6.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Penkler dpenkler@gmail.com
[ Upstream commit 50a6ed0494bc082227c38f427b40731bca9bdf15 ]
Enable module name to be printed in pr_xxx and dev_xxx Use DRV_NAME defined as KBUILD_MODNAME instead of hard coded string in usb_driver struct.
Remove __func__ parameter in dev_dbg messages as this can be enabled with dynamic debug.
Remove __func__ parameter in dev_err messages as they are not needed. The module name is sufficient.
Change pr_info to dev_dbg where needed and remove the rest where possible.
Remove test and error messages for buffer over run in write and read_registers as these are just trying to catch bugs in the driver.
Remove agilent_82357a string prefix in error messages.
Return -EIO for too many reads in read_registers instead of continuing after printing an error message.
Change pr_warn to dev_warn.
Remove warning on calls for unsupported functionality.
Remove test and message for buffer overflow in agilent_82357_init and agilent_82357a_go_idle which are just checking for a driver bug. Use actual indeces in the array instead of i and then incrementing i so that the code is clear and there is no need to check for overflow or print a message.
Signed-off-by: Dave Penkler dpenkler@gmail.com Link: https://lore.kernel.org/r/20250214114708.28947-3-dpenkler@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Stable-dep-of: 8491e73a5223 ("staging: gpib: Fix Oops after disconnect in agilent usb") Signed-off-by: Sasha Levin sashal@kernel.org --- .../gpib/agilent_82357a/agilent_82357a.c | 359 +++++++----------- 1 file changed, 143 insertions(+), 216 deletions(-)
diff --git a/drivers/staging/gpib/agilent_82357a/agilent_82357a.c b/drivers/staging/gpib/agilent_82357a/agilent_82357a.c index 0d8d495d3dfc6..7a39056ebc886 100644 --- a/drivers/staging/gpib/agilent_82357a/agilent_82357a.c +++ b/drivers/staging/gpib/agilent_82357a/agilent_82357a.c @@ -7,6 +7,10 @@
#define _GNU_SOURCE
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#define dev_fmt pr_fmt +#define DRV_NAME KBUILD_MODNAME + #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> @@ -79,14 +83,12 @@ static int agilent_82357a_send_bulk_msg(struct agilent_82357a_priv *a_priv, void
retval = usb_submit_urb(a_priv->bulk_urb, GFP_KERNEL); if (retval) { - dev_err(&usb_dev->dev, "%s: failed to submit bulk out urb, retval=%i\n", - __func__, retval); + dev_err(&usb_dev->dev, "failed to submit bulk out urb, retval=%i\n", retval); mutex_unlock(&a_priv->bulk_alloc_lock); goto cleanup; } mutex_unlock(&a_priv->bulk_alloc_lock); if (down_interruptible(&context->complete)) { - dev_err(&usb_dev->dev, "%s: interrupted\n", __func__); retval = -ERESTARTSYS; goto cleanup; } @@ -149,14 +151,12 @@ static int agilent_82357a_receive_bulk_msg(struct agilent_82357a_priv *a_priv, v
retval = usb_submit_urb(a_priv->bulk_urb, GFP_KERNEL); if (retval) { - dev_err(&usb_dev->dev, "%s: failed to submit bulk out urb, retval=%i\n", - __func__, retval); + dev_err(&usb_dev->dev, "failed to submit bulk in urb, retval=%i\n", retval); mutex_unlock(&a_priv->bulk_alloc_lock); goto cleanup; } mutex_unlock(&a_priv->bulk_alloc_lock); if (down_interruptible(&context->complete)) { - dev_err(&usb_dev->dev, "%s: interrupted\n", __func__); retval = -ERESTARTSYS; goto cleanup; } @@ -205,7 +205,6 @@ static int agilent_82357a_receive_control_msg(struct agilent_82357a_priv *a_priv
static void agilent_82357a_dump_raw_block(const u8 *raw_data, int length) { - pr_info("hex block dump\n"); print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 8, 1, raw_data, length, true); }
@@ -225,7 +224,7 @@ static int agilent_82357a_write_registers(struct agilent_82357a_priv *a_priv, static const int max_writes = 31;
if (num_writes > max_writes) { - dev_err(&usb_dev->dev, "%s: bug! num_writes=%i too large\n", __func__, num_writes); + dev_err(&usb_dev->dev, "bug! num_writes=%i too large\n", num_writes); return -EIO; } out_data_length = num_writes * bytes_per_write + header_length; @@ -239,8 +238,7 @@ static int agilent_82357a_write_registers(struct agilent_82357a_priv *a_priv, out_data[i++] = writes[j].address; out_data[i++] = writes[j].value; } - if (i > out_data_length) - dev_err(&usb_dev->dev, "%s: bug! buffer overrun\n", __func__); + retval = mutex_lock_interruptible(&a_priv->bulk_transfer_lock); if (retval) { kfree(out_data); @@ -249,8 +247,8 @@ static int agilent_82357a_write_registers(struct agilent_82357a_priv *a_priv, retval = agilent_82357a_send_bulk_msg(a_priv, out_data, i, &bytes_written, 1000); kfree(out_data); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_send_bulk_msg returned %i, bytes_written=%i, i=%i\n", - __func__, retval, bytes_written, i); + dev_err(&usb_dev->dev, "send_bulk_msg returned %i, bytes_written=%i, i=%i\n", + retval, bytes_written, i); mutex_unlock(&a_priv->bulk_transfer_lock); return retval; } @@ -265,20 +263,19 @@ static int agilent_82357a_write_registers(struct agilent_82357a_priv *a_priv, mutex_unlock(&a_priv->bulk_transfer_lock);
if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_receive_bulk_msg returned %i, bytes_read=%i\n", - __func__, retval, bytes_read); + dev_err(&usb_dev->dev, "receive_bulk_msg returned %i, bytes_read=%i\n", + retval, bytes_read); agilent_82357a_dump_raw_block(in_data, bytes_read); kfree(in_data); return -EIO; } if (in_data[0] != (0xff & ~DATA_PIPE_CMD_WR_REGS)) { - dev_err(&usb_dev->dev, "%s: error, bulk command=0x%x != ~DATA_PIPE_CMD_WR_REGS\n", - __func__, in_data[0]); + dev_err(&usb_dev->dev, "bulk command=0x%x != ~DATA_PIPE_CMD_WR_REGS\n", in_data[0]); return -EIO; } if (in_data[1]) { - dev_err(&usb_dev->dev, "%s: nonzero error code 0x%x in DATA_PIPE_CMD_WR_REGS response\n", - __func__, in_data[1]); + dev_err(&usb_dev->dev, "nonzero error code 0x%x in DATA_PIPE_CMD_WR_REGS response\n", + in_data[1]); return -EIO; } kfree(in_data); @@ -299,9 +296,10 @@ static int agilent_82357a_read_registers(struct agilent_82357a_priv *a_priv, static const int header_length = 2; static const int max_reads = 62;
- if (num_reads > max_reads) - dev_err(&usb_dev->dev, "%s: bug! num_reads=%i too large\n", __func__, num_reads); - + if (num_reads > max_reads) { + dev_err(&usb_dev->dev, "bug! num_reads=%i too large\n", num_reads); + return -EIO; + } out_data_length = num_reads + header_length; out_data = kmalloc(out_data_length, GFP_KERNEL); if (!out_data) @@ -311,8 +309,7 @@ static int agilent_82357a_read_registers(struct agilent_82357a_priv *a_priv, out_data[i++] = num_reads; for (j = 0; j < num_reads; j++) out_data[i++] = reads[j].address; - if (i > out_data_length) - dev_err(&usb_dev->dev, "%s: bug! buffer overrun\n", __func__); + if (blocking) { retval = mutex_lock_interruptible(&a_priv->bulk_transfer_lock); if (retval) { @@ -329,8 +326,8 @@ static int agilent_82357a_read_registers(struct agilent_82357a_priv *a_priv, retval = agilent_82357a_send_bulk_msg(a_priv, out_data, i, &bytes_written, 1000); kfree(out_data); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_send_bulk_msg returned %i, bytes_written=%i, i=%i\n", - __func__, retval, bytes_written, i); + dev_err(&usb_dev->dev, "send_bulk_msg returned %i, bytes_written=%i, i=%i\n", + retval, bytes_written, i); mutex_unlock(&a_priv->bulk_transfer_lock); return retval; } @@ -345,21 +342,20 @@ static int agilent_82357a_read_registers(struct agilent_82357a_priv *a_priv, mutex_unlock(&a_priv->bulk_transfer_lock);
