6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arec Kao arec.kao@intel.com
[ Upstream commit 1af2f618acc1486e3b46cb54cb4891d47bb80c61 ]
Tell ACPI device PM code that the driver supports the device being in non-zero ACPI D state when the driver's probe function is entered.
Also do identification on the first access of the device, whether in probe or when starting streaming.
Signed-off-by: Arec Kao arec.kao@intel.com Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Stable-dep-of: 7b0454cfd8ed ("media: ov13b10: Enable runtime PM before registering async sub-device") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/i2c/ov13b10.c | 74 +++++++++++++++++++++++-------------- 1 file changed, 47 insertions(+), 27 deletions(-)
diff --git a/drivers/media/i2c/ov13b10.c b/drivers/media/i2c/ov13b10.c index 549e5d93e568..722f490f9db4 100644 --- a/drivers/media/i2c/ov13b10.c +++ b/drivers/media/i2c/ov13b10.c @@ -589,6 +589,9 @@ struct ov13b10 {
/* Streaming on/off */ bool streaming; + + /* True if the device has been identified */ + bool identified; };
#define to_ov13b10(_sd) container_of(_sd, struct ov13b10, sd) @@ -1023,12 +1026,42 @@ ov13b10_set_pad_format(struct v4l2_subdev *sd, return 0; }
+/* Verify chip ID */ +static int ov13b10_identify_module(struct ov13b10 *ov13b) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd); + int ret; + u32 val; + + if (ov13b->identified) + return 0; + + ret = ov13b10_read_reg(ov13b, OV13B10_REG_CHIP_ID, + OV13B10_REG_VALUE_24BIT, &val); + if (ret) + return ret; + + if (val != OV13B10_CHIP_ID) { + dev_err(&client->dev, "chip id mismatch: %x!=%x\n", + OV13B10_CHIP_ID, val); + return -EIO; + } + + ov13b->identified = true; + + return 0; +} + static int ov13b10_start_streaming(struct ov13b10 *ov13b) { struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd); const struct ov13b10_reg_list *reg_list; int ret, link_freq_index;
+ ret = ov13b10_identify_module(ov13b); + if (ret) + return ret; + /* Get out of from software reset */ ret = ov13b10_write_reg(ov13b, OV13B10_REG_SOFTWARE_RST, OV13B10_REG_VALUE_08BIT, OV13B10_SOFTWARE_RST); @@ -1144,27 +1177,6 @@ static int __maybe_unused ov13b10_resume(struct device *dev) return ret; }
-/* Verify chip ID */ -static int ov13b10_identify_module(struct ov13b10 *ov13b) -{ - struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd); - int ret; - u32 val; - - ret = ov13b10_read_reg(ov13b, OV13B10_REG_CHIP_ID, - OV13B10_REG_VALUE_24BIT, &val); - if (ret) - return ret; - - if (val != OV13B10_CHIP_ID) { - dev_err(&client->dev, "chip id mismatch: %x!=%x\n", - OV13B10_CHIP_ID, val); - return -EIO; - } - - return 0; -} - static const struct v4l2_subdev_video_ops ov13b10_video_ops = { .s_stream = ov13b10_set_stream, }; @@ -1379,6 +1391,7 @@ static int ov13b10_check_hwcfg(struct device *dev) static int ov13b10_probe(struct i2c_client *client) { struct ov13b10 *ov13b; + bool full_power; int ret;
/* Check HW config */ @@ -1395,11 +1408,14 @@ static int ov13b10_probe(struct i2c_client *client) /* Initialize subdev */ v4l2_i2c_subdev_init(&ov13b->sd, client, &ov13b10_subdev_ops);
- /* Check module identity */ - ret = ov13b10_identify_module(ov13b); - if (ret) { - dev_err(&client->dev, "failed to find sensor: %d\n", ret); - return ret; + full_power = acpi_dev_state_d0(&client->dev); + if (full_power) { + /* Check module identity */ + ret = ov13b10_identify_module(ov13b); + if (ret) { + dev_err(&client->dev, "failed to find sensor: %d\n", ret); + return ret; + } }
/* Set default mode to max resolution */ @@ -1431,7 +1447,10 @@ static int ov13b10_probe(struct i2c_client *client) * Device is already turned on by i2c-core with ACPI domain PM. * Enable runtime PM and turn off the device. */ - pm_runtime_set_active(&client->dev); + + /* Set the device's state to active if it's in D0 state. */ + if (full_power) + pm_runtime_set_active(&client->dev); pm_runtime_enable(&client->dev); pm_runtime_idle(&client->dev);
@@ -1480,6 +1499,7 @@ static struct i2c_driver ov13b10_i2c_driver = { }, .probe_new = ov13b10_probe, .remove = ov13b10_remove, + .flags = I2C_DRV_ACPI_WAIVE_D0_PROBE, };
module_i2c_driver(ov13b10_i2c_driver);