4.17-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steffen Maier maier@linux.ibm.com
commit d70aab55924b44f213fec2b900b095430b33eec6 upstream.
For problem determination we always want to see when we were invoked on the terminate_rport_io callback whether we perform something or not.
Temporal event sequence of interest with a long fast_io_fail_tmo of 27 sec:
loose remote port
t workqueue [s] zfcp_q_<dev> IRQ zfcperp<dev>
=== ================== =================== ============================
0 recv RSCN q p.test_link_work block rport start fast_io_fail_tmo send ADISC ELS 4 recv ADISC fail block zfcp_port port forced reopen send open port 12 recv open port fail q p.gid_pn_work zfcp_erp_wakeup (zfcp_erp_wait would return) GID_PN fail
Before this point, we got a SCSI trace with tag "sctrpi1" on fast_io_fail, e.g. with the typical 5 sec setting.
port.status |= ERP_FAILED
If fast_io_fail_tmo triggers after this point, we missed a SCSI trace.
workqueue fc_dl_<host> ================== 27 fc_timeout_fail_rport_io fc_terminate_rport_io zfcp_scsi_terminate_rport_io zfcp_erp_port_forced_reopen _zfcp_erp_port_forced_reopen if (port.status & ERP_FAILED) return;
Therefore, write a trace before above early return.
Example trace record formatted with zfcpdbf from s390-tools:
Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : sctrpi1 SCSI terminate rport I/O LUN : 0xffffffffffffffff none (invalid) WWPN : 0x<wwpn> D_ID : 0x<n_port_id> Adapter status : 0x... Port status : 0x... LUN status : 0x00000000 none (invalid) Ready count : 0x... Running count : 0x... ERP want : 0x03 ZFCP_ERP_ACTION_REOPEN_PORT_FORCED ERP need : 0xe0 ZFCP_ERP_ACTION_FAILED
Signed-off-by: Steffen Maier maier@linux.ibm.com Cc: stable@vger.kernel.org #2.6.38+ Reviewed-by: Benjamin Block bblock@linux.ibm.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/s390/scsi/zfcp_erp.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
--- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -42,9 +42,13 @@ enum zfcp_erp_steps { * @ZFCP_ERP_ACTION_REOPEN_PORT_FORCED: Forced port recovery. * @ZFCP_ERP_ACTION_REOPEN_ADAPTER: Adapter recovery. * @ZFCP_ERP_ACTION_NONE: Eyecatcher pseudo flag to bitwise or-combine with - * either of the other enum values. + * either of the first four enum values. * Used to indicate that an ERP action could not be * set up despite a detected need for some recovery. + * @ZFCP_ERP_ACTION_FAILED: Eyecatcher pseudo flag to bitwise or-combine with + * either of the first four enum values. + * Used to indicate that ERP not needed because + * the object has ZFCP_STATUS_COMMON_ERP_FAILED. */ enum zfcp_erp_act_type { ZFCP_ERP_ACTION_REOPEN_LUN = 1, @@ -52,6 +56,7 @@ enum zfcp_erp_act_type { ZFCP_ERP_ACTION_REOPEN_PORT_FORCED = 3, ZFCP_ERP_ACTION_REOPEN_ADAPTER = 4, ZFCP_ERP_ACTION_NONE = 0xc0, + ZFCP_ERP_ACTION_FAILED = 0xe0, };
enum zfcp_erp_act_state { @@ -379,8 +384,12 @@ static void _zfcp_erp_port_forced_reopen zfcp_erp_port_block(port, clear); zfcp_scsi_schedule_rport_block(port);
- if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_ERP_FAILED) + if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_ERP_FAILED) { + zfcp_dbf_rec_trig(id, port->adapter, port, NULL, + ZFCP_ERP_ACTION_REOPEN_PORT_FORCED, + ZFCP_ERP_ACTION_FAILED); return; + }
zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_PORT_FORCED, port->adapter, port, NULL, id, 0);