From: Geert Uytterhoeven geert+renesas@glider.be

[ Upstream commit 97f26702bc95b5c3a72671d5c6675e4d6ee0a2f4 ]

SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2.

Fixes: dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 369092e17e341..016b84552a62a 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -937,6 +937,9 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled";

From: Yafang Shao laoar.shao@gmail.com

[ Upstream commit c9e4576743eeda8d24dedc164d65b78877f9a98c ]

When sock recvbuff is set by bpf_setsockopt(), the value must by limited by rmem_max. It is the same with sendbuff.

Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf") Signed-off-by: Yafang Shao laoar.shao@gmail.com Acked-by: Martin KaFai Lau kafai@fb.com Acked-by: Lawrence Brakmo brakmo@fb.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/filter.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/net/core/filter.c b/net/core/filter.c index 41ede90fc28f5..61396648381e5 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -3081,10 +3081,12 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock, /* Only some socketops are supported */ switch (optname) { case SO_RCVBUF: + val = min_t(u32, val, sysctl_rmem_max); sk->sk_userlocks |= SOCK_RCVBUF_LOCK; sk->sk_rcvbuf = max_t(int, val * 2, SOCK_MIN_RCVBUF); break; case SO_SNDBUF: + val = min_t(u32, val, sysctl_wmem_max); sk->sk_userlocks |= SOCK_SNDBUF_LOCK; sk->sk_sndbuf = max_t(int, val * 2, SOCK_MIN_SNDBUF); break;

From: Srinivas Kandagatla srinivas.kandagatla@linaro.org

[ Upstream commit 2a81efb0de0e33f2d2c83154af0bd3ce389b3269 ]

Add compatible to gicv3 node to enable quirk required to restrict writing to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor.

With this quirk MSM8996 can at least boot out of mainline, which can help community to work with boards based on MSM8996.

Without this patch Qualcomm DB820c board reboots on mainline.

Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Andy Gross andy.gross@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index ab00be277c6fc..6f372ec055dd3 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -359,7 +359,7 @@ };

intc: interrupt-controller@9bc0000 { - compatible = "arm,gic-v3"; + compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; #interrupt-cells = <3>; interrupt-controller; #redistributor-regions = <1>;

From: Anders Roxell anders.roxell@linaro.org

[ Upstream commit f2105d42597f4d10e431b195d69e96dccaf9b012 ]

Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is set to module then the following link error occurs.

aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl': drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp': drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host': drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp': drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum': drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral': drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' make[1]: *** [Makefile:1020: vmlinux] Error 1 make[1]: Target 'Image' not remade because of errors. make: *** [Makefile:152: sub-make] Error 2 make: Target 'Image' not remade because of errors.

Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin.

Signed-off-by: Anders Roxell anders.roxell@linaro.org Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/phy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index aff702c0eb9fb..85a92d0813dd0 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -21,7 +21,7 @@ config AB8500_USB

config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM + depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y' select USB_PHY help

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit ff9fb72bc07705c00795ca48631f7fffe24d2c6b ]

When an error happens, debugfs should return an error pointer value, not NULL. This will prevent the totally theoretical error where a debugfs call fails due to lack of memory, returning NULL, and that dentry value is then passed to another debugfs call, which would end up succeeding, creating a file at the root of the debugfs tree, but would then be impossible to remove (because you can not remove the directory NULL).

So, to make everyone happy, always return errors, this makes the users of debugfs much simpler (they do not have to ever check the return value), and everyone can rest easy.

Reported-by: Gary R Hook ghook@amd.com Reported-by: Heiko Carstens heiko.carstens@de.ibm.com Reported-by: Masami Hiramatsu mhiramat@kernel.org Reported-by: Michal Hocko mhocko@kernel.org Reported-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Reported-by: Ulf Hansson ulf.hansson@linaro.org Reviewed-by: Masami Hiramatsu mhiramat@kernel.org Reviewed-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/debugfs/inode.c | 39 ++++++++++++++++++++++----------------- 1 file changed, 22 insertions(+), 17 deletions(-)

diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index ccfe1e1cb6bc3..0bbe2df9077c6 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -252,8 +252,8 @@ MODULE_ALIAS_FS("debugfs"); * @parent: a pointer to the parent dentry of the file. * * This function will return a pointer to a dentry if it succeeds. If the file - * doesn't exist or an error occurs, %NULL will be returned. The returned - * dentry must be passed to dput() when it is no longer needed. + * doesn't exist or an error occurs, %ERR_PTR(-ERROR) will be returned. The + * returned dentry must be passed to dput() when it is no longer needed. * * If debugfs is not enabled in the kernel, the value -%ENODEV will be * returned. @@ -263,7 +263,7 @@ struct dentry *debugfs_lookup(const char *name, struct dentry *parent) struct dentry *dentry;

if (IS_ERR(parent)) - return NULL; + return parent;

if (!parent) parent = debugfs_mount->mnt_root; @@ -273,10 +273,10 @@ struct dentry *debugfs_lookup(const char *name, struct dentry *parent) inode_unlock(d_inode(parent));

