From: Arınç ÜNAL arinc.unal@arinc9.com
[ Upstream commit 5bc148649cf358d0cccf525452a4efbd4bc89a0f ]
Fix the GB-PC2 devicetree. Refer to the schematics of the device for more information.
GB-PC2 devicetree fixes: - Include mt7621.dtsi instead of gbpc1.dts. Add the missing definitions. - Remove gpio-leds node as the system LED is not wired to anywhere on the board and the power LED is directly wired to GND. - Remove uart3 pin group from gpio-pinmux node as it's not used as GPIO. - Use reg 7 for the external phy to be on par with Documentation/devicetree/bindings/net/dsa/mt7530.txt. - Use the status value "okay".
Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1... Reviewed-by: Sergio Paracuellos sergio.paracuellos@gmail.com Signed-off-by: Arınç ÜNAL arinc.unal@arinc9.com Link: https://lore.kernel.org/r/20220311090320.3068-2-arinc.unal@arinc9.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/mt7621-dts/gbpc2.dts | 110 +++++++++++++++++++++++++-- 1 file changed, 102 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/mt7621-dts/gbpc2.dts b/drivers/staging/mt7621-dts/gbpc2.dts index 03d6bb6735ac..a7fce8de6147 100644 --- a/drivers/staging/mt7621-dts/gbpc2.dts +++ b/drivers/staging/mt7621-dts/gbpc2.dts @@ -1,28 +1,122 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /dts-v1/;
-#include "gbpc1.dts" +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h>
/ { compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc"; model = "GB-PC2"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x1c000000>, + <0x20000000 0x04000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + palmbus: palmbus@1e000000 { + i2c@900 { + status = "okay"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RESTART>; + }; + }; };
-&default_gpio { - groups = "wdt", "uart3"; - function = "gpio"; +&sdhci { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + broken-flash-reset; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: state-default { + gpio-pinmux { + groups = "wdt"; + function = "gpio"; + }; + }; };
ðernet { gmac1: mac@1 { - status = "ok"; - phy-handle = <&phy_external>; + status = "okay"; + phy-handle = <ðphy7>; };
mdio-bus { - phy_external: ethernet-phy@5 { - reg = <5>; + ethphy7: ethernet-phy@7 { + reg = <7>; phy-mode = "rgmii-rxid"; }; }; }; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "ethblack"; + }; + + port@4 { + status = "okay"; + label = "ethblue"; + }; + }; +};