From: Michal Simek michal.simek@xilinx.com
[ Upstream commit d1d4445abffb2b17e841d37b555b6f1364b571c1 ]
s/_/-/ for node names.
It fixes warnings like this: ... Warning (node_name_chars_strict): /cpu_opp_table: Character '_' not recommended in node name ...
Issues reported by make dtbs W=12
Signed-off-by: Michal Simek michal.simek@xilinx.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi | 4 ++-- arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 4 ++-- arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 10 +++++----- arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 +- arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 +- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++-- 6 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi index 9c09baca7dd78..306ad2157c988 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi @@ -58,13 +58,13 @@ clock-accuracy = <100>; };
- dpdma_clk: dpdma_clk { + dpdma_clk: dpdma-clk { compatible = "fixed-clock"; #clock-cells = <0x0>; clock-frequency = <533000000>; };
- drm_clock: drm_clock { + drm_clock: drm-clock { compatible = "fixed-clock"; #clock-cells = <0x0>; clock-frequency = <262750000>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index 8954c8c6f5475..14062b4535dd7 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -82,7 +82,7 @@ linux,default-trigger = "bluetooth-power"; };
- vbus_det { /* U5 USB5744 VBUS detection via MIO25 */ + vbus-det { /* U5 USB5744 VBUS detection via MIO25 */ label = "vbus_det"; gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -98,7 +98,7 @@ regulator-boot-on; };
- sdio_pwrseq: sdio_pwrseq { + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ post-power-on-delay-ms = <10>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 25dd574853235..d3b8e1a9c0761 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -53,7 +53,7 @@
leds { compatible = "gpio-leds"; - heartbeat_led { + heartbeat-led { label = "heartbeat"; gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -139,25 +139,25 @@ * 7, 10 - 17 - not connected */
- gtr_sel0 { + gtr-sel0 { gpio-hog; gpios = <0 0>; output-low; /* PCIE = 0, DP = 1 */ line-name = "sel0"; }; - gtr_sel1 { + gtr-sel1 { gpio-hog; gpios = <1 0>; output-high; /* PCIE = 0, DP = 1 */ line-name = "sel1"; }; - gtr_sel2 { + gtr-sel2 { gpio-hog; gpios = <2 0>; output-high; /* PCIE = 0, USB0 = 1 */ line-name = "sel2"; }; - gtr_sel3 { + gtr-sel3 { gpio-hog; gpios = <3 0>; output-high; /* PCIE = 0, SATA = 1 */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 259f21b0c0014..28dee4dad82c2 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -53,7 +53,7 @@
leds { compatible = "gpio-leds"; - heartbeat_led { + heartbeat-led { label = "heartbeat"; gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index a61b3cc6f4c95..47b5989035e4e 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -53,7 +53,7 @@
leds { compatible = "gpio-leds"; - heartbeat_led { + heartbeat-led { label = "heartbeat"; gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 29ce23422acf2..a516c0e01429a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -71,7 +71,7 @@ }; };
- cpu_opp_table: cpu_opp_table { + cpu_opp_table: cpu-opp-table { compatible = "operating-points-v2"; opp-shared; opp00 { @@ -124,7 +124,7 @@ <1 10 0xf08>; };
- amba_apu: amba_apu@0 { + amba_apu: amba-apu@0 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <1>;