if (IS_ERR(dentry)) - return NULL; + return dentry; if (!d_really_is_positive(dentry)) { dput(dentry); - return NULL; + return ERR_PTR(-EINVAL); } return dentry; } @@ -325,7 +325,7 @@ static struct dentry *failed_creating(struct dentry *dentry) inode_unlock(d_inode(dentry->d_parent)); dput(dentry); simple_release_fs(&debugfs_mount, &debugfs_mount_count); - return NULL; + return ERR_PTR(-ENOMEM); }

static struct dentry *end_creating(struct dentry *dentry) @@ -348,7 +348,7 @@ static struct dentry *__debugfs_create_file(const char *name, umode_t mode, dentry = start_creating(name, parent);

if (IS_ERR(dentry)) - return NULL; + return dentry;

inode = debugfs_get_inode(dentry->d_sb); if (unlikely(!inode)) @@ -386,7 +386,8 @@ static struct dentry *__debugfs_create_file(const char *name, umode_t mode, * This function will return a pointer to a dentry if it succeeds. This * pointer must be passed to the debugfs_remove() function when the file is * to be removed (no automatic cleanup happens if your module is unloaded, - * you are responsible here.) If an error occurs, %NULL will be returned. + * you are responsible here.) If an error occurs, %ERR_PTR(-ERROR) will be + * returned. * * If debugfs is not enabled in the kernel, the value -%ENODEV will be * returned. @@ -464,7 +465,8 @@ EXPORT_SYMBOL_GPL(debugfs_create_file_unsafe); * This function will return a pointer to a dentry if it succeeds. This * pointer must be passed to the debugfs_remove() function when the file is * to be removed (no automatic cleanup happens if your module is unloaded, - * you are responsible here.) If an error occurs, %NULL will be returned. + * you are responsible here.) If an error occurs, %ERR_PTR(-ERROR) will be + * returned. * * If debugfs is not enabled in the kernel, the value -%ENODEV will be * returned. @@ -495,7 +497,8 @@ EXPORT_SYMBOL_GPL(debugfs_create_file_size); * This function will return a pointer to a dentry if it succeeds. This * pointer must be passed to the debugfs_remove() function when the file is * to be removed (no automatic cleanup happens if your module is unloaded, - * you are responsible here.) If an error occurs, %NULL will be returned. + * you are responsible here.) If an error occurs, %ERR_PTR(-ERROR) will be + * returned. * * If debugfs is not enabled in the kernel, the value -%ENODEV will be * returned. @@ -506,7 +509,7 @@ struct dentry *debugfs_create_dir(const char *name, struct dentry *parent) struct inode *inode;

if (IS_ERR(dentry)) - return NULL; + return dentry;

inode = debugfs_get_inode(dentry->d_sb); if (unlikely(!inode)) @@ -545,7 +548,7 @@ struct dentry *debugfs_create_automount(const char *name, struct inode *inode;

if (IS_ERR(dentry)) - return NULL; + return dentry;

inode = debugfs_get_inode(dentry->d_sb); if (unlikely(!inode)) @@ -581,8 +584,8 @@ EXPORT_SYMBOL(debugfs_create_automount); * This function will return a pointer to a dentry if it succeeds. This * pointer must be passed to the debugfs_remove() function when the symbolic * link is to be removed (no automatic cleanup happens if your module is - * unloaded, you are responsible here.) If an error occurs, %NULL will be - * returned. + * unloaded, you are responsible here.) If an error occurs, %ERR_PTR(-ERROR) + * will be returned. * * If debugfs is not enabled in the kernel, the value -%ENODEV will be * returned. @@ -594,12 +597,12 @@ struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent, struct inode *inode; char *link = kstrdup(target, GFP_KERNEL); if (!link) - return NULL; + return ERR_PTR(-ENOMEM);

dentry = start_creating(name, parent); if (IS_ERR(dentry)) { kfree(link); - return NULL; + return dentry; }

inode = debugfs_get_inode(dentry->d_sb); @@ -806,7 +809,9 @@ struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry, if (dentry && !IS_ERR(dentry)) dput(dentry); unlock_rename(new_dir, old_dir); - return NULL; + if (IS_ERR(dentry)) + return dentry; + return ERR_PTR(-EINVAL); } EXPORT_SYMBOL_GPL(debugfs_rename);

From: Jose Abreu jose.abreu@synopsys.com

[ Upstream commit 4ec5302fa906ec9d86597b236f62315bacdb9622 ]

If we don't have DT then stmmac_clk will not be available. Let's add a new Platform Data field so that we can specify the refclk by this mean.

This way we can still use the coalesce command in PCI based setups.

Signed-off-by: Jose Abreu joabreu@synopsys.com Cc: Joao Pinto jpinto@synopsys.com Cc: David S. Miller davem@davemloft.net Cc: Giuseppe Cavallaro peppe.cavallaro@st.com Cc: Alexandre Torgue alexandre.torgue@st.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 14 ++++++++++---- include/linux/stmmac.h | 1 + 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index c3c6335cbe9ae..ecddd9948788a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -702,8 +702,11 @@ static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv) { unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);

- if (!clk) - return 0; + if (!clk) { + clk = priv->plat->clk_ref_rate; + if (!clk) + return 0; + }

return (usec * (clk / 1000000)) / 256; } @@ -712,8 +715,11 @@ static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv) { unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);

- if (!clk) - return 0; + if (!clk) { + clk = priv->plat->clk_ref_rate; + if (!clk) + return 0; + }

return (riwt * 256) / (clk / 1000000); } diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 32feac5bbd75b..5844105a482bc 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -183,6 +183,7 @@ struct plat_stmmacenet_data { struct clk *pclk; struct clk *clk_ptp_ref; unsigned int clk_ptp_rate; + unsigned int clk_ref_rate; struct reset_control *stmmac_rst; struct stmmac_axi *axi; int has_gmac4;

From: Jose Abreu jose.abreu@synopsys.com

[ Upstream commit e2cd682deb231ba6f80524bb84e57e7138261149 ]

In stmmac xmit callback we use a different flow for TSO packets but TSO xmit callback is not disabling the EEE mode.

