From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit 0fa86fc2e28227f1e64f13867e73cf864c6d25ad ]
When GPIO library asks pin control to set the bias, it doesn't pass any value of it and argument is considered boolean (and this is true for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual drivers must behave well, when they got the resistance value of 1 Ohm, i.e. transforming it to sane default.
In case of Intel Merrifield pin control hardware the 20 kOhm sounds plausible because it gives a good trade off between weakness and minimization of leakage current (will be only 50 uA with the above choice).
Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Depends-on: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Acked-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/intel/pinctrl-merrifield.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c index 4fa69f988c7b7..6b2312e73f23f 100644 --- a/drivers/pinctrl/intel/pinctrl-merrifield.c +++ b/drivers/pinctrl/intel/pinctrl-merrifield.c @@ -729,6 +729,10 @@ static int mrfld_config_set_pin(struct mrfld_pinctrl *mp, unsigned int pin, mask |= BUFCFG_Px_EN_MASK | BUFCFG_PUPD_VAL_MASK; bits |= BUFCFG_PU_EN;
+ /* Set default strength value in case none is given */ + if (arg == 1) + arg = 20000; + switch (arg) { case 50000: bits |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT; @@ -749,6 +753,10 @@ static int mrfld_config_set_pin(struct mrfld_pinctrl *mp, unsigned int pin, mask |= BUFCFG_Px_EN_MASK | BUFCFG_PUPD_VAL_MASK; bits |= BUFCFG_PD_EN;
+ /* Set default strength value in case none is given */ + if (arg == 1) + arg = 20000; + switch (arg) { case 50000: bits |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT;