break; + case 2: arg->scale_bitshift = 1; break; + case 4: arg->scale_bitshift = 2; break; + case 8: arg->scale_bitshift = 3; break; + default: + pr_warn("usdt: invalid SIB scale %d, expected 1, 2, 4, 8\n", scale); + return -EINVAL; + } + } else if (sscanf(arg_str, " %d @ %ld ( %%%15[^)] ) %n", + arg_sz, &off, reg_name, &len) == 3) { /* Memory dereference case, e.g., -4@-20(%rbp) */ arg->arg_type = USDT_ARG_REG_DEREF; arg->val_off = off; @@ -1304,6 +1355,7 @@ static int parse_usdt_arg(const char *arg_str, int arg_num, struct usdt_arg_spec } else if (sscanf(arg_str, " %d @ %%%15s %n", arg_sz, reg_name, &len) == 2) { /* Register read case, e.g., -4@%eax */ arg->arg_type = USDT_ARG_REG; + /* register read has no memory offset */ arg->val_off = 0;

reg_off = calc_pt_regs_off(reg_name);

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dennis Beier nanovim@gmail.com

[ Upstream commit 592532a77b736b5153e0c2e4c74aa50af0a352ab ]

longhaul_exit() was calling cpufreq_cpu_get(0) without checking for a NULL policy pointer. On some systems, this could lead to a NULL dereference and a kernel warning or panic.

This patch adds a check using unlikely() and returns early if the policy is NULL.

Bugzilla: #219962

Signed-off-by: Dennis Beier nanovim@gmail.com Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cpufreq/longhaul.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index bd6fe8638d399..02767c1f9edef 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -954,6 +954,9 @@ static void __exit longhaul_exit(void) struct cpufreq_policy *policy = cpufreq_cpu_get(0); int i;

+ if (unlikely(!policy)) + return; + for (i = 0; i < numscales; i++) { if (mults[i] == maxmult) { struct cpufreq_freqs freqs;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yuan Chen chenyuan@kylinos.cn

[ Upstream commit 6417ca85305ecaffef13cf9063ac35da8fba8500 ]

Adjust symbol matching logic to account for Control-flow Enforcement Technology (CET) on x86_64 systems. CET prefixes functions with a 4-byte 'endbr' instruction, shifting the actual hook entry point to symbol + 4.

Signed-off-by: Yuan Chen chenyuan@kylinos.cn Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Quentin Monnet qmo@kernel.org Acked-by: Yonghong Song yonghong.song@linux.dev Acked-by: Jiri Olsa jolsa@kernel.org Link: https://lore.kernel.org/bpf/20250829061107.23905-3-chenyuan_fl@163.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/bpf/bpftool/link.c | 54 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 50 insertions(+), 4 deletions(-)

diff --git a/tools/bpf/bpftool/link.c b/tools/bpf/bpftool/link.c index 5cd503b763d72..9ce15febc6f25 100644 --- a/tools/bpf/bpftool/link.c +++ b/tools/bpf/bpftool/link.c @@ -282,11 +282,52 @@ get_addr_cookie_array(__u64 *addrs, __u64 *cookies, __u32 count) return data; }

+static bool is_x86_ibt_enabled(void) +{ +#if defined(__x86_64__) + struct kernel_config_option options[] = { + { "CONFIG_X86_KERNEL_IBT", }, + }; + char *values[ARRAY_SIZE(options)] = { }; + bool ret; + + if (read_kernel_config(options, ARRAY_SIZE(options), values, NULL)) + return false; + + ret = !!values[0]; + free(values[0]); + return ret; +#else + return false; +#endif +} + +static bool +symbol_matches_target(__u64 sym_addr, __u64 target_addr, bool is_ibt_enabled) +{ + if (sym_addr == target_addr) + return true; + + /* + * On x86_64 architectures with CET (Control-flow Enforcement Technology), + * function entry points have a 4-byte 'endbr' instruction prefix. + * This causes kprobe hooks to target the address *after* 'endbr' + * (symbol address + 4), preserving the CET instruction. + * Here we check if the symbol address matches the hook target address + * minus 4, indicating a CET-enabled function entry point. + */ + if (is_ibt_enabled && sym_addr == target_addr - 4) + return true; + + return false; +} + static void show_kprobe_multi_json(struct bpf_link_info *info, json_writer_t *wtr) { struct addr_cookie *data; __u32 i, j = 0; + bool is_ibt_enabled;

jsonw_bool_field(json_wtr, "retprobe", info->kprobe_multi.flags & BPF_F_KPROBE_MULTI_RETURN); @@ -306,11 +347,13 @@ show_kprobe_multi_json(struct bpf_link_info *info, json_writer_t *wtr) if (!dd.sym_count) goto error;