Fix this by disabling earlier the EEE mode, i.e. before calling the TSO xmit callback.

Signed-off-by: Jose Abreu joabreu@synopsys.com Cc: Joao Pinto jpinto@synopsys.com Cc: David S. Miller davem@davemloft.net Cc: Giuseppe Cavallaro peppe.cavallaro@st.com Cc: Alexandre Torgue alexandre.torgue@st.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index bed71e295d9ff..cd6d0045c39f6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3017,6 +3017,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)

tx_q = &priv->tx_queue[queue];

+ if (priv->tx_path_in_lpi_mode) + stmmac_disable_eee_mode(priv); + /* Manage oversized TCP frames for GMAC4 device */ if (skb_is_gso(skb) && priv->tso) { if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { @@ -3044,9 +3047,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_BUSY; }

- if (priv->tx_path_in_lpi_mode) - stmmac_disable_eee_mode(priv); - entry = tx_q->cur_tx; first_entry = entry;

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 2c1cf00eeacb784781cf1c9896b8af001246d339 ]

If create_buf_file() returns an error, don't try to reference it later as a valid dentry pointer.

This problem was exposed when debugfs started to return errors instead of just NULL for some calls when they do not succeed properly.

Also, the check for WARN_ON(dentry) was just wrong :)

Reported-by: Kees Cook keescook@chromium.org Reported-and-tested-by: syzbot+16c3a70e1e9b29346c43@syzkaller.appspotmail.com Reported-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Cc: Andrew Morton akpm@linux-foundation.org Cc: David Rientjes rientjes@google.com Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL") Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/relay.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/relay.c b/kernel/relay.c index 1537158c67b38..61d37e6da22dd 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -427,6 +427,8 @@ static struct dentry *relay_create_buf_file(struct rchan *chan, dentry = chan->cb->create_buf_file(tmpname, chan->parent, S_IRUSR, buf, &chan->is_global); + if (IS_ERR(dentry)) + dentry = NULL;

kfree(tmpname);

@@ -460,7 +462,7 @@ static struct rchan_buf *relay_open_buf(struct rchan *chan, unsigned int cpu) dentry = chan->cb->create_buf_file(NULL, NULL, S_IRUSR, buf, &chan->is_global); - if (WARN_ON(dentry)) + if (IS_ERR_OR_NULL(dentry)) goto free_buf; }

From: Martynas Pumputis m@lambda.lt

[ Upstream commit 1bb54c4071f585ebef56ce8fdfe6026fa2cbcddd ]

Previously, bpf_num_possible_cpus() had a bug when calculating a number of possible CPUs in the case of sparse CPU allocations, as it was considering only the first range or element of /sys/devices/system/cpu/possible.

E.g. in the case of "0,2-3" (CPU 1 is not available), the function returned 1 instead of 3.

This patch fixes the function by making it parse all CPU ranges and elements.

Signed-off-by: Martynas Pumputis m@lambda.lt Acked-by: Yonghong Song yhs@fb.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/bpf/bpf_util.h | 30 +++++++++++++++++--------- 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/tools/testing/selftests/bpf/bpf_util.h b/tools/testing/selftests/bpf/bpf_util.h index d0811b3d6a6f1..4bf7203649344 100644 --- a/tools/testing/selftests/bpf/bpf_util.h +++ b/tools/testing/selftests/bpf/bpf_util.h @@ -13,7 +13,7 @@ static inline unsigned int bpf_num_possible_cpus(void) unsigned int start, end, possible_cpus = 0; char buff[128]; FILE *fp; - int n; + int len, n, i, j = 0;

fp = fopen(fcpu, "r"); if (!fp) { @@ -21,17 +21,27 @@ static inline unsigned int bpf_num_possible_cpus(void) exit(1); }

- while (fgets(buff, sizeof(buff), fp)) { - n = sscanf(buff, "%u-%u", &start, &end); - if (n == 0) { - printf("Failed to retrieve # possible CPUs!\n"); - exit(1); - } else if (n == 1) { - end = start; + if (!fgets(buff, sizeof(buff), fp)) { + printf("Failed to read %s!\n", fcpu); + exit(1); + } + + len = strlen(buff); + for (i = 0; i <= len; i++) { + if (buff[i] == ',' || buff[i] == '\0') { + buff[i] = '\0'; + n = sscanf(&buff[j], "%u-%u", &start, &end); + if (n <= 0) { + printf("Failed to retrieve # possible CPUs!\n"); + exit(1); + } else if (n == 1) { + end = start; + } + possible_cpus += end - start + 1; + j = i + 1; } - possible_cpus = start == 0 ? end + 1 : 0; - break; } + fclose(fp);

return possible_cpus;

From: Paul Kocialkowski paul.kocialkowski@bootlin.com

[ Upstream commit b14e945bda8ae227d1bf2b1837c0c4a61721cd1a ]

When initializing clocks, a reference to the TCON channel 0 clock is obtained. However, the clock is never prepared and enabled later. Switching from simplefb to DRM actually disables the clock (that was usually configured by U-Boot) because of that.

