commit 3f77f244d8ec28e3a0a81240ffac7d626390060c upstream.
The v21 version of the NAND flash controller contains a Spare Area Size Register (SPAS) at offset 0x10. Its setting defaults to the maximum spare area size of 218 bytes. The size that is set in this register is used by the controller when it calculates the ECC bytes internally in hardware.
Usually, this register is updated from settings in the IIM fuses when the system is booting from NAND flash. For other boot media, however, the SPAS register remains at the default setting, which may not work for the particular flash chip on the board. The same goes for flash chips whose configuration cannot be set in the IIM fuses (e.g. chips with 2k sector size and 128 bytes spare area size can't be configured in the IIM fuses on imx25 systems).
Set the SPAS register explicitly during the preset operation. Derive the register value from mtd->oobsize that was detected during probe by decoding the flash chip's ID bytes.
While at it, rename the define for the spare area register's offset to NFC_V21_RSLTSPARE_AREA. The register at offset 0x10 on v1 controllers is different from the register on v21 controllers.
Fixes: d484018 ("mtd: mxc_nand: set NFC registers after reset") Cc: stable@vger.kernel.org Signed-off-by: Martin Kaiser martin@kaiser.cx Reviewed-by: Sascha Hauer s.hauer@pengutronix.de Reviewed-by: Miquel Raynal miquel.raynal@bootlin.com Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com --- Hello Greg,
the file that this patch modifies was renamed after 4.14. This patch uses the previous name. I tested it to apply to the 4.4, 4.9 and 4.14 stable branches. Could you add it to the queues again?
Thanks & best regards, Martin
drivers/mtd/nand/mxc_nand.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 45786e707b7b..26cef218bb43 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -48,7 +48,7 @@ #define NFC_V1_V2_CONFIG (host->regs + 0x0a) #define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c) #define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e) -#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10) +#define NFC_V21_RSLTSPARE_AREA (host->regs + 0x10) #define NFC_V1_V2_WRPROT (host->regs + 0x12) #define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14) #define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16) @@ -1274,6 +1274,9 @@ static void preset_v2(struct mtd_info *mtd) writew(config1, NFC_V1_V2_CONFIG1); /* preset operation */
+ /* spare area size in 16-bit half-words */ + writew(mtd->oobsize / 2, NFC_V21_RSLTSPARE_AREA); + /* Unlock the internal RAM Buffer */ writew(0x2, NFC_V1_V2_CONFIG);