+ is_ibt_enabled = is_x86_ibt_enabled(); for (i = 0; i < dd.sym_count; i++) { - if (dd.sym_mapping[i].address != data[j].addr) + if (!symbol_matches_target(dd.sym_mapping[i].address, + data[j].addr, is_ibt_enabled)) continue; jsonw_start_object(json_wtr); - jsonw_uint_field(json_wtr, "addr", dd.sym_mapping[i].address); + jsonw_uint_field(json_wtr, "addr", (unsigned long)data[j].addr); jsonw_string_field(json_wtr, "func", dd.sym_mapping[i].name); /* Print null if it is vmlinux */ if (dd.sym_mapping[i].module[0] == '\0') { @@ -716,6 +759,7 @@ static void show_kprobe_multi_plain(struct bpf_link_info *info) { struct addr_cookie *data; __u32 i, j = 0; + bool is_ibt_enabled;

if (!info->kprobe_multi.count) return; @@ -739,12 +783,14 @@ static void show_kprobe_multi_plain(struct bpf_link_info *info) if (!dd.sym_count) goto error;

+ is_ibt_enabled = is_x86_ibt_enabled(); printf("\n\t%-16s %-16s %s", "addr", "cookie", "func [module]"); for (i = 0; i < dd.sym_count; i++) { - if (dd.sym_mapping[i].address != data[j].addr) + if (!symbol_matches_target(dd.sym_mapping[i].address, + data[j].addr, is_ibt_enabled)) continue; printf("\n\t%016lx %-16llx %s", - dd.sym_mapping[i].address, data[j].cookie, dd.sym_mapping[i].name); + (unsigned long)data[j].addr, data[j].cookie, dd.sym_mapping[i].name); if (dd.sym_mapping[i].module[0] != '\0') printf(" [%s] ", dd.sym_mapping[i].module); else

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christian Bruel christian.bruel@foss.st.com

[ Upstream commit 2ef3886ce626dcdab0cbc452dbbebc19f57133d8 ]

The PCI Local Bus Specification 3.0 (section 6.8.1.6) allows modifying the low-order bits of the MSI Message DATA register to encode nr_irqs interrupt numbers in the log2(nr_irqs) bits for the domain.

The problem arises if the base vector (GICV2m base spi) is not aligned with nr_irqs; in this case, the low-order log2(nr_irqs) bits from the base vector conflict with the nr_irqs masking, causing the wrong MSI interrupt to be identified.

To fix this, use bitmap_find_next_zero_area_off() instead of bitmap_find_free_region() to align the initial base vector with nr_irqs.

Signed-off-by: Christian Bruel christian.bruel@foss.st.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Reviewed-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/all/20250902091045.220847-1-christian.bruel@foss.st.... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-gic-v2m.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c index a1e370d0200f1..b5479c552b776 100644 --- a/drivers/irqchip/irq-gic-v2m.c +++ b/drivers/irqchip/irq-gic-v2m.c @@ -156,14 +156,19 @@ static int gicv2m_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, { msi_alloc_info_t *info = args; struct v2m_data *v2m = NULL, *tmp; - int hwirq, offset, i, err = 0; + int hwirq, i, err = 0; + unsigned long offset; + unsigned long align_mask = nr_irqs - 1;

spin_lock(&v2m_lock); list_for_each_entry(tmp, &v2m_nodes, entry) { - offset = bitmap_find_free_region(tmp->bm, tmp->nr_spis, - get_count_order(nr_irqs)); - if (offset >= 0) { + unsigned long align_off = tmp->spi_start - (tmp->spi_start & ~align_mask); + + offset = bitmap_find_next_zero_area_off(tmp->bm, tmp->nr_spis, 0, + nr_irqs, align_mask, align_off); + if (offset < tmp->nr_spis) { v2m = tmp; + bitmap_set(v2m->bm, offset, nr_irqs); break; } }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sam van Kampen sam@tehsvk.net

[ Upstream commit 3a351de0d9c86e23b9eca25838b19468aab02f38 ]

Just like the other Vivobooks here, the N6506CU has its keyboard IRQ described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh, causing the internal keyboard not to work.

