From: Alexandre Torgue alexandre.torgue@foss.st.com
[ Upstream commit 4bf4abe19089245b7b12f35e5cafb5477b3e2c48 ]
On some STM32 MP15 boards, stpmic node is not correct which generates warnings running "make dtbs_check W=1" command. Issues are:
-"regulator-active-discharge" is not a boolean but an uint32. -"regulator-over-current-protection" is not a valid entry for vref_ddr. -LDO4 has a fixed voltage (3v3) so min/max entries are not allowed.
Signed-off-by: Alexandre Torgue alexandre.torgue@foss.st.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/stm32mp157a-stinger96.dtsi | 7 ++----- arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi | 5 +---- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 5 +---- arch/arm/boot/dts/stm32mp15xx-osd32.dtsi | 7 ++----- 4 files changed, 6 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi index 58275bcf9e26..4dd138d691c7 100644 --- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi +++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi @@ -184,8 +184,6 @@
vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; };
@@ -208,7 +206,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; };
bst_out: boost { @@ -219,13 +216,13 @@ vbus_otg: pwr_sw1 { regulator-name = "vbus_otg"; interrupts = <IT_OCP_OTG 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; };
vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; };
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi index b5601d270c8f..2d9461006810 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi @@ -173,8 +173,6 @@
vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; };
@@ -197,7 +195,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; };
bst_out: boost { @@ -213,7 +210,7 @@ vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; };
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index c43c5c93f8eb..8221bf69fefe 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -234,8 +234,6 @@
vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; };
@@ -257,7 +255,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; };
bst_out: boost { @@ -273,7 +270,7 @@ vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; };
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi index 713485a95795..6706d8311a66 100644 --- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi @@ -146,8 +146,6 @@
vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; };
@@ -171,7 +169,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; };
bst_out: boost { @@ -182,13 +179,13 @@ vbus_otg: pwr_sw1 { regulator-name = "vbus_otg"; interrupts = <IT_OCP_OTG 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; };
vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; };