if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_receive_bulk_msg returned %i, bytes_read=%i\n", - __func__, retval, bytes_read); + dev_err(&usb_dev->dev, "receive_bulk_msg returned %i, bytes_read=%i\n", + retval, bytes_read); agilent_82357a_dump_raw_block(in_data, bytes_read); kfree(in_data); return -EIO; } i = 0; if (in_data[i++] != (0xff & ~DATA_PIPE_CMD_RD_REGS)) { - dev_err(&usb_dev->dev, "%s: error, bulk command=0x%x != ~DATA_PIPE_CMD_RD_REGS\n", - __func__, in_data[0]); + dev_err(&usb_dev->dev, "bulk command=0x%x != ~DATA_PIPE_CMD_RD_REGS\n", in_data[0]); return -EIO; } if (in_data[i++]) { - dev_err(&usb_dev->dev, "%s: nonzero error code 0x%x in DATA_PIPE_CMD_RD_REGS response\n", - __func__, in_data[1]); + dev_err(&usb_dev->dev, "nonzero error code 0x%x in DATA_PIPE_CMD_RD_REGS response\n", + in_data[1]); return -EIO; } for (j = 0; j < num_reads; j++) @@ -390,14 +386,13 @@ static int agilent_82357a_abort(struct agilent_82357a_priv *a_priv, int flush) wIndex, status_data, status_data_len, 100); if (receive_control_retval < 0) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_receive_control_msg() returned %i\n", - __func__, receive_control_retval); + dev_err(&usb_dev->dev, "82357a_receive_control_msg() returned %i\n", + receive_control_retval); retval = -EIO; goto cleanup; } if (status_data[0] != (~XFER_ABORT & 0xff)) { - dev_err(&usb_dev->dev, "%s: error, major code=0x%x != ~XFER_ABORT\n", - __func__, status_data[0]); + dev_err(&usb_dev->dev, "major code=0x%x != ~XFER_ABORT\n", status_data[0]); retval = -EIO; goto cleanup; } @@ -413,8 +408,7 @@ static int agilent_82357a_abort(struct agilent_82357a_priv *a_priv, int flush) fallthrough; case UGP_ERR_FLUSHING_ALREADY: default: - dev_err(&usb_dev->dev, "%s: abort returned error code=0x%x\n", - __func__, status_data[1]); + dev_err(&usb_dev->dev, "abort returned error code=0x%x\n", status_data[1]); retval = -EIO; break; } @@ -469,8 +463,8 @@ static int agilent_82357a_read(gpib_board_t *board, uint8_t *buffer, size_t leng retval = agilent_82357a_send_bulk_msg(a_priv, out_data, i, &bytes_written, msec_timeout); kfree(out_data); if (retval || bytes_written != i) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_send_bulk_msg returned %i, bytes_written=%i, i=%i\n", - __func__, retval, bytes_written, i); + dev_err(&usb_dev->dev, "send_bulk_msg returned %i, bytes_written=%i, i=%i\n", + retval, bytes_written, i); mutex_unlock(&a_priv->bulk_transfer_lock); if (retval < 0) return retval; @@ -501,19 +495,19 @@ static int agilent_82357a_read(gpib_board_t *board, uint8_t *buffer, size_t leng &extra_bytes_read, 100); bytes_read += extra_bytes_read; if (extra_bytes_retval) { - dev_err(&usb_dev->dev, "%s: extra_bytes_retval=%i, bytes_read=%i\n", - __func__, extra_bytes_retval, bytes_read); + dev_err(&usb_dev->dev, "extra_bytes_retval=%i, bytes_read=%i\n", + extra_bytes_retval, bytes_read); agilent_82357a_abort(a_priv, 0); } } else if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_receive_bulk_msg returned %i, bytes_read=%i\n", - __func__, retval, bytes_read); + dev_err(&usb_dev->dev, "receive_bulk_msg returned %i, bytes_read=%i\n", + retval, bytes_read); agilent_82357a_abort(a_priv, 0); } mutex_unlock(&a_priv->bulk_transfer_lock); if (bytes_read > length + 1) { bytes_read = length + 1; - pr_warn("%s: bytes_read > length? truncating", __func__); + dev_warn(&usb_dev->dev, "bytes_read > length? truncating"); }
