From: Aradhya Bhatia a-bhatia1@ti.com
The crtc_* mode parameters do not get generated (duplicated in this case) from the regular parameters before the mode validation phase begins.
The rest of the code conditionally uses the crtc_* parameters only during the bridge enable phase, but sticks to the regular parameters for mode validation. In this singular instance, however, the driver tries to use the crtc_clock parameter even during the mode validation, causing the validation to fail.
Allow the D-Phy config checks to use mode->clock instead of mode->crtc_clock during mode_valid checks, like everywhere else in the driver.
Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework") Cc: stable@vger.kernel.org Reviewed-by: Tomi Valkeinen tomi.valkeinen@ideasonboard.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Tested-by: Tomi Valkeinen tomi.valkeinen@ideasonboard.com Signed-off-by: Aradhya Bhatia a-bhatia1@ti.com Signed-off-by: Aradhya Bhatia aradhya.bhatia@linux.dev --- drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c index b0a1a6774ea6..19cc8734a4c8 100644 --- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c +++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c @@ -568,13 +568,14 @@ static int cdns_dsi_check_conf(struct cdns_dsi *dsi, struct phy_configure_opts_mipi_dphy *phy_cfg = &output->phy_opts.mipi_dphy; unsigned long dsi_hss_hsa_hse_hbp; unsigned int nlanes = output->dev->lanes; + int mode_clock = (mode_valid_check ? mode->clock : mode->crtc_clock); int ret;
ret = cdns_dsi_mode2cfg(dsi, mode, dsi_cfg, mode_valid_check); if (ret) return ret;
- phy_mipi_dphy_get_default_config(mode->crtc_clock * 1000, + phy_mipi_dphy_get_default_config(mode_clock * 1000, mipi_dsi_pixel_format_to_bpp(output->dev->format), nlanes, phy_cfg);