From: Dmitry Baryshkov dmitry.baryshkov@linaro.org
[ Upstream commit eba2158528b1882055b7fe2b7647820516178f06 ]
Change PM8921 node labels to start with pm8921_ prefix, following other Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Link: https://lore.kernel.org/r/20230928110309.1212221-9-dmitry.baryshkov@linaro.o... Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 59fd86b9fb47..b7414ebbcd4b 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -292,13 +292,13 @@ scm { */ iio-hwmon { compatible = "iio-hwmon"; - io-channels = <&xoadc 0x00 0x01>, /* Battery */ - <&xoadc 0x00 0x02>, /* DC in (charger) */ - <&xoadc 0x00 0x04>, /* VPH the main system voltage */ - <&xoadc 0x00 0x0b>, /* Die temperature */ - <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ - <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ - <&xoadc 0x00 0x0e>; /* Charger temperature */ + io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */ + <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */ + <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */ + <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */ };
soc: soc { @@ -686,7 +686,7 @@ ssbi@500000 { reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter";
- pmicintc: pmic { + pm8921: pmic { compatible = "qcom,pm8921"; interrupt-parent = <&tlmm_pinmux>; interrupts = <74 8>; @@ -721,7 +721,7 @@ pm8921_mpps: mpps@50 {
rtc@11d { compatible = "qcom,pm8921-rtc"; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8921>; interrupts = <39 1>; reg = <0x11d>; allow-set-time; @@ -730,16 +730,16 @@ rtc@11d { pwrkey@1c { compatible = "qcom,pm8921-pwrkey"; reg = <0x1c>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8921>; interrupts = <50 1>, <51 1>; debounce = <15625>; pull-up; };
- xoadc: xoadc@197 { + pm8921_xoadc: xoadc@197 { compatible = "qcom,pm8921-adc"; reg = <197>; - interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>; #address-cells = <2>; #size-cells = <0>; #io-channel-cells = <2>;