On Thu, Dec 05, 2024 at 10:17:59AM -0500, Michael S. Tsirkin wrote:
On Thu, Dec 05, 2024 at 10:16:35PM +0900, Koichiro Den wrote:
On Thu, Dec 05, 2024 at 09:43:38PM +0900, Koichiro Den wrote:
On Thu, Dec 05, 2024 at 05:33:36AM -0500, Michael S. Tsirkin wrote:
On Wed, Dec 04, 2024 at 02:07:18PM +0900, Koichiro Den wrote:
When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1].
So it's a bugfix. Why net-next not net?
I was mistaken (I just read netdev-FAQ again). I'll resend to net, with adjustments reflecting your feedback.
Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash cases for virtio-net.
This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine.
netdev_tx_reset_queue() can actually be dropped from virtnet_open path; the device is not stopped in any case. For BQL core part, it's just like traffic nearly ceases to exist for some period. For stall detector added to BQL, even if virtnet_close could somehow lead to some TX completions delayed for long, followed by virtnet_open, we can just take it as stall as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector based on BQL"). Note also that users can still reset stall_max via sysfs.
So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This eliminates the BQL crashes. Note that netdev_tx_reset_queue() is now explicitly required in freeze/restore path, so this patch adds it to free_unused_bufs().
I don't much like that free_unused_bufs now has this side effect. I think would be better to just add a loop in virtnet_restore. Or if you want to keep it there, pls rename the function to hint it does more.
It makes sense. I would go for the former. Thanks.
Hmm, as Jacob pointed out in v1 (https://lore.kernel.org/all/20241202181445.0da50076@kernel.org/), it looks better to follow the rule of thumb.
OK then. I'm fine with keeping your code as is, just a squash, and add a comment
/* * Rule of thumb is netdev_tx_reset_queue() should follow any * skb freeing not followed by netdev_tx_completed_queue() */
Ok, thanks for the review!
Taking both suggestions from Jacob and you, adding a loop to remove_vq_common(), just after free_unused_bufs(), seems more fitting now, like this:
static void remove_vq_common(struct virtnet_info *vi) { + int i; + virtio_reset_device(vi->vdev);/* Free unused buffers in both send and recv, if any. */ free_unused_bufs(vi); + /* Tx unused buffers flushed, so reset BQL counter */ + for (i = 0; i < vi->max_queue_pairs; i++) + netdev_tx_reset_queue(netdev_get_tx_queue(vi->dev, i)); + free_receive_bufs(vi);
What do you think?
Thanks,
-Koichiro Den
[1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace:
<IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicast+0x23e/0x390 ? netlink_sendmsg+0x21e/0x490 ? ____sys_sendmsg+0x31b/0x350 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? __nla_validate_parse+0x5f/0xee0 ? __pfx___probestub_irq_enable+0x3/0x10 ? __create_object+0x5e/0x90 ? security_capable+0x3b/0x70 rtnl_newlink+0x784/0xaf0 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? stack_depot_save_flags+0x24/0x6d0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x34f/0x3f0 ? do_syscall_64+0x6c/0x180 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 netlink_unicast+0x23e/0x390 netlink_sendmsg+0x21e/0x490 ____sys_sendmsg+0x31b/0x350 ? copy_msghdr_from_user+0x6d/0xa0 ___sys_sendmsg+0x86/0xd0 ? __pte_offset_map+0x17/0x160 ? preempt_count_add+0x69/0xa0 ? __call_rcu_common.constprop.0+0x147/0x610 ? preempt_count_add+0x69/0xa0 ? preempt_count_add+0x69/0xa0 ? _raw_spin_trylock+0x13/0x60 ? trace_hardirqs_on+0x1d/0x80 __sys_sendmsg+0x66/0xc0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f41defe5b34 Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34 RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003 RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001 R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003 R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000 </TASK> [...] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits") Cc: stable@vger.kernel.org # v6.11+ Signed-off-by: Koichiro Den koichiro.den@canonical.com
drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 64c87bb48a41..48ce8b3881b6 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -3054,7 +3054,6 @@ static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index) if (err < 0) goto err_xdp_reg_mem_model;
- netdev_tx_reset_queue(netdev_get_tx_queue(vi->dev, qp_index)); virtnet_napi_enable(vi->rq[qp_index].vq, &vi->rq[qp_index].napi); virtnet_napi_tx_enable(vi, vi->sq[qp_index].vq, &vi->sq[qp_index].napi);
@@ -6243,6 +6242,7 @@ static void free_unused_bufs(struct virtnet_info *vi) struct virtqueue *vq = vi->sq[i].vq; while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) virtnet_sq_free_unused_buf(vq, buf);
netdev_tx_reset_queue(netdev_get_tx_queue(vi->dev, i));2.43.0