if (bytes_read >= 1) { @@ -584,8 +578,8 @@ static ssize_t agilent_82357a_generic_write(gpib_board_t *board, uint8_t *buffer kfree(out_data); if (retval || raw_bytes_written != i) { agilent_82357a_abort(a_priv, 0); - dev_err(&usb_dev->dev, "%s: agilent_82357a_send_bulk_msg returned %i, raw_bytes_written=%i, i=%i\n", - __func__, retval, raw_bytes_written, i); + dev_err(&usb_dev->dev, "send_bulk_msg returned %i, raw_bytes_written=%i, i=%i\n", + retval, raw_bytes_written, i); mutex_unlock(&a_priv->bulk_transfer_lock); if (retval < 0) return retval; @@ -597,7 +591,7 @@ static ssize_t agilent_82357a_generic_write(gpib_board_t *board, uint8_t *buffer &a_priv->interrupt_flags) || test_bit(TIMO_NUM, &board->status)); if (retval) { - dev_err(&usb_dev->dev, "%s: wait write complete interrupted\n", __func__); + dev_dbg(&usb_dev->dev, "wait write complete interrupted\n"); agilent_82357a_abort(a_priv, 0); mutex_unlock(&a_priv->bulk_transfer_lock); return -ERESTARTSYS; @@ -614,8 +608,7 @@ static ssize_t agilent_82357a_generic_write(gpib_board_t *board, uint8_t *buffer read_reg.address = BSR; retval = agilent_82357a_read_registers(a_priv, &read_reg, 1, 1); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "read_registers() returned error\n"); return -ETIMEDOUT; }
@@ -632,8 +625,7 @@ static ssize_t agilent_82357a_generic_write(gpib_board_t *board, uint8_t *buffer read_reg.address = ADSR; retval = agilent_82357a_read_registers(a_priv, &read_reg, 1, 1); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "read_registers() returned error\n"); return -ETIMEDOUT; } adsr = read_reg.value; @@ -659,8 +651,7 @@ static ssize_t agilent_82357a_generic_write(gpib_board_t *board, uint8_t *buffer 100); mutex_unlock(&a_priv->bulk_transfer_lock); if (retval < 0) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_receive_control_msg() returned %i\n", - __func__, retval); + dev_err(&usb_dev->dev, "receive_control_msg() returned %i\n", retval); kfree(status_data); return -EIO; } @@ -699,8 +690,7 @@ int agilent_82357a_take_control_internal(gpib_board_t *board, int synchronous) write.value = AUX_TCA; retval = agilent_82357a_write_registers(a_priv, &write, 1); if (retval) - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n");
return retval; } @@ -741,8 +731,7 @@ static int agilent_82357a_go_to_standby(gpib_board_t *board) write.value = AUX_GTS; retval = agilent_82357a_write_registers(a_priv, &write, 1); if (retval) - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n"); return 0; }
@@ -771,8 +760,7 @@ static void agilent_82357a_request_system_control(gpib_board_t *board, int reque ++i; retval = agilent_82357a_write_registers(a_priv, writes, i); if (retval) - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n"); return;// retval; }
@@ -791,8 +779,7 @@ static void agilent_82357a_interface_clear(gpib_board_t *board, int assert) } retval = agilent_82357a_write_registers(a_priv, &write, 1); if (retval) - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n"); }
static void agilent_82357a_remote_enable(gpib_board_t *board, int enable) @@ -808,8 +795,7 @@ static void agilent_82357a_remote_enable(gpib_board_t *board, int enable) write.value |= AUX_CS; retval = agilent_82357a_write_registers(a_priv, &write, 1); if (retval) - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n"); a_priv->ren_state = enable; return;// 0; } @@ -818,10 +804,9 @@ static int agilent_82357a_enable_eos(gpib_board_t *board, uint8_t eos_byte, int { struct agilent_82357a_priv *a_priv = board->private_data;
