[PATCH 5.8 509/633] ARM: dts: stm32: Move ethernet PHY into DH SoM DT

From: Marek Vasut marex@denx.de

[ Upstream commit b0a07f609600b6fa4c30f783db50c38456804485 ]

The PHY and the VIO regulator is populated on the SoM, move it into the SoM DT.

Signed-off-by: Marek Vasut marex@denx.de Cc: Alexandre Torgue alexandre.torgue@st.com Cc: Maxime Coquelin mcoquelin.stm32@gmail.com Cc: Patrice Chotard patrice.chotard@st.com Cc: Patrick Delaunay patrick.delaunay@st.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue alexandre.torgue@st.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 33 ----------------- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 36 +++++++++++++++++++ 2 files changed, 36 insertions(+), 33 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 7c4bd615b3115..9cf6d90fbf69f 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -11,7 +11,6 @@ aliases { serial0 = &uart4; serial1 = &usart3; serial2 = &uart8; - ethernet0 = &ethernet0; };

chosen { @@ -33,16 +32,6 @@ display_bl: display-bl { status = "okay"; };

- ethernet_vio: vioregulator { - compatible = "regulator-fixed"; - regulator-name = "vio"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; - regulator-always-on; - regulator-boot-on; - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #size-cells = <0>; @@ -141,28 +130,6 @@ &cec { status = "okay"; };

-&ethernet0 { - status = "okay"; - pinctrl-0 = <&ethernet0_rmii_pins_a>; - pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rmii"; - max-speed = <100>; - phy-handle = <&phy0>; - st,eth-ref-clk-sel; - phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@1 { - reg = <1>; - }; - }; -}; - &i2c2 { /* Header X22 */ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index ba905196fb549..d30a3c60da9b0 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -9,6 +9,10 @@ #include <dt-bindings/mfd/st,stpmic1.h>

/ { + aliases { + ethernet0 = &ethernet0; + }; + memory@c0000000 { device_type = "memory"; reg = <0xC0000000 0x40000000>; @@ -55,6 +59,16 @@ retram: retram@38000000 { no-map; }; }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + }; };

&adc { @@ -94,6 +108,28 @@ &dts { status = "okay"; };

+&ethernet0 { + status = "okay"; + pinctrl-0 = <&ethernet0_rmii_pins_a>; + pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&phy0>; + st,eth-ref-clk-sel; + phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>;