Add the N6506CU to the irq1_level_low_skip_override[] quirk table to fix this.

Signed-off-by: Sam van Kampen sam@tehsvk.net Link: https://patch.msgid.link/20250829145221.2294784-2-sam@tehsvk.net Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/resource.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index 7d59c6c9185fc..4937032490689 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -510,6 +510,13 @@ static const struct dmi_system_id irq1_level_low_skip_override[] = { DMI_MATCH(DMI_BOARD_NAME, "N6506M"), }, }, + { + /* Asus Vivobook Pro N6506CU* */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_BOARD_NAME, "N6506CU"), + }, + }, { /* LG Electronics 17U70P */ .matches = {

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafael J. Wysocki rafael.j.wysocki@intel.com

[ Upstream commit 2e82368359f63567862a0d438710ddffcb1ace83 ]

The current behavior of the Step-wise thermal governor is to increase the cooling level one step at a time after trip point threshold passing by thermal zone temperature until the temperature stops to rise. Then, nothing is done until the temperature decreases below the (possibly updated) trip point threshold, at which point the cooling level is reduced straight to the applicable minimum.

While this generally works, it is not in agreement with the throttling logic description comment in step_wise_manage() any more after some relatively recent changes, and in the case of passive cooling, it may lead to undesirable performance oscillations between high and low levels.

For this reason, modify the governor's cooling device state selection function, get_target_state(), to reduce cooling by one level even if the temperature is still above the thermal zone threshold, but the temperature has started to fall down. However, ensure that the cooling level will remain above the applicable minimum in that case to pull the zone temperature further down, possibly until it falls below the trip threshold (which may now be equal to the low temperature of the trip).

Doing so should help higher performance to be restored earlier in some cases which is desirable especially for passive trip points with relatively high hysteresis values.

Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Reviewed-by: Lukasz Luba lukasz.luba@arm.com Link: https://patch.msgid.link/1947735.tdWV9SEqCh@rafael.j.wysocki [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/gov_step_wise.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c index ea4bf88d37f33..b038f042ed74e 100644 --- a/drivers/thermal/gov_step_wise.c +++ b/drivers/thermal/gov_step_wise.c @@ -20,7 +20,9 @@ * If the temperature is higher than a trip point, * a. if the trend is THERMAL_TREND_RAISING, use higher cooling * state for this trip point - * b. if the trend is THERMAL_TREND_DROPPING, do nothing + * b. if the trend is THERMAL_TREND_DROPPING, use a lower cooling state + * for this trip point, but keep the cooling state above the applicable + * minimum * If the temperature is lower than a trip point, * a. if the trend is THERMAL_TREND_RAISING, do nothing * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling @@ -51,6 +53,17 @@ static unsigned long get_target_state(struct thermal_instance *instance, if (throttle) { if (trend == THERMAL_TREND_RAISING) return clamp(cur_state + 1, instance->lower, instance->upper); + + /* + * If the zone temperature is falling, the cooling level can + * be reduced, but it should still be above the lower state of + * the given thermal instance to pull the temperature further + * down. + */ + if (trend == THERMAL_TREND_DROPPING) + return clamp(cur_state - 1, + min(instance->lower + 1, instance->upper), + instance->upper); } else if (trend == THERMAL_TREND_DROPPING) { if (cur_state <= instance->lower) return THERMAL_NO_TARGET;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christopher Ruehl chris.ruehl@gtsys.com.hk

[ Upstream commit fee0904441325d83e7578ca457ec65a9d3f21264 ]

The ASUS S15 xElite model report the Li-ion battery with an OOI, hence this update the detection and return the appropriate type.

