From: Jiri Olsa jolsa@redhat.com
[ Upstream commit 94aafb74cee0002e2f2eb6dc5376f54d5951ab4d ]
Michael reported that he could not stat following event:
$ perf stat -e unc_p_freq_ge_1200mhz_cycles -a -- ls event syntax error: '..e_1200mhz_cycles' ___ value too big for format, maximum is 255 Run 'perf list' for a list of valid events
The event is unwrapped into:
uncore_pcu/event=0xb,filter_band0=1200/
where filter_band0 format says it's one byte only:
# cat uncore_pcu/format/filter_band0 config1:0-7
while JSON files specifies bigger number:
"Filter": "filter_band0=1200",
all the filter_band* formats show 1 byte width:
# cat uncore_pcu/format/filter_band1 config1:8-15 # cat uncore_pcu/format/filter_band2 config1:16-23 # cat uncore_pcu/format/filter_band3 config1:24-31
The reason of the issue is that filter_band* values are supposed to be in 100Mhz units.. it's stated in the JSON help for the events, like:
filter_band3=XXX, with XXX in 100Mhz units
This patch divides the filter_band* values by 100, plus there's couple of changes that actually change the number completely, like:
- "Filter": "edge=1,filter_band2=4000", + "Filter": "edge=1,filter_band2=30",
Reported-by: Michael Petlan mpetlan@redhat.com Signed-off-by: Jiri Olsa jolsa@kernel.org Acked-by: Andi Kleen ak@linux.intel.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Kan Liang kan.liang@linux.intel.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Link: http://lkml.kernel.org/r/20181010080339.GB15790@krava Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../arch/x86/ivytown/uncore-power.json | 16 ++++++++-------- .../arch/x86/jaketown/uncore-power.json | 16 ++++++++-------- 2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json index d40498f2cb1e..635c09fda1d9 100644 --- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json +++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json @@ -188,7 +188,7 @@ "Counter": "0,1,2,3", "EventCode": "0xb", "EventName": "UNC_P_FREQ_GE_1200MHZ_CYCLES", - "Filter": "filter_band0=1200", + "Filter": "filter_band0=12", "MetricExpr": "(UNC_P_FREQ_GE_1200MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_1200mhz_cycles %", "PerPkg": "1", @@ -199,7 +199,7 @@ "Counter": "0,1,2,3", "EventCode": "0xc", "EventName": "UNC_P_FREQ_GE_2000MHZ_CYCLES", - "Filter": "filter_band1=2000", + "Filter": "filter_band1=20", "MetricExpr": "(UNC_P_FREQ_GE_2000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_2000mhz_cycles %", "PerPkg": "1", @@ -210,7 +210,7 @@ "Counter": "0,1,2,3", "EventCode": "0xd", "EventName": "UNC_P_FREQ_GE_3000MHZ_CYCLES", - "Filter": "filter_band2=3000", + "Filter": "filter_band2=30", "MetricExpr": "(UNC_P_FREQ_GE_3000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_3000mhz_cycles %", "PerPkg": "1", @@ -221,7 +221,7 @@ "Counter": "0,1,2,3", "EventCode": "0xe", "EventName": "UNC_P_FREQ_GE_4000MHZ_CYCLES", - "Filter": "filter_band3=4000", + "Filter": "filter_band3=40", "MetricExpr": "(UNC_P_FREQ_GE_4000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_4000mhz_cycles %", "PerPkg": "1", @@ -232,7 +232,7 @@ "Counter": "0,1,2,3", "EventCode": "0xb", "EventName": "UNC_P_FREQ_GE_1200MHZ_TRANSITIONS", - "Filter": "edge=1,filter_band0=1200", + "Filter": "edge=1,filter_band0=12", "MetricExpr": "(UNC_P_FREQ_GE_1200MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_1200mhz_cycles %", "PerPkg": "1", @@ -243,7 +243,7 @@ "Counter": "0,1,2,3", "EventCode": "0xc", "EventName": "UNC_P_FREQ_GE_2000MHZ_TRANSITIONS", - "Filter": "edge=1,filter_band1=2000", + "Filter": "edge=1,filter_band1=20", "MetricExpr": "(UNC_P_FREQ_GE_2000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_2000mhz_cycles %", "PerPkg": "1", @@ -254,7 +254,7 @@ "Counter": "0,1,2,3", "EventCode": "0xd", "EventName": "UNC_P_FREQ_GE_3000MHZ_TRANSITIONS", - "Filter": "edge=1,filter_band2=4000", + "Filter": "edge=1,filter_band2=30", "MetricExpr": "(UNC_P_FREQ_GE_3000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_3000mhz_cycles %", "PerPkg": "1", @@ -265,7 +265,7 @@ "Counter": "0,1,2,3", "EventCode": "0xe", "EventName": "UNC_P_FREQ_GE_4000MHZ_TRANSITIONS", - "Filter": "edge=1,filter_band3=4000", + "Filter": "edge=1,filter_band3=40", "MetricExpr": "(UNC_P_FREQ_GE_4000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_4000mhz_cycles %", "PerPkg": "1", diff --git a/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json b/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json index 16034bfd06dd..8755693d86c6 100644 --- a/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json +++ b/tools/perf/pmu-events/arch/x86/jaketown/uncore-power.json @@ -187,7 +187,7 @@ "Counter": "0,1,2,3", "EventCode": "0xb", "EventName": "UNC_P_FREQ_GE_1200MHZ_CYCLES", - "Filter": "filter_band0=1200", + "Filter": "filter_band0=12", "MetricExpr": "(UNC_P_FREQ_GE_1200MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_1200mhz_cycles %", "PerPkg": "1", @@ -198,7 +198,7 @@ "Counter": "0,1,2,3", "EventCode": "0xc", "EventName": "UNC_P_FREQ_GE_2000MHZ_CYCLES", - "Filter": "filter_band1=2000", + "Filter": "filter_band1=20", "MetricExpr": "(UNC_P_FREQ_GE_2000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_2000mhz_cycles %", "PerPkg": "1", @@ -209,7 +209,7 @@ "Counter": "0,1,2,3", "EventCode": "0xd", "EventName": "UNC_P_FREQ_GE_3000MHZ_CYCLES", - "Filter": "filter_band2=3000", + "Filter": "filter_band2=30", "MetricExpr": "(UNC_P_FREQ_GE_3000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_3000mhz_cycles %", "PerPkg": "1", @@ -220,7 +220,7 @@ "Counter": "0,1,2,3", "EventCode": "0xe", "EventName": "UNC_P_FREQ_GE_4000MHZ_CYCLES", - "Filter": "filter_band3=4000", + "Filter": "filter_band3=40", "MetricExpr": "(UNC_P_FREQ_GE_4000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_4000mhz_cycles %", "PerPkg": "1", @@ -231,7 +231,7 @@ "Counter": "0,1,2,3", "EventCode": "0xb", "EventName": "UNC_P_FREQ_GE_1200MHZ_TRANSITIONS", - "Filter": "edge=1,filter_band0=1200", + "Filter": "edge=1,filter_band0=12", "MetricExpr": "(UNC_P_FREQ_GE_1200MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_1200mhz_cycles %", "PerPkg": "1", @@ -242,7 +242,7 @@ "Counter": "0,1,2,3", "EventCode": "0xc", "EventName": "UNC_P_FREQ_GE_2000MHZ_TRANSITIONS", - "Filter": "edge=1,filter_band1=2000", + "Filter": "edge=1,filter_band1=20", "MetricExpr": "(UNC_P_FREQ_GE_2000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_2000mhz_cycles %", "PerPkg": "1", @@ -253,7 +253,7 @@ "Counter": "0,1,2,3", "EventCode": "0xd", "EventName": "UNC_P_FREQ_GE_3000MHZ_TRANSITIONS", - "Filter": "edge=1,filter_band2=4000", + "Filter": "edge=1,filter_band2=30", "MetricExpr": "(UNC_P_FREQ_GE_3000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_3000mhz_cycles %", "PerPkg": "1", @@ -264,7 +264,7 @@ "Counter": "0,1,2,3", "EventCode": "0xe", "EventName": "UNC_P_FREQ_GE_4000MHZ_TRANSITIONS", - "Filter": "edge=1,filter_band3=4000", + "Filter": "edge=1,filter_band3=40", "MetricExpr": "(UNC_P_FREQ_GE_4000MHZ_CYCLES / UNC_P_CLOCKTICKS) * 100.", "MetricName": "freq_ge_4000mhz_cycles %", "PerPkg": "1",