On the V3s, this results in a hang when writing to some mixer registers when switching over to DRM from simplefb.

Fix this by preparing and enabling the clock when initializing other clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is apparently too late and results in the same mixer register access hang.

Signed-off-by: Paul Kocialkowski paul.kocialkowski@bootlin.com Signed-off-by: Maxime Ripard maxime.ripard@bootlin.com Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.ko... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 7b909d814d38c..095bd6b4ae80d 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -371,6 +371,7 @@ static int sun4i_tcon_init_clocks(struct device *dev, dev_err(dev, "Couldn't get the TCON channel 0 clock\n"); return PTR_ERR(tcon->sclk0); } + clk_prepare_enable(tcon->sclk0);

if (tcon->quirks->has_channel_1) { tcon->sclk1 = devm_clk_get(dev, "tcon-ch1"); @@ -385,6 +386,7 @@ static int sun4i_tcon_init_clocks(struct device *dev,

static void sun4i_tcon_free_clocks(struct sun4i_tcon *tcon) { + clk_disable_unprepare(tcon->sclk0); clk_disable_unprepare(tcon->clk); }

From: Stefano Garzarella sgarzare@redhat.com

[ Upstream commit 22b5c0b63f32568e130fa2df4ba23efce3eb495b ]

virtio_vsock_remove() invokes the vsock_core_exit() also if there are opened sockets for the AF_VSOCK protocol family. In this way the vsock "transport" pointer is set to NULL, triggering the kernel panic at the first socket activity.

This patch move the vsock_core_init()/vsock_core_exit() in the virtio_vsock respectively in module_init and module_exit functions, that cannot be invoked until there are open sockets.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699 Reported-by: Yan Fu yafu@redhat.com Signed-off-by: Stefano Garzarella sgarzare@redhat.com Acked-by: Stefan Hajnoczi stefanha@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/vmw_vsock/virtio_transport.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c index fdb294441682b..8cdf6ddec9b7d 100644 --- a/net/vmw_vsock/virtio_transport.c +++ b/net/vmw_vsock/virtio_transport.c @@ -75,6 +75,9 @@ static u32 virtio_transport_get_local_cid(void) { struct virtio_vsock *vsock = virtio_vsock_get();

+ if (!vsock) + return VMADDR_CID_ANY; + return vsock->guest_cid; }

@@ -584,10 +587,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)

virtio_vsock_update_guest_cid(vsock);

- ret = vsock_core_init(&virtio_transport.transport); - if (ret < 0) - goto out_vqs; - vsock->rx_buf_nr = 0; vsock->rx_buf_max_nr = 0; atomic_set(&vsock->queued_replies, 0); @@ -618,8 +617,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev) mutex_unlock(&the_virtio_vsock_mutex); return 0;

-out_vqs: - vsock->vdev->config->del_vqs(vsock->vdev); out: kfree(vsock); mutex_unlock(&the_virtio_vsock_mutex); @@ -669,7 +666,6 @@ static void virtio_vsock_remove(struct virtio_device *vdev)

mutex_lock(&the_virtio_vsock_mutex); the_virtio_vsock = NULL; - vsock_core_exit(); mutex_unlock(&the_virtio_vsock_mutex);

vdev->config->del_vqs(vdev); @@ -702,14 +698,28 @@ static int __init virtio_vsock_init(void) virtio_vsock_workqueue = alloc_workqueue("virtio_vsock", 0, 0); if (!virtio_vsock_workqueue) return -ENOMEM; + ret = register_virtio_driver(&virtio_vsock_driver); if (ret) - destroy_workqueue(virtio_vsock_workqueue); + goto out_wq; + + ret = vsock_core_init(&virtio_transport.transport); + if (ret) + goto out_vdr; + + return 0; + +out_vdr: + unregister_virtio_driver(&virtio_vsock_driver); +out_wq: + destroy_workqueue(virtio_vsock_workqueue); return ret; + }

static void __exit virtio_vsock_exit(void) { + vsock_core_exit(); unregister_virtio_driver(&virtio_vsock_driver); destroy_workqueue(virtio_vsock_workqueue); }

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit 6454368a804c4955ccd116236037536f81e5b1f1 ]

In case of mapping error the DMA addresses are invalid and continuing will screw system memory or potentially something else.

[ 222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0) ... [ 240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000 [ 240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b [ 240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf ...

Abort any test if mapping failed.

Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data") Cc: Dan Williams dan.j.williams@intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/dmatest.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 80cc2be6483cb..e393361277415 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -626,11 +626,9 @@ static int dmatest_func(void *data) srcs[i] = um->addr[i] + src_off; ret = dma_mapping_error(dev->dev, um->addr[i]); if (ret) { - dmaengine_unmap_put(um); result("src mapping error", total_tests, src_off, dst_off, len, ret); - failed_tests++; - continue; + goto error_unmap_continue; } um->to_cnt++; } @@ -645,11 +643,9 @@ static int dmatest_func(void *data) DMA_BIDIRECTIONAL); ret = dma_mapping_error(dev->dev, dsts[i]); if (ret) { - dmaengine_unmap_put(um); result("dst mapping error", total_tests, src_off, dst_off, len, ret); - failed_tests++; - continue; + goto error_unmap_continue; } um->bidi_cnt++; } @@ -679,12 +675,10 @@ static int dmatest_func(void *data) }

if (!tx) { - dmaengine_unmap_put(um); result("prep error", total_tests, src_off, dst_off, len, ret); msleep(100); - failed_tests++; - continue; + goto error_unmap_continue; }

done->done = false; @@ -693,12 +687,10 @@ static int dmatest_func(void *data) cookie = tx->tx_submit(tx);

if (dma_submit_error(cookie)) { - dmaengine_unmap_put(um); result("submit error", total_tests, src_off, dst_off, len, ret); msleep(100); - failed_tests++; - continue; + goto error_unmap_continue; } dma_async_issue_pending(chan);

@@ -711,16 +703,14 @@ static int dmatest_func(void *data) dmaengine_unmap_put(um); result("test timed out", total_tests, src_off, dst_off, len, 0); - failed_tests++; - continue; + goto error_unmap_continue; } else if (status != DMA_COMPLETE) { dmaengine_unmap_put(um); result(status == DMA_ERROR ? "completion error status" : "completion busy status", total_tests, src_off, dst_off, len, ret); - failed_tests++; - continue; + goto error_unmap_continue; }

dmaengine_unmap_put(um); @@ -765,6 +755,12 @@ static int dmatest_func(void *data) verbose_result("test passed", total_tests, src_off, dst_off, len, 0); } + + continue; + +error_unmap_continue: + dmaengine_unmap_put(um); + failed_tests++; } ktime = ktime_sub(ktime_get(), ktime); ktime = ktime_sub(ktime, comparetime);

From: Florian Westphal fw@strlen.de

[ Upstream commit 98bfc3414bda335dbd7fec58bde6266f991801d7 ]

Check basic nat/redirect/masquerade for ipv4 and ipv6.

Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/netfilter/Makefile | 2 +- tools/testing/selftests/netfilter/nft_nat.sh | 762 +++++++++++++++++++ 2 files changed, 763 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/netfilter/nft_nat.sh

diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index 47ed6cef93fb8..c9ff2b47bd1ca 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for netfilter selftests