Signed-off-by: Christopher Ruehl chris.ruehl@gtsys.com.hk Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@oss.qualcomm.com Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/supply/qcom_battmgr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/qcom_battmgr.c b/drivers/power/supply/qcom_battmgr.c index c2037b58fbcdf..dd89104cb1672 100644 --- a/drivers/power/supply/qcom_battmgr.c +++ b/drivers/power/supply/qcom_battmgr.c @@ -978,7 +978,8 @@ static void qcom_battmgr_sc8280xp_strcpy(char *dest, const char *src)

static unsigned int qcom_battmgr_sc8280xp_parse_technology(const char *chemistry) { - if (!strncmp(chemistry, "LIO", BATTMGR_CHEMISTRY_LEN)) + if ((!strncmp(chemistry, "LIO", BATTMGR_CHEMISTRY_LEN)) || + (!strncmp(chemistry, "OOI", BATTMGR_CHEMISTRY_LEN))) return POWER_SUPPLY_TECHNOLOGY_LION; if (!strncmp(chemistry, "LIP", BATTMGR_CHEMISTRY_LEN)) return POWER_SUPPLY_TECHNOLOGY_LIPO;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rong Zhang i@rong.moe

[ Upstream commit e5d1e313d7b6272d6dfda983906d99f97ad9062b ]

The device ID of Strix Halo Data Fabric Function 3 has been in the tree since commit 0e640f0a47d8 ("x86/amd_nb: Add new PCI IDs for AMD family 0x1a"), but is somehow missing from k10temp_id_table.

Add it so that it works out of the box.

Tested on Beelink GTR9 Pro Mini PC.

Signed-off-by: Rong Zhang i@rong.moe Reviewed-by: Mario Limonciello mario.limonciello@amd.com Link: https://lore.kernel.org/r/20250823180443.85512-1-i@rong.moe Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/k10temp.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index c457ba4706197..ccf0e9e853acd 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -551,6 +551,7 @@ static const struct pci_device_id k10temp_id_table[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_1AH_M20H_DF_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_1AH_M50H_DF_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_1AH_M60H_DF_F3) }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_1AH_M70H_DF_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_1AH_M90H_DF_F3) }, { PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) }, {}

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chuande Chen chuachen@cisco.com

[ Upstream commit d9d61f1da35038793156c04bb13f0a1350709121 ]

Many AMD CPUs can support this feature now. We would get a wrong CPU DIE temperature if don't consider this. In low-temperature environments, the CPU die temperature can drop below zero. So many platforms would like to make extended temperature range as their default configuration. Default temperature range (0C to 255.875C). Extended temperature range (-49C to +206.875C). Ref Doc: AMD V3000 PPR (Doc ID #56558).

Signed-off-by: Chuande Chen chuachen@cisco.com Link: https://lore.kernel.org/r/20250814053940.96764-1-chenchuande@gmail.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/sbtsi_temp.c | 46 +++++++++++++++++++++++++------------- 1 file changed, 31 insertions(+), 15 deletions(-)

diff --git a/drivers/hwmon/sbtsi_temp.c b/drivers/hwmon/sbtsi_temp.c index 3c839f56c4603..a6c439e376ff7 100644 --- a/drivers/hwmon/sbtsi_temp.c +++ b/drivers/hwmon/sbtsi_temp.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> +#include <linux/bitfield.h>

/* * SB-TSI registers only support SMBus byte data access. "_INT" registers are @@ -29,8 +30,22 @@ #define SBTSI_REG_TEMP_HIGH_DEC 0x13 /* RW */ #define SBTSI_REG_TEMP_LOW_DEC 0x14 /* RW */

+/* + * Bit for reporting value with temperature measurement range. + * bit == 0: Use default temperature range (0C to 255.875C). + * bit == 1: Use extended temperature range (-49C to +206.875C). + */ +#define SBTSI_CONFIG_EXT_RANGE_SHIFT 2 +/* + * ReadOrder bit specifies the reading order of integer and decimal part of + * CPU temperature for atomic reads. If bit == 0, reading integer part triggers + * latching of the decimal part, so integer part should be read first. + * If bit == 1, read order should be reversed. + */ #define SBTSI_CONFIG_READ_ORDER_SHIFT 5

+#define SBTSI_TEMP_EXT_RANGE_ADJ 49000 + #define SBTSI_TEMP_MIN 0 #define SBTSI_TEMP_MAX 255875

@@ -38,6 +53,8 @@ struct sbtsi_data { struct i2c_client *client; struct mutex lock; + bool ext_range_mode; + bool read_order; };

