[PATCH 6.1 119/259] ARM: dts: omap: correct indentation

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

[ Upstream commit 8ae9c7a69fa14e95d032e64d8d758e3f85bee132 ]

Do not use spaces for indentation.

Link: https://lore.kernel.org/r/20221002092002.68880-1-krzysztof.kozlowski@linaro.... Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Stable-dep-of: 6469b2feade8 ("ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi | 6 +-- arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi | 6 +-- arch/arm/boot/dts/omap3-cm-t3517.dts | 12 ++--- arch/arm/boot/dts/omap3-gta04.dtsi | 6 +-- arch/arm/boot/dts/omap3-ldp.dts | 2 +- arch/arm/boot/dts/omap3-n900.dts | 38 +++++++------- arch/arm/boot/dts/omap3-zoom3.dts | 44 ++++++++-------- arch/arm/boot/dts/omap4-cpu-thermal.dtsi | 24 ++++----- arch/arm/boot/dts/omap5-cm-t54.dts | 64 +++++++++++------------ 9 files changed, 101 insertions(+), 101 deletions(-)

diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index ce6c235f68ec6..3046ec572632d 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -8,9 +8,9 @@

/ { vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; };

vdd33a: regulator-vdd33a { diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi index e7534fe9c53cf..bc8961f3690f0 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi @@ -12,9 +12,9 @@

/ { vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; };

vdd33a: regulator-vdd33a { diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index 3b8349094baa6..f25c0a84a190c 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -11,12 +11,12 @@ model = "CompuLab CM-T3517"; compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";

- vmmc: regulator-vmmc { - compatible = "regulator-fixed"; - regulator-name = "vmmc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + vmmc: regulator-vmmc { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + };

wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 2dbee248a126f..da578719ac5a2 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -332,7 +332,7 @@ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; - }; + };

gps_pins: pinmux_gps_pins { pinctrl-single,pins = < @@ -869,8 +869,8 @@ };

&hdqw1w { - pinctrl-names = "default"; - pinctrl-0 = <&hdq_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&hdq_pins>; };

/* image signal processor within OMAP3 SoC */ diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 36fc8805e0c15..85f33bbb566f9 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -301,5 +301,5 @@

&vaux1 { /* Needed for ads7846 */ - regulator-name = "vcc"; + regulator-name = "vcc"; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index dd79715564498..98a67581bdd23 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -236,27 +236,27 @@ pinctrl-single,pins = <

/* address lines */ - OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ - OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ - OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ + OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ + OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ + OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */

/* data lines, gpmc_d0..d7 not muxable according to TRM */ - OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ - OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ - OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ - OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ - OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ - OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ - OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ - OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ + OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ + OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ + OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ + OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ + OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ + OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ + OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ + OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */

/* * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable * according to TRM. OneNAND seems to require PIN_INPUT on clock. */ - OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ - OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ - >; + OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ + OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ + >; };

i2c1_pins: pinmux_i2c1_pins { @@ -738,12 +738,12 @@

si4713: si4713@63 { compatible = "silabs,si4713"; - reg = <0x63>; + reg = <0x63>;

- interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ - reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ - vio-supply = <&vio>; - vdd-supply = <&vaux1>; + interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ + reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ + vio-supply = <&vio>; + vdd-supply = <&vaux1>; };

bq24150a: bq24150a@6b { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 0482676d18306..ce58b1f208e81 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -23,9 +23,9 @@ };

vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; };

vdd33a: regulator-vdd33a { @@ -84,28 +84,28 @@

uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ - OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ - OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ - OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ + OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ >; };

uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ - OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ - OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ - OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; };

uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ - OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ - OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; };

@@ -205,22 +205,22 @@ };

&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; };

&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; };

&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; };

&uart4 { - status = "disabled"; + status = "disabled"; };

&usb_otg_hs { diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi index 4d7eeb133dadd..801b4f10350c1 100644 --- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi @@ -13,20 +13,20 @@ cpu_thermal: cpu_thermal { polling-delay = <1000>; /* milliseconds */

/* sensor ID */ - thermal-sensors = <&bandgap 0>; + thermal-sensors = <&bandgap 0>;

cpu_trips: trips { - cpu_alert0: cpu_alert { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <125000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; + cpu_alert0: cpu_alert { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <125000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + };

cpu_cooling_maps: cooling-maps { map0 { diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index e62ea8b6d53fd..af288d63a26a4 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -84,36 +84,36 @@ };

lcd0: display { - compatible = "startek,startek-kd050c", "panel-dpi"; - label = "lcd"; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_pins>; - - enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; - - panel-timing { - clock-frequency = <33000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <43>; - vback-porch = <29>; - vfront-porch = <13>; - vsync-len = <3>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_lcd_out>; - }; - }; - }; + compatible = "startek,startek-kd050c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <43>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + }; + }; + };

hdmi0: connector0 { compatible = "hdmi-connector"; @@ -644,8 +644,8 @@ };

&usb3 { - extcon = <&extcon_usb3>; - vbus-supply = <&smps10_out1_reg>; + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; };

&cpu0 {