-TEST_PROGS := nft_trans_stress.sh +TEST_PROGS := nft_trans_stress.sh nft_nat.sh

include ../lib.mk diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh new file mode 100755 index 0000000000000..8ec76681605cc --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -0,0 +1,762 @@ +#!/bin/bash +# +# This test is for basic NAT functionality: snat, dnat, redirect, masquerade. +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +ip netns add ns0 +ip netns add ns1 +ip netns add ns2 + +ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 +ip link add veth1 netns ns0 type veth peer name eth0 netns ns2 + +ip -net ns0 link set lo up +ip -net ns0 link set veth0 up +ip -net ns0 addr add 10.0.1.1/24 dev veth0 +ip -net ns0 addr add dead:1::1/64 dev veth0 + +ip -net ns0 link set veth1 up +ip -net ns0 addr add 10.0.2.1/24 dev veth1 +ip -net ns0 addr add dead:2::1/64 dev veth1 + +for i in 1 2; do + ip -net ns$i link set lo up + ip -net ns$i link set eth0 up + ip -net ns$i addr add 10.0.$i.99/24 dev eth0 + ip -net ns$i route add default via 10.0.$i.1 + ip -net ns$i addr add dead:$i::99/64 dev eth0 + ip -net ns$i route add default via dead:$i::1 +done + +bad_counter() +{ + local ns=$1 + local counter=$2 + local expect=$3 + + echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2 + ip netns exec $ns nft list counter inet filter $counter 1>&2 +} + +check_counters() +{ + ns=$1 + local lret=0 + + cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84") + if [ $? -ne 0 ]; then + bad_counter $ns ns0in "packets 1 bytes 84" + lret=1 + fi + cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84") + if [ $? -ne 0 ]; then + bad_counter $ns ns0out "packets 1 bytes 84" + lret=1 + fi + + expect="packets 1 bytes 104" + cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter $ns ns0in6 "$expect" + lret=1 + fi + cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter $ns ns0out6 "$expect" + lret=1 + fi + + return $lret +} + +check_ns0_counters() +{ + local ns=$1 + local lret=0 + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0in "packets 0 bytes 0" + lret=1 + fi + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0in6 "packets 0 bytes 0" + lret=1 + fi + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0out "packets 0 bytes 0" + lret=1 + fi + cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0out6 "packets 0 bytes 0" + lret=1 + fi + + for dir in "in" "out" ; do + expect="packets 1 bytes 84" + cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 $ns$dir "$expect" + lret=1 + fi + + expect="packets 1 bytes 104" + cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 $ns$dir6 "$expect" + lret=1 + fi + done + + return $lret +} + +reset_counters() +{ + for i in 0 1 2;do + ip netns exec ns$i nft reset counters inet > /dev/null + done +} + +test_local_dnat6() +{ + local lret=0 +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain output { + type nat hook output priority 0; policy accept; + ip6 daddr dead:1::99 dnat to dead:2::99 + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add ip6 dnat hook" + return $ksft_skip + fi + + # ping netns1, expect rewrite to netns2 + ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping6 failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns1$dir "$expect" + lret=1 + fi + done + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns0$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was NATted to ns2" + ip netns exec ns0 nft flush chain ip6 nat output + + return $lret +} + +test_local_dnat() +{ + local lret=0 +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain output { + type nat hook output priority 0; policy accept; + ip daddr 10.0.1.99 dnat to 10.0.2.99 + } +} +EOF + # ping netns1, expect rewrite to netns2 + ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns1$dir "$expect" + lret=1 + fi + done + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns0$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to ns1 was NATted to ns2" + + ip netns exec ns0 nft flush chain ip nat output + + reset_counters + ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns1$dir "$expect" + lret=1 + fi + done + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 1 count in ns1 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0$dir "$expect" + lret=1 + fi + done + + # expect 0 packet in ns2 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns2$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to ns1 OK after nat output chain flush" + + return $lret +} + + +test_masquerade6() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 via ipv6" + return 1 + lret=1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade + } +} +EOF + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerading" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft flush chain ip6 nat postrouting + if [ $? -ne 0 ]; then + echo "ERROR: Could not flush ip6 nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IPv6 masquerade for ns2" + + return $lret +} + +test_masquerade() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: canot ping ns1 from ns2" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade + } +} +EOF + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip masquerading" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft flush chain ip nat postrouting + if [ $? -ne 0 ]; then + echo "ERROR: Could not flush nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP masquerade for ns2" + + return $lret +} + +test_redirect6() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannnot ping ns1 from ns2 via ipv6" + lret=1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 meta l4proto icmpv6 ip6 saddr dead:2::99 ip6 daddr dead:1::99 redirect + } +} +EOF + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip6 redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft delete table ip6 nat + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete ip6 nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IPv6 redirection for ns2" + + return $lret +} + +test_redirect() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 ip protocol icmp ip saddr 10.0.2.99 ip daddr 10.0.1.99 redirect + } +} +EOF + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft delete table ip nat + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP redirection for ns2" + + return $lret +} + + +# ip netns exec ns0 ping -c 1 -q 10.0.$i.99 +for i in 0 1 2; do +ip netns exec ns$i nft -f - <<EOF +table inet filter { + counter ns0in {} + counter ns1in {} + counter ns2in {} + + counter ns0out {} + counter ns1out {} + counter ns2out {} + + counter ns0in6 {} + counter ns1in6 {} + counter ns2in6 {} + + counter ns0out6 {} + counter ns1out6 {} + counter ns2out6 {} + + map nsincounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0in", + 10.0.2.1 : "ns0in", + 10.0.1.99 : "ns1in", + 10.0.2.99 : "ns2in" } + } + + map nsincounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0in6", + dead:2::1 : "ns0in6", + dead:1::99 : "ns1in6", + dead:2::99 : "ns2in6" } + } + + map nsoutcounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0out", + 10.0.2.1 : "ns0out", + 10.0.1.99: "ns1out", + 10.0.2.99: "ns2out" } + } + + map nsoutcounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0out6", + dead:2::1 : "ns0out6", + dead:1::99 : "ns1out6", + dead:2::99 : "ns2out6" } + } + + chain input { + type filter hook input priority 0; policy accept; + counter name ip saddr map @nsincounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 saddr map @nsincounter6 + } + chain output { + type filter hook output priority 0; policy accept; + counter name ip daddr map @nsoutcounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 daddr map @nsoutcounter6 + } +} +EOF +done + +sleep 3 +# test basic connectivity +for i in 1 2; do + ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null + if [ $? -ne 0 ];then + echo "ERROR: Could not reach other namespace(s)" 1>&2 + ret=1 + fi + + ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null + if [ $? -ne 0 ];then + echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2 + ret=1 + fi + check_counters ns$i + if [ $? -ne 0 ]; then + ret=1 + fi + + check_ns0_counters ns$i + if [ $? -ne 0 ]; then + ret=1 + fi + reset_counters +done + +if [ $ret -eq 0 ];then + echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2" +fi + +reset_counters +test_local_dnat +test_local_dnat6 + +reset_counters +test_masquerade +test_masquerade6 + +reset_counters +test_redirect +test_redirect6 + +for i in 0 1 2; do ip netns del ns$i;done + +exit $ret

From: Julian Wiedmann jwi@linux.ibm.com

[ Upstream commit afa0c5904ba16d59b0454f7ee4c807dae350f432 ]

The error path in qeth_alloc_qdio_buffers() that takes care of cleaning up the Output Queues is buggy. It first frees the queue, but then calls qeth_clear_outq_buffers() with that very queue struct.

Make the call to qeth_clear_outq_buffers() part of the free action (in the correct order), and while at it fix the naming of the helper.

Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann jwi@linux.ibm.com Reviewed-by: Alexandra Winter wintera@linux.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/net/qeth_core_main.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 69ef5f4060edb..6566fceef38d5 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2472,11 +2472,12 @@ static int qeth_init_qdio_out_buf(struct qeth_qdio_out_q *q, int bidx) return rc; }

-static void qeth_free_qdio_out_buf(struct qeth_qdio_out_q *q) +static void qeth_free_output_queue(struct qeth_qdio_out_q *q) { if (!q) return;

+ qeth_clear_outq_buffers(q, 1); qdio_free_buffers(q->qdio_bufs, QDIO_MAX_BUFFERS_PER_Q); kfree(q); } @@ -2549,10 +2550,8 @@ static int qeth_alloc_qdio_buffers(struct qeth_card *card) card->qdio.out_qs[i]->bufs[j] = NULL; } out_freeoutq: - while (i > 0) { - qeth_free_qdio_out_buf(card->qdio.out_qs[--i]); - qeth_clear_outq_buffers(card->qdio.out_qs[i], 1); - } + while (i > 0) + qeth_free_output_queue(card->qdio.out_qs[--i]); kfree(card->qdio.out_qs); card->qdio.out_qs = NULL; out_freepool: @@ -2585,10 +2584,8 @@ static void qeth_free_qdio_buffers(struct qeth_card *card) qeth_free_buffer_pool(card); /* free outbound qdio_qs */ if (card->qdio.out_qs) { - for (i = 0; i < card->qdio.no_out_queues; ++i) { - qeth_clear_outq_buffers(card->qdio.out_qs[i], 1); - qeth_free_qdio_out_buf(card->qdio.out_qs[i]); - } + for (i = 0; i < card->qdio.no_out_queues; i++) + qeth_free_output_queue(card->qdio.out_qs[i]); kfree(card->qdio.out_qs); card->qdio.out_qs = NULL; }

From: Arnaldo Carvalho de Melo acme@redhat.com

[ Upstream commit 6ab3bc240ade47a0f52bc16d97edd9accbe0024e ]

With a suitably defined "probe:vfs_getname" probe, 'perf trace' can "beautify" its output, so syscalls like open() or openat() can print the "filename" argument instead of just its hex address, like:

$ perf trace -e open -- touch /dev/null [...] 0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3 [...]

The output without such beautifier looks like:

0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

However, when the vfs_getname probe expands to multiple probes and it is not the first one that is hit, the beautifier fails, as following:

0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

Fix it by hooking into all the expanded probes (inlines), now, for instance:

[root@quaco ~]# perf probe -l probe:vfs_getname (on getname_flags:73@fs/namei.c with pathname) probe:vfs_getname_1 (on getname_flags:73@fs/namei.c with pathname) [root@quaco ~]# perf trace -e open* sleep 1 0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC) = 3 0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC) = 3 0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3 [root@quaco ~]#

Works, further verified with:

[root@quaco ~]# perf test vfs 65: Use vfs_getname probe to get syscall args filenames : Ok 66: Add vfs_getname probe to get syscall args filenames : Ok 67: Check open filename arg using perf trace + vfs_getname: Ok [root@quaco ~]#

Reported-by: Michael Petlan mpetlan@redhat.com Tested-by: Michael Petlan mpetlan@redhat.com Cc: Adrian Hunter adrian.hunter@intel.com Cc: Jiri Olsa jolsa@redhat.com Cc: Namhyung Kim namhyung@kernel.org Link: https://lkml.kernel.org/n/tip-mv8kolk17xla1smvmp3qabv1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/builtin-trace.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index 8e3c4ec00017d..b224bf3f2b994 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -2109,19 +2109,30 @@ static size_t trace__fprintf_thread_summary(struct trace *trace, FILE *fp);

static bool perf_evlist__add_vfs_getname(struct perf_evlist *evlist) { - struct perf_evsel *evsel = perf_evsel__newtp("probe", "vfs_getname"); + bool found = false; + struct perf_evsel *evsel, *tmp; + struct parse_events_error err = { .idx = 0, }; + int ret = parse_events(evlist, "probe:vfs_getname*", &err);

- if (IS_ERR(evsel)) + if (ret) return false;

- if (perf_evsel__field(evsel, "pathname") == NULL) { + evlist__for_each_entry_safe(evlist, evsel, tmp) { + if (!strstarts(perf_evsel__name(evsel), "probe:vfs_getname")) + continue; + + if (perf_evsel__field(evsel, "pathname")) { + evsel->handler = trace__vfs_getname; + found = true; + continue; + } + + list_del_init(&evsel->node); + evsel->evlist = NULL; perf_evsel__delete(evsel); - return false; }

- evsel->handler = trace__vfs_getname; - perf_evlist__add(evlist, evsel); - return true; + return found; }

static struct perf_evsel *perf_evsel__new_pgfault(u64 config)

From: Jun-Ru Chang jrjang@realtek.com

[ Upstream commit 2b424cfc69728224fcb5fad138ea7260728e0901 ]

Patch (b6c7a324df37b "MIPS: Fix get_frame_info() handling of microMIPS function size.") introduces additional function size check for microMIPS by only checking insn between ip and ip + func_size. However, func_size in get_frame_info() is always 0 if KALLSYMS is not enabled. This causes get_frame_info() to return immediately without calculating correct frame_size, which in turn causes "Can't analyze schedule() prologue" warning messages at boot time.