/* @@ -74,23 +91,11 @@ static int sbtsi_read(struct device *dev, enum hwmon_sensor_types type, { struct sbtsi_data *data = dev_get_drvdata(dev); s32 temp_int, temp_dec; - int err;

switch (attr) { case hwmon_temp_input: - /* - * ReadOrder bit specifies the reading order of integer and - * decimal part of CPU temp for atomic reads. If bit == 0, - * reading integer part triggers latching of the decimal part, - * so integer part should be read first. If bit == 1, read - * order should be reversed. - */ - err = i2c_smbus_read_byte_data(data->client, SBTSI_REG_CONFIG); - if (err < 0) - return err; - mutex_lock(&data->lock); - if (err & BIT(SBTSI_CONFIG_READ_ORDER_SHIFT)) { + if (data->read_order) { temp_dec = i2c_smbus_read_byte_data(data->client, SBTSI_REG_TEMP_DEC); temp_int = i2c_smbus_read_byte_data(data->client, SBTSI_REG_TEMP_INT); } else { @@ -122,6 +127,8 @@ static int sbtsi_read(struct device *dev, enum hwmon_sensor_types type, return temp_dec;

*val = sbtsi_reg_to_mc(temp_int, temp_dec); + if (data->ext_range_mode) + *val -= SBTSI_TEMP_EXT_RANGE_ADJ;

return 0; } @@ -146,6 +153,8 @@ static int sbtsi_write(struct device *dev, enum hwmon_sensor_types type, return -EINVAL; }

+ if (data->ext_range_mode) + val += SBTSI_TEMP_EXT_RANGE_ADJ; val = clamp_val(val, SBTSI_TEMP_MIN, SBTSI_TEMP_MAX); sbtsi_mc_to_reg(val, &temp_int, &temp_dec);

@@ -203,6 +212,7 @@ static int sbtsi_probe(struct i2c_client *client) struct device *dev = &client->dev; struct device *hwmon_dev; struct sbtsi_data *data; + int err;

data = devm_kzalloc(dev, sizeof(struct sbtsi_data), GFP_KERNEL); if (!data) @@ -211,8 +221,14 @@ static int sbtsi_probe(struct i2c_client *client) data->client = client; mutex_init(&data->lock);

- hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, &sbtsi_chip_info, - NULL); + err = i2c_smbus_read_byte_data(data->client, SBTSI_REG_CONFIG); + if (err < 0) + return err; + data->ext_range_mode = FIELD_GET(BIT(SBTSI_CONFIG_EXT_RANGE_SHIFT), err); + data->read_order = FIELD_GET(BIT(SBTSI_CONFIG_READ_ORDER_SHIFT), err); + + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, + &sbtsi_chip_info, NULL);

return PTR_ERR_OR_ZERO(hwmon_dev); }

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fabien Proriol fabien.proriol@viavisolutions.com

[ Upstream commit 3ec600210849cf122606e24caab85f0b936cf63c ]

If we have 2 instances of sbs-charger in the DTS, the driver probe for the second instance will fail:

[ 8.012874] sbs-battery 18-000b: sbs-battery: battery gas gauge device registered [ 8.039094] sbs-charger 18-0009: ltc4100: smart charger device registered [ 8.112911] sbs-battery 20-000b: sbs-battery: battery gas gauge device registered [ 8.134533] sysfs: cannot create duplicate filename '/class/power_supply/sbs-charger' [ 8.143871] CPU: 3 PID: 295 Comm: systemd-udevd Tainted: G O 5.10.147 #22 [ 8.151974] Hardware name: ALE AMB (DT) [ 8.155828] Call trace: [ 8.158292] dump_backtrace+0x0/0x1d4 [ 8.161960] show_stack+0x18/0x6c [ 8.165280] dump_stack+0xcc/0x128 [ 8.168687] sysfs_warn_dup+0x60/0x7c [ 8.172353] sysfs_do_create_link_sd+0xf0/0x100 [ 8.176886] sysfs_create_link+0x20/0x40 [ 8.180816] device_add+0x270/0x7a4 [ 8.184311] __power_supply_register+0x304/0x560 [ 8.188930] devm_power_supply_register+0x54/0xa0 [ 8.193644] sbs_probe+0xc0/0x214 [sbs_charger] [ 8.198183] i2c_device_probe+0x2dc/0x2f4 [ 8.202196] really_probe+0xf0/0x510 [ 8.205774] driver_probe_device+0xfc/0x160 [ 8.209960] device_driver_attach+0xc0/0xcc [ 8.214146] __driver_attach+0xc0/0x170 [ 8.218002] bus_for_each_dev+0x74/0xd4 [ 8.221862] driver_attach+0x24/0x30 [ 8.225444] bus_add_driver+0x148/0x250 [ 8.229283] driver_register+0x78/0x130 [ 8.233140] i2c_register_driver+0x4c/0xe0 [ 8.237250] sbs_driver_init+0x20/0x1000 [sbs_charger] [ 8.242424] do_one_initcall+0x50/0x1b0 [ 8.242434] do_init_module+0x44/0x230 [ 8.242438] load_module+0x2200/0x27c0 [ 8.242442] __do_sys_finit_module+0xa8/0x11c [ 8.242447] __arm64_sys_finit_module+0x20/0x30 [ 8.242457] el0_svc_common.constprop.0+0x64/0x154 [ 8.242464] do_el0_svc+0x24/0x8c [ 8.242474] el0_svc+0x10/0x20 [ 8.242481] el0_sync_handler+0x108/0x114 [ 8.242485] el0_sync+0x180/0x1c0 [ 8.243847] sbs-charger 20-0009: Failed to register power supply [ 8.287934] sbs-charger: probe of 20-0009 failed with error -17

This is mainly because the "name" field of power_supply_desc is a constant. This patch fixes the issue by reusing the same approach as sbs-battery. With this patch, the result is: [ 7.819532] sbs-charger 18-0009: ltc4100: smart charger device registered [ 7.825305] sbs-battery 18-000b: sbs-battery: battery gas gauge device registered [ 7.887423] sbs-battery 20-000b: sbs-battery: battery gas gauge device registered [ 7.893501] sbs-charger 20-0009: ltc4100: smart charger device registered

Signed-off-by: Fabien Proriol fabien.proriol@viavisolutions.com Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/supply/sbs-charger.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/power/supply/sbs-charger.c b/drivers/power/supply/sbs-charger.c index ab3f095d90ea7..0ae7264491997 100644 --- a/drivers/power/supply/sbs-charger.c +++ b/drivers/power/supply/sbs-charger.c @@ -154,8 +154,7 @@ static const struct regmap_config sbs_regmap = { .val_format_endian = REGMAP_ENDIAN_LITTLE, /* since based on SMBus */ };

-static const struct power_supply_desc sbs_desc = { - .name = "sbs-charger", +static const struct power_supply_desc sbs_default_desc = { .type = POWER_SUPPLY_TYPE_MAINS, .properties = sbs_properties, .num_properties = ARRAY_SIZE(sbs_properties), @@ -165,9 +164,20 @@ static const struct power_supply_desc sbs_desc = { static int sbs_probe(struct i2c_client *client) { struct power_supply_config psy_cfg = {}; + struct power_supply_desc *sbs_desc; struct sbs_info *chip; int ret, val;

+ sbs_desc = devm_kmemdup(&client->dev, &sbs_default_desc, + sizeof(*sbs_desc), GFP_KERNEL); + if (!sbs_desc) + return -ENOMEM; + + sbs_desc->name = devm_kasprintf(&client->dev, GFP_KERNEL, "sbs-%s", + dev_name(&client->dev)); + if (!sbs_desc->name) + return -ENOMEM; + chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL); if (!chip) return -ENOMEM; @@ -191,7 +201,7 @@ static int sbs_probe(struct i2c_client *client) return dev_err_probe(&client->dev, ret, "Failed to get device status\n"); chip->last_state = val;

- chip->power_supply = devm_power_supply_register(&client->dev, &sbs_desc, &psy_cfg); + chip->power_supply = devm_power_supply_register(&client->dev, sbs_desc, &psy_cfg); if (IS_ERR(chip->power_supply)) return dev_err_probe(&client->dev, PTR_ERR(chip->power_supply), "Failed to register power supply\n");

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ming Wang wangming01@loongson.cn

[ Upstream commit c33c43f71bda362b292a6e57ac41b64342dc87b3 ]

On certain Loongson platforms, drivers attempting to request a legacy ISA IRQ directly via request_irq() (e.g., IRQ 4) may fail. The virtual IRQ descriptor is not fully initialized and lacks a valid irqchip.

This issue does not affect ACPI-enumerated devices described in DSDT, as their interrupts are properly mapped via the GSI translation path. This indicates the LPC irqdomain itself is functional but is not correctly handling direct VIRQ-to-HWIRQ mappings.

The root cause is the use of irq_domain_create_linear(). This API sets up a domain for dynamic, on-demand mapping, typically triggered by a GSI request. It does not pre-populate the mappings for the legacy VIRQ range (0-15). Consequently, if no ACPI device claims a specific GSI (e.g., GSI 4), the corresponding VIRQ (e.g., VIRQ 4) is never mapped to the LPC domain. A direct call to request_irq(4, ...) then fails because the kernel cannot resolve this VIRQ to a hardware interrupt managed by the LPC controller.