- if (compare_8_bits == 0) { - pr_warn("%s: hardware only supports 8-bit EOS compare", __func__); + if (compare_8_bits == 0) return -EOPNOTSUPP; - } + a_priv->eos_char = eos_byte; a_priv->eos_mode = REOS | BIN; return 0; @@ -850,8 +835,7 @@ static unsigned int agilent_82357a_update_status(gpib_board_t *board, unsigned i retval = agilent_82357a_read_registers(a_priv, &address_status, 1, 0); if (retval) { if (retval != -EAGAIN) - dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "read_registers() returned error\n"); return board->status; } // check for remote/local @@ -883,8 +867,7 @@ static unsigned int agilent_82357a_update_status(gpib_board_t *board, unsigned i retval = agilent_82357a_read_registers(a_priv, &bus_status, 1, 0); if (retval) { if (retval != -EAGAIN) - dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "read_registers() returned error\n"); return board->status; } if (bus_status.value & BSR_SRQ_BIT) @@ -907,8 +890,7 @@ static int agilent_82357a_primary_address(gpib_board_t *board, unsigned int addr write.value = address & ADDRESS_MASK; retval = agilent_82357a_write_registers(a_priv, &write, 1); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n"); return retval; } return retval; @@ -917,8 +899,8 @@ static int agilent_82357a_primary_address(gpib_board_t *board, unsigned int addr static int agilent_82357a_secondary_address(gpib_board_t *board, unsigned int address, int enable) { if (enable) - pr_warn("%s: warning: assigning a secondary address not supported\n", __func__); - return -EOPNOTSUPP; + return -EOPNOTSUPP; + return 0; }
static int agilent_82357a_parallel_poll(gpib_board_t *board, uint8_t *result) @@ -936,16 +918,14 @@ static int agilent_82357a_parallel_poll(gpib_board_t *board, uint8_t *result) writes[1].value = a_priv->hw_control_bits & ~NOT_PARALLEL_POLL; retval = agilent_82357a_write_registers(a_priv, writes, 2); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n"); return retval; } udelay(2); //silly, since usb write will take way longer read.address = CPTR; retval = agilent_82357a_read_registers(a_priv, &read, 1, 1); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "read_registers() returned error\n"); return retval; } *result = read.value; @@ -956,8 +936,7 @@ static int agilent_82357a_parallel_poll(gpib_board_t *board, uint8_t *result) writes[1].value = AUX_RPP; retval = agilent_82357a_write_registers(a_priv, writes, 2); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n"); return retval; } return 0; @@ -1005,8 +984,7 @@ static int agilent_82357a_line_status(const gpib_board_t *board) retval = agilent_82357a_read_registers(a_priv, &bus_status, 1, 0); if (retval) { if (retval != -EAGAIN) - dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "read_registers() returned error\n"); return retval; } if (bus_status.value & BSR_REN_BIT) @@ -1055,8 +1033,7 @@ static unsigned int agilent_82357a_t1_delay(gpib_board_t *board, unsigned int na write.value = nanosec_to_fast_talker_bits(&nanosec); retval = agilent_82357a_write_registers(a_priv, &write, 1); if (retval) - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n"); return nanosec; }
@@ -1081,7 +1058,7 @@ static void agilent_82357a_interrupt_complete(struct urb *urb) default: /* other error, resubmit */ retval = usb_submit_urb(a_priv->interrupt_urb, GFP_ATOMIC); if (retval) - dev_err(&usb_dev->dev, "%s: failed to resubmit interrupt urb\n", __func__); + dev_err(&usb_dev->dev, "failed to resubmit interrupt urb\n"); return; }
@@ -1097,7 +1074,7 @@ static void agilent_82357a_interrupt_complete(struct urb *urb)
retval = usb_submit_urb(a_priv->interrupt_urb, GFP_ATOMIC); if (retval) - dev_err(&usb_dev->dev, "%s: failed to resubmit interrupt urb\n", __func__); + dev_err(&usb_dev->dev, "failed to resubmit interrupt urb\n"); }
static int agilent_82357a_setup_urbs(gpib_board_t *board) @@ -1133,8 +1110,7 @@ static int agilent_82357a_setup_urbs(gpib_board_t *board) if (retval) { usb_free_urb(a_priv->interrupt_urb); a_priv->interrupt_urb = NULL; - dev_err(&usb_dev->dev, "%s: failed to submit first interrupt urb, retval=%i\n", - __func__, retval); + dev_err(&usb_dev->dev, "failed to submit first interrupt urb, retval=%i\n", retval); goto setup_exit; } mutex_unlock(&a_priv->interrupt_alloc_lock); @@ -1184,108 +1160,78 @@ static void agilent_82357a_free_private(gpib_board_t *board) { kfree(board->private_data); board->private_data = NULL; - }
