From: Aditya Kumar Singh quic_adisi@quicinc.com
[ Upstream commit 3ff51d7416ee1ea2d771051a0ffa1ec8be054768 ]
Currently, ath11k sends peer assoc command for each peer to firmware when bandwidth changes. Peer assoc command is a bulky command and if many clients are connected, this could lead to firmware buffer getting overflowed leading to a firmware assert.
However, during bandwidth change, only phymode and bandwidth also can be updated by WMI set peer param command. This makes the overall command light when compared to peer assoc and for multi-client cases, firmware buffer overflow also does not occur.
Remove sending peer assoc command during sta bandwidth change and instead add sending WMI set peer param command for phymode and bandwidth.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Fixes: f187fe8e3bc65 ("ath11k: fix firmware crash during channel switch") Signed-off-by: Aditya Kumar Singh quic_adisi@quicinc.com Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20221005095430.19890-1-quic_adisi@quicinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/core.h | 2 + drivers/net/wireless/ath/ath11k/mac.c | 122 +++++++++++++++++-------- 2 files changed, 87 insertions(+), 37 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h index b4aac98497cb..8edc1f4e5694 100644 --- a/drivers/net/wireless/ath/ath11k/core.h +++ b/drivers/net/wireless/ath/ath11k/core.h @@ -498,6 +498,8 @@ struct ath11k_sta {
bool use_4addr_set; u16 tcl_metadata; + + u32 bw_prev; };
#define ATH11K_MIN_5G_FREQ 4150 diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 7f6521314b2d..475ed20b495d 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -4209,10 +4209,11 @@ static void ath11k_sta_rc_update_wk(struct work_struct *wk) const u8 *ht_mcs_mask; const u16 *vht_mcs_mask; const u16 *he_mcs_mask; - u32 changed, bw, nss, smps; + u32 changed, bw, nss, smps, bw_prev; int err, num_vht_rates, num_he_rates; const struct cfg80211_bitrate_mask *mask; struct peer_assoc_params peer_arg; + enum wmi_phy_mode peer_phymode;
arsta = container_of(wk, struct ath11k_sta, update_wk); sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv); @@ -4233,6 +4234,7 @@ static void ath11k_sta_rc_update_wk(struct work_struct *wk) arsta->changed = 0;
bw = arsta->bw; + bw_prev = arsta->bw_prev; nss = arsta->nss; smps = arsta->smps;
@@ -4246,26 +4248,57 @@ static void ath11k_sta_rc_update_wk(struct work_struct *wk) ath11k_mac_max_he_nss(he_mcs_mask)));
if (changed & IEEE80211_RC_BW_CHANGED) { - /* Send peer assoc command before set peer bandwidth param to - * avoid the mismatch between the peer phymode and the peer - * bandwidth. - */ - ath11k_peer_assoc_prepare(ar, arvif->vif, sta, &peer_arg, true); - - peer_arg.is_assoc = false; - err = ath11k_wmi_send_peer_assoc_cmd(ar, &peer_arg); - if (err) { - ath11k_warn(ar->ab, "failed to send peer assoc for STA %pM vdev %i: %d\n", - sta->addr, arvif->vdev_id, err); - } else if (wait_for_completion_timeout(&ar->peer_assoc_done, 1 * HZ)) { + /* Get the peer phymode */ + ath11k_peer_assoc_h_phymode(ar, arvif->vif, sta, &peer_arg); + peer_phymode = peer_arg.peer_phymode; + + ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac update sta %pM peer bw %d phymode %d\n", + sta->addr, bw, peer_phymode); + + if (bw > bw_prev) { + /* BW is upgraded. In this case we send WMI_PEER_PHYMODE + * followed by WMI_PEER_CHWIDTH + */ + ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac BW upgrade for sta %pM new BW %d, old BW %d\n", + sta->addr, bw, bw_prev); + + err = ath11k_wmi_set_peer_param(ar, sta->addr, arvif->vdev_id, + WMI_PEER_PHYMODE, peer_phymode); + + if (err) { + ath11k_warn(ar->ab, "failed to update STA %pM peer phymode %d: %d\n", + sta->addr, peer_phymode, err); + goto err_rc_bw_changed; + } + err = ath11k_wmi_set_peer_param(ar, sta->addr, arvif->vdev_id, WMI_PEER_CHWIDTH, bw); + if (err) ath11k_warn(ar->ab, "failed to update STA %pM peer bw %d: %d\n", sta->addr, bw, err); } else { - ath11k_warn(ar->ab, "failed to get peer assoc conf event for %pM vdev %i\n", - sta->addr, arvif->vdev_id); + /* BW is downgraded. In this case we send WMI_PEER_CHWIDTH + * followed by WMI_PEER_PHYMODE + */ + ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac BW downgrade for sta %pM new BW %d,old BW %d\n", + sta->addr, bw, bw_prev); + + err = ath11k_wmi_set_peer_param(ar, sta->addr, arvif->vdev_id, + WMI_PEER_CHWIDTH, bw); + + if (err) { + ath11k_warn(ar->ab, "failed to update STA %pM peer bw %d: %d\n", + sta->addr, bw, err); + goto err_rc_bw_changed; + } + + err = ath11k_wmi_set_peer_param(ar, sta->addr, arvif->vdev_id, + WMI_PEER_PHYMODE, peer_phymode); + + if (err) + ath11k_warn(ar->ab, "failed to update STA %pM peer phymode %d: %d\n", + sta->addr, peer_phymode, err); } }
@@ -4346,6 +4379,7 @@ static void ath11k_sta_rc_update_wk(struct work_struct *wk) } }
+err_rc_bw_changed: mutex_unlock(&ar->conf_mutex); }
@@ -4499,6 +4533,34 @@ static int ath11k_mac_station_add(struct ath11k *ar, return ret; }
+static u32 ath11k_mac_ieee80211_sta_bw_to_wmi(struct ath11k *ar, + struct ieee80211_sta *sta) +{ + u32 bw = WMI_PEER_CHWIDTH_20MHZ; + + switch (sta->deflink.bandwidth) { + case IEEE80211_STA_RX_BW_20: + bw = WMI_PEER_CHWIDTH_20MHZ; + break; + case IEEE80211_STA_RX_BW_40: + bw = WMI_PEER_CHWIDTH_40MHZ; + break; + case IEEE80211_STA_RX_BW_80: + bw = WMI_PEER_CHWIDTH_80MHZ; + break; + case IEEE80211_STA_RX_BW_160: + bw = WMI_PEER_CHWIDTH_160MHZ; + break; + default: + ath11k_warn(ar->ab, "Invalid bandwidth %d for %pM\n", + sta->deflink.bandwidth, sta->addr); + bw = WMI_PEER_CHWIDTH_20MHZ; + break; + } + + return bw; +} + static int ath11k_mac_op_sta_state(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, @@ -4583,6 +4645,12 @@ static int ath11k_mac_op_sta_state(struct ieee80211_hw *hw, if (ret) ath11k_warn(ar->ab, "Failed to associate station: %pM\n", sta->addr); + + spin_lock_bh(&ar->data_lock); + /* Set arsta bw and prev bw */ + arsta->bw = ath11k_mac_ieee80211_sta_bw_to_wmi(ar, sta); + arsta->bw_prev = arsta->bw; + spin_unlock_bh(&ar->data_lock); } else if (old_state == IEEE80211_STA_ASSOC && new_state == IEEE80211_STA_AUTHORIZED) { spin_lock_bh(&ar->ab->base_lock); @@ -4706,28 +4774,8 @@ static void ath11k_mac_op_sta_rc_update(struct ieee80211_hw *hw, spin_lock_bh(&ar->data_lock);
if (changed & IEEE80211_RC_BW_CHANGED) { - bw = WMI_PEER_CHWIDTH_20MHZ; - - switch (sta->deflink.bandwidth) { - case IEEE80211_STA_RX_BW_20: - bw = WMI_PEER_CHWIDTH_20MHZ; - break; - case IEEE80211_STA_RX_BW_40: - bw = WMI_PEER_CHWIDTH_40MHZ; - break; - case IEEE80211_STA_RX_BW_80: - bw = WMI_PEER_CHWIDTH_80MHZ; - break; - case IEEE80211_STA_RX_BW_160: - bw = WMI_PEER_CHWIDTH_160MHZ; - break; - default: - ath11k_warn(ar->ab, "Invalid bandwidth %d in rc update for %pM\n", - sta->deflink.bandwidth, sta->addr); - bw = WMI_PEER_CHWIDTH_20MHZ; - break; - } - + bw = ath11k_mac_ieee80211_sta_bw_to_wmi(ar, sta); + arsta->bw_prev = arsta->bw; arsta->bw = bw; }