The PCH-LPC interrupt controller is an i8259-compatible legacy device that requires a deterministic, static 1-to-1 mapping for IRQs 0-15 to support legacy drivers.

Fix this by replacing irq_domain_create_linear() with irq_domain_create_legacy(). This API is specifically designed for such controllers. It establishes the required static 1-to-1 VIRQ-to-HWIRQ mapping for the entire legacy range (0-15) immediately upon domain creation. This ensures that any VIRQ in this range is always resolvable, making direct calls to request_irq() for legacy IRQs function correctly.

Signed-off-by: Ming Wang wangming01@loongson.cn Signed-off-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-loongson-pch-lpc.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-pch-lpc.c b/drivers/irqchip/irq-loongson-pch-lpc.c index 2d4c3ec128b8f..912bf50a5c7ca 100644 --- a/drivers/irqchip/irq-loongson-pch-lpc.c +++ b/drivers/irqchip/irq-loongson-pch-lpc.c @@ -200,8 +200,13 @@ int __init pch_lpc_acpi_init(struct irq_domain *parent, goto iounmap_base; }

- priv->lpc_domain = irq_domain_create_linear(irq_handle, LPC_COUNT, - &pch_lpc_domain_ops, priv); + /* + * The LPC interrupt controller is a legacy i8259-compatible device, + * which requires a static 1:1 mapping for IRQs 0-15. + * Use irq_domain_create_legacy to establish this static mapping early. + */ + priv->lpc_domain = irq_domain_create_legacy(irq_handle, LPC_COUNT, 0, 0, + &pch_lpc_domain_ops, priv); if (!priv->lpc_domain) { pr_err("Failed to create IRQ domain\n"); goto free_irq_handle;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Quanyang Wang quanyang.wang@windriver.com

[ Upstream commit 0e3f9140ad04dca9a6a93dd6a6decdc53fd665ca ]

When secure-boot mode of bootloader is enabled, the registers of coresight are not permitted to access that's why disable it by default.

Signed-off-by: Quanyang Wang quanyang.wang@windriver.com Signed-off-by: Michal Simek michal.simek@amd.com Link: https://lore.kernel.org/r/7e308b8efe977c4912079b4d1b1ab3d24908559e.175679977... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index b1b31dcf6291b..e2ad5fb2cb0a4 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -450,6 +450,7 @@ reg = <0x0 0xfec10000 0x0 0x1000>; clock-names = "apb_pclk"; cpu = <&cpu0>; + status = "disabled"; };

cpu1_debug: debug@fed10000 { @@ -457,6 +458,7 @@ reg = <0x0 0xfed10000 0x0 0x1000>; clock-names = "apb_pclk"; cpu = <&cpu1>; + status = "disabled"; };

cpu2_debug: debug@fee10000 { @@ -464,6 +466,7 @@ reg = <0x0 0xfee10000 0x0 0x1000>; clock-names = "apb_pclk"; cpu = <&cpu2>; + status = "disabled"; };

cpu3_debug: debug@fef10000 { @@ -471,6 +474,7 @@ reg = <0x0 0xfef10000 0x0 0x1000>; clock-names = "apb_pclk"; cpu = <&cpu3>; + status = "disabled"; };

/* GDMA */

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Svyatoslav Ryhel clamor95@gmail.com

[ Upstream commit b9c01adedf38c69abb725a60a05305ef70dbce03 ]

Add missing Tegra114 nvmem cells and fuse lookups which were added for Tegra124+ but omitted for Tegra114.