+#define INIT_NUM_REG_WRITES 18 static int agilent_82357a_init(gpib_board_t *board) { struct agilent_82357a_priv *a_priv = board->private_data; struct usb_device *usb_dev = interface_to_usbdev(a_priv->bus_interface); struct agilent_82357a_register_pairlet hw_control; - struct agilent_82357a_register_pairlet writes[0x20]; + struct agilent_82357a_register_pairlet writes[INIT_NUM_REG_WRITES]; int retval; - int i; unsigned int nanosec;
- i = 0; - writes[i].address = LED_CONTROL; - writes[i].value = FAIL_LED_ON; - ++i; - writes[i].address = RESET_TO_POWERUP; - writes[i].value = RESET_SPACEBALL; - ++i; - retval = agilent_82357a_write_registers(a_priv, writes, i); + writes[0].address = LED_CONTROL; + writes[0].value = FAIL_LED_ON; + writes[1].address = RESET_TO_POWERUP; + writes[1].value = RESET_SPACEBALL; + retval = agilent_82357a_write_registers(a_priv, writes, 2); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n"); return -EIO; } set_current_state(TASK_INTERRUPTIBLE); if (schedule_timeout(usec_to_jiffies(2000))) return -ERESTARTSYS; - i = 0; - writes[i].address = AUXCR; - writes[i].value = AUX_NBAF; - ++i; - writes[i].address = AUXCR; - writes[i].value = AUX_HLDE; - ++i; - writes[i].address = AUXCR; - writes[i].value = AUX_TON; - ++i; - writes[i].address = AUXCR; - writes[i].value = AUX_LON; - ++i; - writes[i].address = AUXCR; - writes[i].value = AUX_RSV2; - ++i; - writes[i].address = AUXCR; - writes[i].value = AUX_INVAL; - ++i; - writes[i].address = AUXCR; - writes[i].value = AUX_RPP; - ++i; - writes[i].address = AUXCR; - writes[i].value = AUX_STDL; - ++i; - writes[i].address = AUXCR; - writes[i].value = AUX_VSTDL; - ++i; - writes[i].address = FAST_TALKER_T1; + writes[0].address = AUXCR; + writes[0].value = AUX_NBAF; + writes[1].address = AUXCR; + writes[1].value = AUX_HLDE; + writes[2].address = AUXCR; + writes[2].value = AUX_TON; + writes[3].address = AUXCR; + writes[3].value = AUX_LON; + writes[4].address = AUXCR; + writes[4].value = AUX_RSV2; + writes[5].address = AUXCR; + writes[5].value = AUX_INVAL; + writes[6].address = AUXCR; + writes[6].value = AUX_RPP; + writes[7].address = AUXCR; + writes[7].value = AUX_STDL; + writes[8].address = AUXCR; + writes[8].value = AUX_VSTDL; + writes[9].address = FAST_TALKER_T1; nanosec = board->t1_nano_sec; - writes[i].value = nanosec_to_fast_talker_bits(&nanosec); + writes[9].value = nanosec_to_fast_talker_bits(&nanosec); board->t1_nano_sec = nanosec; - ++i; - writes[i].address = ADR; - writes[i].value = board->pad & ADDRESS_MASK; - ++i; - writes[i].address = PPR; - writes[i].value = 0; - ++i; - writes[i].address = SPMR; - writes[i].value = 0; - ++i; - writes[i].address = PROTOCOL_CONTROL; - writes[i].value = WRITE_COMPLETE_INTERRUPT_EN; - ++i; - writes[i].address = IMR0; - writes[i].value = HR_BOIE | HR_BIIE; - ++i; - writes[i].address = IMR1; - writes[i].value = HR_SRQIE; - ++i; + writes[10].address = ADR; + writes[10].value = board->pad & ADDRESS_MASK; + writes[11].address = PPR; + writes[11].value = 0; + writes[12].address = SPMR; + writes[12].value = 0; + writes[13].address = PROTOCOL_CONTROL; + writes[13].value = WRITE_COMPLETE_INTERRUPT_EN; + writes[14].address = IMR0; + writes[14].value = HR_BOIE | HR_BIIE; + writes[15].address = IMR1; + writes[15].value = HR_SRQIE; // turn off reset state - writes[i].address = AUXCR; - writes[i].value = AUX_CHIP_RESET; - ++i; - writes[i].address = LED_CONTROL; - writes[i].value = FIRMWARE_LED_CONTROL; - ++i; - if (i > ARRAY_SIZE(writes)) { - dev_err(&usb_dev->dev, "%s: bug! writes[] overflow\n", __func__); - return -EFAULT; - } - retval = agilent_82357a_write_registers(a_priv, writes, i); + writes[16].address = AUXCR; + writes[16].value = AUX_CHIP_RESET; + writes[17].address = LED_CONTROL; + writes[17].value = FIRMWARE_LED_CONTROL; + retval = agilent_82357a_write_registers(a_priv, writes, INIT_NUM_REG_WRITES); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n"); return -EIO; } hw_control.address = HW_CONTROL; retval = agilent_82357a_read_registers(a_priv, &hw_control, 1, 1); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_read_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "read_registers() returned error\n"); return -EIO; } a_priv->hw_control_bits = (hw_control.value & ~0x7) | NOT_TI_RESET | NOT_PARALLEL_POLL; @@ -1336,7 +1282,7 @@ static int agilent_82357a_attach(gpib_board_t *board, const gpib_board_config_t } if (i == MAX_NUM_82357A_INTERFACES) { dev_err(board->gpib_dev, - "No Agilent 82357 gpib adapters found, have you loaded its firmware?\n"); + "No supported adapters found, have you loaded its firmware?\n"); retval = -ENODEV; goto attach_fail; } @@ -1372,8 +1318,7 @@ static int agilent_82357a_attach(gpib_board_t *board, const gpib_board_config_t goto attach_fail; }
- dev_info(&usb_dev->dev, - "bus %d dev num %d attached to gpib minor %d, agilent usb interface %i\n", + dev_info(&usb_dev->dev, "bus %d dev num %d attached to gpib%d, interface %i\n", usb_dev->bus->busnum, usb_dev->devnum, board->minor, i); mutex_unlock(&agilent_82357a_hotplug_lock); return retval; @@ -1390,37 +1335,24 @@ static int agilent_82357a_go_idle(gpib_board_t *board) struct usb_device *usb_dev = interface_to_usbdev(a_priv->bus_interface); struct agilent_82357a_register_pairlet writes[0x20]; int retval; - int i;
- i = 0; // turn on tms9914 reset state - writes[i].address = AUXCR; - writes[i].value = AUX_CS | AUX_CHIP_RESET; - ++i; + writes[0].address = AUXCR; + writes[0].value = AUX_CS | AUX_CHIP_RESET; a_priv->hw_control_bits &= ~NOT_TI_RESET; - writes[i].address = HW_CONTROL; - writes[i].value = a_priv->hw_control_bits; - ++i; - writes[i].address = PROTOCOL_CONTROL; - writes[i].value = 0; - ++i; - writes[i].address = IMR0; - writes[i].value = 0; - ++i; - writes[i].address = IMR1; - writes[i].value = 0; - ++i; - writes[i].address = LED_CONTROL; - writes[i].value = 0; - ++i; - if (i > ARRAY_SIZE(writes)) { - dev_err(&usb_dev->dev, "%s: bug! writes[] overflow\n", __func__); - return -EFAULT; - } - retval = agilent_82357a_write_registers(a_priv, writes, i); + writes[1].address = HW_CONTROL; + writes[1].value = a_priv->hw_control_bits; + writes[2].address = PROTOCOL_CONTROL; + writes[2].value = 0; + writes[3].address = IMR0; + writes[3].value = 0; + writes[4].address = IMR1; + writes[4].value = 0; + writes[5].address = LED_CONTROL; + writes[5].value = 0; + retval = agilent_82357a_write_registers(a_priv, writes, 6); if (retval) { - dev_err(&usb_dev->dev, "%s: agilent_82357a_write_registers() returned error\n", - __func__); + dev_err(&usb_dev->dev, "write_registers() returned error\n"); return -EIO; } return 0; @@ -1445,7 +1377,6 @@ static void agilent_82357a_detach(gpib_board_t *board) agilent_82357a_release_urbs(a_priv); agilent_82357a_free_private(board); } - dev_info(board->gpib_dev, "%s: detached\n", __func__); mutex_unlock(&agilent_82357a_hotplug_lock); }
