From: Sriram R quic_srirrama@quicinc.com
[ Upstream commit 67a48d937fac917947540c9f89630d472cd61fcb ]
Currently, the logic used to select the 6 GHz band is incorrect, which may cause 6 GHz supported channels to not be updated properly. This is because the 6 GHz Max frequency supported by the driver is being compared to the Max frequency supported on the board. If in some cases, the 6 GHz Max frequency supported on the board is less than the defined 6 GHz Max frequency, all 6 GHz channels are disabled. To address this, compare the max frequency supported by the board to the defined 6 GHz Minimum frequency by the driver.
Similarly, when a dual mac card supports both 6 GHz and 5 GHz radios, if the 5 GHz radio gets enumerated first before 6 GHz, the checks in ath12k_mac_setup_channels_rates() can cause the 5 GHz channels which were enabled earlier to get disabled when the 6 GHz channel list is updated. This is because the Min 6 GHz frequency defined in the driver is 5945 MHz, which should be 5925 MHz since channel 2 is not considered currently, but the firmware can pass 5925 MHz as the minimum. Hence, update the Min frequency supported by the driver to 5925 MHz.
In addition, ensure that the channel list update to firmware updates only the channels that the current radio (ar) supports rather than considering the wiphy support. This would be required when multiple pdevs are supported in a wiphy and they support different ranges of frequencies or bands as in single wiphy support.
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R quic_srirrama@quicinc.com Acked-by: Jeff Johnson quic_jjohnson@quicinc.com Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://msgid.link/20240117062628.8260-1-quic_srirrama@quicinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath12k/core.h | 2 +- drivers/net/wireless/ath/ath12k/mac.c | 2 +- drivers/net/wireless/ath/ath12k/reg.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h index 8458dc292821a..01fb9b2ae4314 100644 --- a/drivers/net/wireless/ath/ath12k/core.h +++ b/drivers/net/wireless/ath/ath12k/core.h @@ -420,7 +420,7 @@ struct ath12k_sta { };
#define ATH12K_MIN_5G_FREQ 4150 -#define ATH12K_MIN_6G_FREQ 5945 +#define ATH12K_MIN_6G_FREQ 5925 #define ATH12K_MAX_6G_FREQ 7115 #define ATH12K_NUM_CHANS 100 #define ATH12K_MAX_5G_CHAN 173 diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index 88cec54c6c2e6..f4e5dc363472b 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -7198,7 +7198,7 @@ static int ath12k_mac_setup_channels_rates(struct ath12k *ar, }
if (supported_bands & WMI_HOST_WLAN_5G_CAP) { - if (reg_cap->high_5ghz_chan >= ATH12K_MAX_6G_FREQ) { + if (reg_cap->high_5ghz_chan >= ATH12K_MIN_6G_FREQ) { channels = kmemdup(ath12k_6ghz_channels, sizeof(ath12k_6ghz_channels), GFP_KERNEL); if (!channels) { diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c index f924bc13ccff5..29542c46b0941 100644 --- a/drivers/net/wireless/ath/ath12k/reg.c +++ b/drivers/net/wireless/ath/ath12k/reg.c @@ -103,7 +103,7 @@ int ath12k_reg_update_chan_list(struct ath12k *ar)
bands = hw->wiphy->bands; for (band = 0; band < NUM_NL80211_BANDS; band++) { - if (!bands[band]) + if (!(ar->mac.sbands[band].channels && bands[band])) continue;
for (i = 0; i < bands[band]->n_channels; i++) { @@ -129,7 +129,7 @@ int ath12k_reg_update_chan_list(struct ath12k *ar) ch = arg->channel;
for (band = 0; band < NUM_NL80211_BANDS; band++) { - if (!bands[band]) + if (!(ar->mac.sbands[band].channels && bands[band])) continue;
for (i = 0; i < bands[band]->n_channels; i++) {