Signed-off-by: Svyatoslav Ryhel clamor95@gmail.com Reviewed-by: Mikko Perttunen mperttunen@nvidia.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/tegra/fuse/fuse-tegra30.c | 122 ++++++++++++++++++++++++++ 1 file changed, 122 insertions(+)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c index e24ab5f7d2bf1..524fa1b0cd3d6 100644 --- a/drivers/soc/tegra/fuse/fuse-tegra30.c +++ b/drivers/soc/tegra/fuse/fuse-tegra30.c @@ -117,6 +117,124 @@ const struct tegra_fuse_soc tegra30_fuse_soc = { #endif

#ifdef CONFIG_ARCH_TEGRA_114_SOC +static const struct nvmem_cell_info tegra114_fuse_cells[] = { + { + .name = "tsensor-cpu1", + .offset = 0x084, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-cpu2", + .offset = 0x088, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-common", + .offset = 0x08c, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-cpu0", + .offset = 0x098, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "xusb-pad-calibration", + .offset = 0x0f0, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-cpu3", + .offset = 0x12c, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-gpu", + .offset = 0x154, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-mem0", + .offset = 0x158, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-mem1", + .offset = 0x15c, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-pllx", + .offset = 0x160, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, +}; + +static const struct nvmem_cell_lookup tegra114_fuse_lookups[] = { + { + .nvmem_name = "fuse", + .cell_name = "xusb-pad-calibration", + .dev_id = "7009f000.padctl", + .con_id = "calibration", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-common", + .dev_id = "700e2000.thermal-sensor", + .con_id = "common", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu0", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu0", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu1", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu1", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu2", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu2", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu3", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu3", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-mem0", + .dev_id = "700e2000.thermal-sensor", + .con_id = "mem0", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-mem1", + .dev_id = "700e2000.thermal-sensor", + .con_id = "mem1", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-gpu", + .dev_id = "700e2000.thermal-sensor", + .con_id = "gpu", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-pllx", + .dev_id = "700e2000.thermal-sensor", + .con_id = "pllx", + }, +}; + static const struct tegra_fuse_info tegra114_fuse_info = { .read = tegra30_fuse_read, .size = 0x2a0, @@ -127,6 +245,10 @@ const struct tegra_fuse_soc tegra114_fuse_soc = { .init = tegra30_fuse_init, .speedo_init = tegra114_init_speedo_data, .info = &tegra114_fuse_info, + .lookups = tegra114_fuse_lookups, + .num_lookups = ARRAY_SIZE(tegra114_fuse_lookups), + .cells = tegra114_fuse_cells, + .num_cells = ARRAY_SIZE(tegra114_fuse_cells), .soc_attr_group = &tegra_soc_attr_group, .clk_suspend_on = false, };

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Svyatoslav Ryhel clamor95@gmail.com

[ Upstream commit cca41614d15ce2bbc2c661362d3eafe53c9990af ]

Add missing interrupt to magnetometer node.

Tested-by: Winona Schroeer-Smith wolfizen@wolfizen.net # ASUS SL101 Tested-by: Antoni Aloy Torrens aaloytorrens@gmail.com # ASUS TF101 Signed-off-by: Svyatoslav Ryhel clamor95@gmail.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts index e118809dc6d98..676ed51aa2cee 100644 --- a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts +++ b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts @@ -502,6 +502,9 @@ compatible = "asahi-kasei,ak8974"; reg = <0xe>;

+ interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_EDGE_RISING>; + avdd-supply = <&vdd_3v3_sys>; dvdd-supply = <&vdd_1v8_sys>;

6.12-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nikita Travkin nikita@trvn.ru

[ Upstream commit 3cc9a8cadaf66e1a53e5fee48f8bcdb0a3fd5075 ]

When SHM bridge is enabled, assigning RMTFS memory causes the calling core to hang if the system is running in EL1.

Disable SHM bridge on sc7180 devices to avoid that hang.

Signed-off-by: Nikita Travkin nikita@trvn.ru Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@oss.qualcomm.com Link: https://lore.kernel.org/r/20250721-sc7180-shm-hang-v1-1-99ad9ffeb5b4@trvn.ru Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/qcom/qcom_tzmem.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/firmware/qcom/qcom_tzmem.c b/drivers/firmware/qcom/qcom_tzmem.c index 92b3651782355..f8fef622e48fe 100644 --- a/drivers/firmware/qcom/qcom_tzmem.c +++ b/drivers/firmware/qcom/qcom_tzmem.c @@ -76,6 +76,7 @@ static bool qcom_tzmem_using_shm_bridge;

/* List of machines that are known to not support SHM bridge correctly. */ static const char *const qcom_tzmem_blacklist[] = { + "qcom,sc7180", /* hang in rmtfs memory assignment */ "qcom,sc8180x", "qcom,sdm670", /* failure in GPU firmware loading */ "qcom,sdm845", /* reset in rmtfs memory assignment */

6.12-stable review patch. If anyone has any objections, please let me know.

------------------