@@ -1510,8 +1441,7 @@ static int agilent_82357a_driver_probe(struct usb_interface *interface, if (i == MAX_NUM_82357A_INTERFACES) { usb_put_dev(usb_dev); mutex_unlock(&agilent_82357a_hotplug_lock); - dev_err(&usb_dev->dev, "%s: out of space in agilent_82357a_driver_interfaces[]\n", - __func__); + dev_err(&usb_dev->dev, "out of space in agilent_82357a_driver_interfaces[]\n"); return -1; } path = kmalloc(path_length, GFP_KERNEL); @@ -1552,13 +1482,12 @@ static void agilent_82357a_driver_disconnect(struct usb_interface *interface) mutex_unlock(&a_priv->control_alloc_lock); } } - dev_dbg(&usb_dev->dev, "nulled agilent_82357a_driver_interfaces[%i]\n", i); agilent_82357a_driver_interfaces[i] = NULL; break; } } if (i == MAX_NUM_82357A_INTERFACES) - dev_err(&usb_dev->dev, "unable to find interface in agilent_82357a_driver_interfaces[]? bug?\n"); + dev_err(&usb_dev->dev, "unable to find interface - bug?\n"); usb_put_dev(usb_dev);
mutex_unlock(&agilent_82357a_hotplug_lock); @@ -1583,18 +1512,18 @@ static int agilent_82357a_driver_suspend(struct usb_interface *interface, pm_mes agilent_82357a_abort(a_priv, 0); retval = agilent_82357a_go_idle(board); if (retval) { - dev_err(&usb_dev->dev, "%s: failed to go idle, retval=%i\n", - __func__, retval); + dev_err(&usb_dev->dev, "failed to go idle, retval=%i\n", + retval); mutex_unlock(&agilent_82357a_hotplug_lock); return retval; } mutex_lock(&a_priv->interrupt_alloc_lock); agilent_82357a_cleanup_urbs(a_priv); mutex_unlock(&a_priv->interrupt_alloc_lock); - dev_info(&usb_dev->dev, - "bus %d dev num %d gpib minor %d, agilent usb interface %i suspended\n", - usb_dev->bus->busnum, usb_dev->devnum, - board->minor, i); + dev_dbg(&usb_dev->dev, + "bus %d dev num %d gpib %d, interface %i suspended\n", + usb_dev->bus->busnum, usb_dev->devnum, + board->minor, i); } } break; @@ -1631,8 +1560,8 @@ static int agilent_82357a_driver_resume(struct usb_interface *interface) mutex_lock(&a_priv->interrupt_alloc_lock); retval = usb_submit_urb(a_priv->interrupt_urb, GFP_KERNEL); if (retval) { - dev_err(&usb_dev->dev, "%s: failed to resubmit interrupt urb, retval=%i\n", - __func__, retval); + dev_err(&usb_dev->dev, "failed to resubmit interrupt urb in resume, retval=%i\n", + retval); mutex_unlock(&a_priv->interrupt_alloc_lock); mutex_unlock(&agilent_82357a_hotplug_lock); return retval; @@ -1655,9 +1584,9 @@ static int agilent_82357a_driver_resume(struct usb_interface *interface) // assert/unassert REN agilent_82357a_remote_enable(board, a_priv->ren_state);
- dev_info(&usb_dev->dev, - "bus %d dev num %d gpib minor %d, agilent usb interface %i resumed\n", - usb_dev->bus->busnum, usb_dev->devnum, board->minor, i); + dev_dbg(&usb_dev->dev, + "bus %d dev num %d gpib%d, interface %i resumed\n", + usb_dev->bus->busnum, usb_dev->devnum, board->minor, i); }
resume_exit: @@ -1667,7 +1596,7 @@ static int agilent_82357a_driver_resume(struct usb_interface *interface) }
static struct usb_driver agilent_82357a_bus_driver = { - .name = "agilent_82357a_gpib", + .name = DRV_NAME, .probe = agilent_82357a_driver_probe, .disconnect = agilent_82357a_driver_disconnect, .suspend = agilent_82357a_driver_suspend, @@ -1680,19 +1609,18 @@ static int __init agilent_82357a_init_module(void) int i; int ret;
- pr_info("agilent_82357a_gpib driver loading"); for (i = 0; i < MAX_NUM_82357A_INTERFACES; ++i) agilent_82357a_driver_interfaces[i] = NULL;
ret = usb_register(&agilent_82357a_bus_driver); if (ret) { - pr_err("agilent_82357a: usb_register failed: error = %d\n", ret); + pr_err("usb_register failed: error = %d\n", ret); return ret; }
ret = gpib_register_driver(&agilent_82357a_gpib_interface, THIS_MODULE); if (ret) { - pr_err("agilent_82357a: gpib_register_driver failed: error = %d\n", ret); + pr_err("gpib_register_driver failed: error = %d\n", ret); usb_deregister(&agilent_82357a_bus_driver); return ret; } @@ -1702,7 +1630,6 @@ static int __init agilent_82357a_init_module(void)
static void __exit agilent_82357a_exit_module(void) { - pr_info("agilent_82357a_gpib driver unloading"); gpib_unregister_driver(&agilent_82357a_gpib_interface); usb_deregister(&agilent_82357a_bus_driver); }