This patch removes func_size check, and let the frame_size check run up to 128 insns for both MIPS and microMIPS.

Signed-off-by: Jun-Ru Chang jrjang@realtek.com Signed-off-by: Tony Wu tonywu@realtek.com Signed-off-by: Paul Burton paul.burton@mips.com Fixes: b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size.") Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: macro@mips.com Cc: yamada.masahiro@socionext.com Cc: peterz@infradead.org Cc: mingo@kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/kernel/process.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index e8b166e9146a3..ea563bfea0e10 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -370,7 +370,7 @@ static inline int is_sp_move_ins(union mips_instruction *ip, int *frame_size) static int get_frame_info(struct mips_frame_info *info) { bool is_mmips = IS_ENABLED(CONFIG_CPU_MICROMIPS); - union mips_instruction insn, *ip, *ip_end; + union mips_instruction insn, *ip; const unsigned int max_insns = 128; unsigned int last_insn_size = 0; unsigned int i; @@ -383,10 +383,9 @@ static int get_frame_info(struct mips_frame_info *info) if (!ip) goto err;

- ip_end = (void *)ip + info->func_size; - - for (i = 0; i < max_insns && ip < ip_end; i++) { + for (i = 0; i < max_insns; i++) { ip = (void *)ip + last_insn_size; + if (is_mmips && mm_insn_16bit(ip->halfword[0])) { insn.word = ip->halfword[0] << 16; last_insn_size = 2;

From: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp

[ Upstream commit 43636c804df0126da669c261fc820fb22f62bfc2 ]

When something let __find_get_block_slow() hit all_mapped path, it calls printk() for 100+ times per a second. But there is no need to print same message with such high frequency; it is just asking for stall warning, or at least bloating log files.

[ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.873324][T15342] b_state=0x00000029, b_size=512 [ 399.878403][T15342] device loop0 blocksize: 4096 [ 399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.890400][T15342] b_state=0x00000029, b_size=512 [ 399.895595][T15342] device loop0 blocksize: 4096 [ 399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8 [ 399.907471][T15342] b_state=0x00000029, b_size=512 [ 399.912506][T15342] device loop0 blocksize: 4096

This patch reduces frequency to up to once per a second, in addition to concatenating three lines into one.

[ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096

Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Reviewed-by: Jan Kara jack@suse.cz Cc: Dmitry Vyukov dvyukov@google.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/buffer.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c index b96f3b98a6ef9..8086cc8ff0bc2 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -208,6 +208,7 @@ __find_get_block_slow(struct block_device *bdev, sector_t block) struct buffer_head *head; struct page *page; int all_mapped = 1; + static DEFINE_RATELIMIT_STATE(last_warned, HZ, 1);

index = block >> (PAGE_SHIFT - bd_inode->i_blkbits); page = find_get_page_flags(bd_mapping, index, FGP_ACCESSED); @@ -235,15 +236,15 @@ __find_get_block_slow(struct block_device *bdev, sector_t block) * file io on the block device and getblk. It gets dealt with * elsewhere, don't buffer_error if we had some unmapped buffers */ - if (all_mapped) { - printk("__find_get_block_slow() failed. " - "block=%llu, b_blocknr=%llu\n", - (unsigned long long)block, - (unsigned long long)bh->b_blocknr); - printk("b_state=0x%08lx, b_size=%zu\n", - bh->b_state, bh->b_size); - printk("device %pg blocksize: %d\n", bdev, - 1 << bd_inode->i_blkbits); + ratelimit_set_flags(&last_warned, RATELIMIT_MSG_ON_RELEASE); + if (all_mapped && __ratelimit(&last_warned)) { + printk("__find_get_block_slow() failed. block=%llu, " + "b_blocknr=%llu, b_state=0x%08lx, b_size=%zu, " + "device %pg blocksize: %d\n", + (unsigned long long)block, + (unsigned long long)bh->b_blocknr, + bh->b_state, bh->b_size, bdev, + 1 << bd_inode->i_blkbits); } out_unlock: spin_unlock(&bd_mapping->private_lock);

From: Sudarsana Reddy Kalluru skalluru@marvell.com

[ Upstream commit fb1faab74ddef9ec2d841d54e5d0912a097b3abe ]

Max supported queues is derived incorrectly in the case of multi-CoS. Need to consider TCs while calculating num_queues for PF.

Signed-off-by: Sudarsana Reddy Kalluru skalluru@marvell.com Signed-off-by: Ariel Elior aelior@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 83c1c4fa102b7..13db311c16e5e 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -2161,7 +2161,7 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev, u16 num_queues = 0;

/* Since the feature controls only queue-zones, - * make sure we have the contexts [rx, tx, xdp] to + * make sure we have the contexts [rx, xdp, tcs] to * match. */ for_each_hwfn(cdev, i) { @@ -2171,7 +2171,8 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev, u16 cids;

cids = hwfn->pf_params.eth_pf_params.num_cons; - num_queues += min_t(u16, l2_queues, cids / 3); + cids /= (2 + info->num_tc); + num_queues += min_t(u16, l2_queues, cids); }

/* queues might theoretically be >256, but interrupts'