From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit cd0eb354d441488feed6685adbeb1acd45db1b8d ]
We are not supposed to spread quirks in 8250_port module especially when we have a separate driver for the hardware in question.
Move quirk from generic module to the driver that uses it.
Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20240215145029.581389-1-andriy.shevchenko@linux.in... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/8250/8250_of.c | 44 +++++++++++++++++++++++++++-- drivers/tty/serial/8250/8250_port.c | 24 ---------------- 2 files changed, 42 insertions(+), 26 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 34f17a9785e79..9dcc17e332690 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -4,7 +4,10 @@ * * Copyright (C) 2006 Arnd Bergmann arnd@arndb.de, IBM Corp. */ + +#include <linux/bits.h> #include <linux/console.h> +#include <linux/math.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/serial_core.h> @@ -25,6 +28,36 @@ struct of_serial_info { int line; };
+/* Nuvoton NPCM timeout register */ +#define UART_NPCM_TOR 7 +#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */ + +static int npcm_startup(struct uart_port *port) +{ + /* + * Nuvoton calls the scratch register 'UART_TOR' (timeout + * register). Enable it, and set TIOC (timeout interrupt + * comparator) to be 0x20 for correct operation. + */ + serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20); + + return serial8250_do_startup(port); +} + +/* Nuvoton NPCM UARTs have a custom divisor calculation */ +static unsigned int npcm_get_divisor(struct uart_port *port, unsigned int baud, + unsigned int *frac) +{ + return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2; +} + +static int npcm_setup(struct uart_port *port) +{ + port->get_divisor = npcm_get_divisor; + port->startup = npcm_startup; + return 0; +} + /* * Fill a struct uart_port for a given device node */ @@ -164,10 +197,17 @@ static int of_platform_serial_setup(struct platform_device *ofdev, switch (type) { case PORT_RT2880: ret = rt288x_setup(port); - if (ret) - goto err_pmruntime; + break; + case PORT_NPCM: + ret = npcm_setup(port); + break; + default: + /* Nothing to do */ + ret = 0; break; } + if (ret) + goto err_pmruntime;
if (IS_REACHABLE(CONFIG_SERIAL_8250_FSL) && (of_device_is_compatible(np, "fsl,ns16550") || diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 8ca061d3bbb92..4164f8650476d 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -38,10 +38,6 @@
#include "8250.h"
-/* Nuvoton NPCM timeout register */ -#define UART_NPCM_TOR 7 -#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */ - /* * Debugging. */ @@ -2235,15 +2231,6 @@ int serial8250_do_startup(struct uart_port *port) UART_DA830_PWREMU_MGMT_FREE); }
- if (port->type == PORT_NPCM) { - /* - * Nuvoton calls the scratch register 'UART_TOR' (timeout - * register). Enable it, and set TIOC (timeout interrupt - * comparator) to be 0x20 for correct operation. - */ - serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20); - } - #ifdef CONFIG_SERIAL_8250_RSA /* * If this is an RSA port, see if we can kick it up to the @@ -2545,15 +2532,6 @@ static void serial8250_shutdown(struct uart_port *port) serial8250_do_shutdown(port); }
-/* Nuvoton NPCM UARTs have a custom divisor calculation */ -static unsigned int npcm_get_divisor(struct uart_8250_port *up, - unsigned int baud) -{ - struct uart_port *port = &up->port; - - return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2; -} - static unsigned int serial8250_do_get_divisor(struct uart_port *port, unsigned int baud, unsigned int *frac) @@ -2598,8 +2576,6 @@ static unsigned int serial8250_do_get_divisor(struct uart_port *port, quot = 0x8001; else if (magic_multiplier && baud >= port->uartclk / 12) quot = 0x8002; - else if (up->port.type == PORT_NPCM) - quot = npcm_get_divisor(up, baud); else quot = uart_get_divisor(port, baud);