On Wed, Oct 25, 2023 at 12:05:49PM +0200, Ulf Hansson wrote:
On Tue, 24 Oct 2023 at 18:25, Stephan Gerhold stephan@gerhold.net wrote:
On Tue, Oct 24, 2023 at 06:11:34PM +0200, Ulf Hansson wrote:
On Tue, 24 Oct 2023 at 15:07, Stephan Gerhold stephan.gerhold@kernkonzept.com wrote:
On Tue, Oct 24, 2023 at 02:49:32PM +0200, Ulf Hansson wrote:
On Tue, 24 Oct 2023 at 14:03, Stephan Gerhold stephan.gerhold@kernkonzept.com wrote:
On Thu, Oct 19, 2023 at 01:26:19PM +0200, Ulf Hansson wrote: > On Thu, 19 Oct 2023 at 12:24, Ulf Hansson ulf.hansson@linaro.org wrote: > > On Wed, 18 Oct 2023 at 10:06, Stephan Gerhold > > stephan.gerhold@kernkonzept.com wrote: > > > > > > The genpd core caches performance state votes from devices that are > > > runtime suspended as of commit 3c5a272202c2 ("PM: domains: Improve > > > runtime PM performance state handling"). They get applied once the > > > device becomes active again. > > > > > > To attach the power domains needed by qcom-cpufreq-nvmem the OPP core > > > calls genpd_dev_pm_attach_by_id(). This results in "virtual" dummy > > > devices that use runtime PM only to control the enable and performance > > > state for the attached power domain. > > > > > > However, at the moment nothing ever resumes the virtual devices created > > > for qcom-cpufreq-nvmem. They remain permanently runtime suspended. This > > > means that performance state votes made during cpufreq scaling get > > > always cached and never applied to the hardware. > > > > > > Fix this by enabling the devices after attaching them and use > > > dev_pm_syscore_device() to ensure the power domains also stay on when > > > going to suspend. Since it supplies the CPU we can never turn it off > > > from Linux. There are other mechanisms to turn it off when needed, > > > usually in the RPM firmware (RPMPD) or the cpuidle path (CPR genpd). > > > > I believe we discussed using dev_pm_syscore_device() for the previous > > version. It's not intended to be used for things like the above. > > > > Moreover, I was under the impression that it wasn't really needed. In > > fact, I would think that this actually breaks things for system > > suspend/resume, as in this case the cpr driver's genpd > > ->power_on|off() callbacks are no longer getting called due this, > > which means that the cpr state machine isn't going to be restored > > properly. Or did I get this wrong? > > BTW, if you really need something like the above, the proper way to do > it would instead be to call device_set_awake_path() for the device. >
Unfortunately this does not work correctly. When I use device_set_awake_path() it does set dev->power.wakeup_path = true. However, this flag is cleared again in device_prepare() when entering suspend. To me it looks a bit like wakeup_path is not supposed to be set directly by drivers? Before and after your commit 8512220c5782 ("PM / core: Assign the wakeup_path status flag in __device_prepare()") it seems to be internally bound to device_may_wakeup().
It works if I make device_may_wakeup() return true, with
device_set_wakeup_capable(dev, true); device_wakeup_enable(dev);but that also allows *disabling* the wakeup from sysfs which doesn't really make sense for the CPU.
Any ideas?
The device_set_awake_path() should be called from a system suspend callback. So you need to add that callback for the cpufreq driver.
Sorry, if that wasn't clear.
Hmm, but at the moment I'm calling this on the virtual genpd devices. How would it work for them? I don't have a suspend callback for them.
I guess could loop over the virtual devices in the cpufreq driver suspend callback, but is my driver suspend callback really guaranteed to run before the device_prepare() that clears "wakeup_path" on the virtual devices?
Yes, that's guaranteed. dpm_prepare() (which calls device_prepare()) is always being executed before dpm_suspend().
Thanks, I think I understand. Maybe. :-)
Just to confirm, I should call device_set_awake_path() for the virtual genpd devices as part of the PM ->suspend() callback? And this will be guaranteed to run after the "prepare" phase but before the "suspend_noirq" phase where the genpd core will check the wakeup flag?
Correct!
Thanks, this seems to works as intended! The diff I tested is below, in case you already have some comments.
I'll put this into proper patches and will send a v3 after the merge window.
Stephan
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c index 7e9202080c98..e0c82c958018 100644 --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c @@ -23,6 +23,7 @@ #include <linux/nvmem-consumer.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/pm.h> #include <linux/pm_domain.h> #include <linux/pm_opp.h> #include <linux/pm_runtime.h> @@ -426,6 +427,18 @@ static const struct qcom_cpufreq_match_data match_data_ipq8074 = { .get_version = qcom_cpufreq_ipq8074_name_version, };
+static void qcom_cpufreq_suspend_virt_devs(struct qcom_cpufreq_drv *drv, unsigned cpu) +{ + const char * const *name = drv->data->genpd_names; + int i; + + if (!drv->cpus[cpu].virt_devs) + return; + + for (i = 0; *name; i++, name++) + device_set_awake_path(drv->cpus[cpu].virt_devs[i]); +} + static void qcom_cpufreq_put_virt_devs(struct qcom_cpufreq_drv *drv, unsigned cpu) { const char * const *name = drv->data->genpd_names; @@ -542,9 +555,6 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
goto free_opp; } - - /* Keep CPU power domain always-on */ - dev_pm_syscore_device(virt_devs[i], true); } drv->cpus[cpu].virt_devs = virt_devs; } @@ -581,11 +591,25 @@ static void qcom_cpufreq_remove(struct platform_device *pdev) } }
+static int qcom_cpufreq_suspend(struct device *dev) +{ + struct qcom_cpufreq_drv *drv = dev_get_drvdata(dev); + unsigned int cpu; + + for_each_possible_cpu(cpu) + qcom_cpufreq_suspend_virt_devs(drv, cpu); + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(qcom_cpufreq_pm_ops, qcom_cpufreq_suspend, NULL); + static struct platform_driver qcom_cpufreq_driver = { .probe = qcom_cpufreq_probe, .remove_new = qcom_cpufreq_remove, .driver = { .name = "qcom-cpufreq-nvmem", + .pm = pm_sleep_ptr(&qcom_cpufreq_pm_ops), }, };
diff --git a/drivers/pmdomain/qcom/rpmpd.c b/drivers/pmdomain/qcom/rpmpd.c index abb62e4a2bdf..0f91e00b5909 100644 --- a/drivers/pmdomain/qcom/rpmpd.c +++ b/drivers/pmdomain/qcom/rpmpd.c @@ -1050,6 +1050,7 @@ static int rpmpd_probe(struct platform_device *pdev) rpmpds[i]->pd.power_off = rpmpd_power_off; rpmpds[i]->pd.power_on = rpmpd_power_on; rpmpds[i]->pd.set_performance_state = rpmpd_set_performance; + rpmpds[i]->pd.flags = GENPD_FLAG_ACTIVE_WAKEUP; pm_genpd_init(&rpmpds[i]->pd, NULL, true);
data->domains[i] = &rpmpds[i]->pd;