From: Okan Sahin okan.sahin@analog.com
[ Upstream commit af71cccadecedad3484c2208e2c4fc8eff927d4a ]
Regulator driver for MAX77857/59 and MAX77831. The MAX77857 is a high-efficiency, high-performance buck-boost converter targeted for systems requiring a wide input voltage range (2.5V to 16V).
The MAX77859 is high-Efficiency Buck-Boost Converter for USB-PD/PPS Applications. It has wide input range (2.5V to 22V)
The MAX77831 is a high-efficiency, high-performance buck-boost converter targeted for systems requiring wide input voltage range (2.5V to 16V).
Signed-off-by: Okan Sahin okan.sahin@analog.com Link: https://lore.kernel.org/r/20230717050736.10075-3-okan.sahin@analog.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/max77857-regulator.c | 459 +++++++++++++++++++++++++ 3 files changed, 470 insertions(+) create mode 100644 drivers/regulator/max77857-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index e5f3613c15fa5..09eaa1cd90de7 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -573,6 +573,16 @@ config REGULATOR_MAX77650 Semiconductor. This device has a SIMO with three independent power rails and an LDO.
+config REGULATOR_MAX77857 + tristate "ADI MAX77857/MAX77831 regulator support" + depends on I2C + select REGMAP_I2C + help + This driver controls a ADI MAX77857 and MAX77831 regulators. + via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost + converters with input voltage range (2.5V to 16V). Say Y here to + enable the regulator driver + config REGULATOR_MAX8649 tristate "Maxim 8649 voltage regulator" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 58dfe0147cd43..e7230846b6804 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -85,6 +85,7 @@ obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o +obj-$(CONFIG_REGULATOR_MAX77857) += max77857-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o diff --git a/drivers/regulator/max77857-regulator.c b/drivers/regulator/max77857-regulator.c new file mode 100644 index 0000000000000..c5482ffd606ec --- /dev/null +++ b/drivers/regulator/max77857-regulator.c @@ -0,0 +1,459 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2023 Analog Devices, Inc. + * ADI Regulator driver for the MAX77857 + * MAX77859 and MAX77831. + */ +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/util_macros.h> + +#define MAX77857_REG_INT_SRC 0x10 +#define MAX77857_REG_INT_MASK 0x11 +#define MAX77857_REG_CONT1 0x12 +#define MAX77857_REG_CONT2 0x13 +#define MAX77857_REG_CONT3 0x14 + +#define MAX77857_INT_SRC_OCP BIT(0) +#define MAX77857_INT_SRC_THS BIT(1) +#define MAX77857_INT_SRC_HARDSHORT BIT(2) +#define MAX77857_INT_SRC_OVP BIT(3) +#define MAX77857_INT_SRC_POK BIT(4) + +#define MAX77857_ILIM_MASK GENMASK(2, 0) +#define MAX77857_CONT1_FREQ GENMASK(4, 3) +#define MAX77857_CONT3_FPWM BIT(5) + +#define MAX77859_REG_INT_SRC 0x11 +#define MAX77859_REG_CONT1 0x13 +#define MAX77859_REG_CONT2 0x14 +#define MAX77859_REG_CONT3 0x15 +#define MAX77859_REG_CONT5 0x17 +#define MAX77859_CONT2_FPWM BIT(2) +#define MAX77859_CONT2_INTB BIT(3) +#define MAX77859_CONT3_DVS_START BIT(2) +#define MAX77859_VOLTAGE_SEL_MASK GENMASK(9, 0) + +#define MAX77859_CURRENT_MIN 1000000 +#define MAX77859_CURRENT_MAX 5000000 +#define MAX77859_CURRENT_STEP 50000 + +enum max77857_id { + ID_MAX77831 = 1, + ID_MAX77857, + ID_MAX77859, + ID_MAX77859A, +}; + +static bool max77857_volatile_reg(struct device *dev, unsigned int reg) +{ + enum max77857_id id = (enum max77857_id)dev_get_drvdata(dev); + + switch (id) { + case ID_MAX77831: + case ID_MAX77857: + return reg == MAX77857_REG_INT_SRC; + case ID_MAX77859: + case ID_MAX77859A: + return reg == MAX77859_REG_INT_SRC; + default: + return true; + } +} + +struct regmap_config max77857_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_MAPLE, + .volatile_reg = max77857_volatile_reg, +}; + +static int max77857_get_status(struct regulator_dev *rdev) +{ + unsigned int val; + int ret; + + ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val); + if (ret) + return ret; + + if (FIELD_GET(MAX77857_INT_SRC_POK, val)) + return REGULATOR_STATUS_ON; + + return REGULATOR_STATUS_ERROR; +} + +static unsigned int max77857_get_mode(struct regulator_dev *rdev) +{ + enum max77857_id id = (enum max77857_id)rdev_get_drvdata(rdev); + unsigned int regval; + int ret; + + switch (id) { + case ID_MAX77831: + case ID_MAX77857: + ret = regmap_read(rdev->regmap, MAX77857_REG_CONT3, ®val); + if (ret) + return ret; + + if (FIELD_GET(MAX77857_CONT3_FPWM, regval)) + return REGULATOR_MODE_FAST; + + break; + case ID_MAX77859: + case ID_MAX77859A: + ret = regmap_read(rdev->regmap, MAX77859_REG_CONT2, ®val); + if (ret) + return ret; + + if (FIELD_GET(MAX77859_CONT2_FPWM, regval)) + return REGULATOR_MODE_FAST; + + break; + default: + return -EINVAL; + } + + return REGULATOR_MODE_NORMAL; +} + +static int max77857_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + enum max77857_id id = (enum max77857_id)rdev_get_drvdata(rdev); + unsigned int reg, val; + + switch (id) { + case ID_MAX77831: + case ID_MAX77857: + reg = MAX77857_REG_CONT3; + val = MAX77857_CONT3_FPWM; + break; + case ID_MAX77859: + case ID_MAX77859A: + reg = MAX77859_REG_CONT2; + val = MAX77859_CONT2_FPWM; + break; + default: + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_FAST: + return regmap_set_bits(rdev->regmap, reg, val); + case REGULATOR_MODE_NORMAL: + return regmap_clear_bits(rdev->regmap, reg, val); + default: + return -EINVAL; + } +} + +static int max77857_get_error_flags(struct regulator_dev *rdev, + unsigned int *flags) +{ + unsigned int val; + int ret; + + ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val); + if (ret) + return ret; + + *flags = 0; + + if (FIELD_GET(MAX77857_INT_SRC_OVP, val)) + *flags |= REGULATOR_ERROR_OVER_VOLTAGE_WARN; + + if (FIELD_GET(MAX77857_INT_SRC_OCP, val) || + FIELD_GET(MAX77857_INT_SRC_HARDSHORT, val)) + *flags |= REGULATOR_ERROR_OVER_CURRENT; + + if (FIELD_GET(MAX77857_INT_SRC_THS, val)) + *flags |= REGULATOR_ERROR_OVER_TEMP; + + if (!FIELD_GET(MAX77857_INT_SRC_POK, val)) + *flags |= REGULATOR_ERROR_FAIL; + + return 0; +} + +static struct linear_range max77859_lin_ranges[] = { + REGULATOR_LINEAR_RANGE(3200000, 0x0A0, 0x320, 20000) +}; + +static const unsigned int max77859_ramp_table[4] = { + 1000, 500, 250, 125 +}; + +static int max77859_set_voltage_sel(struct regulator_dev *rdev, + unsigned int sel) +{ + __be16 reg; + int ret; + + reg = cpu_to_be16(sel); + + ret = regmap_bulk_write(rdev->regmap, MAX77859_REG_CONT3, ®, 2); + if (ret) + return ret; + + /* actually apply new voltage */ + return regmap_set_bits(rdev->regmap, MAX77859_REG_CONT3, + MAX77859_CONT3_DVS_START); +} + +int max77859_get_voltage_sel(struct regulator_dev *rdev) +{ + __be16 reg; + int ret; + + ret = regmap_bulk_read(rdev->regmap, MAX77859_REG_CONT3, ®, 2); + if (ret) + return ret; + + return FIELD_GET(MAX77859_VOLTAGE_SEL_MASK, __be16_to_cpu(reg)); +} + +int max77859_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA) +{ + u32 selector; + + if (max_uA < MAX77859_CURRENT_MIN) + return -EINVAL; + + selector = 0x12 + (max_uA - MAX77859_CURRENT_MIN) / MAX77859_CURRENT_STEP; + + selector = clamp_val(selector, 0x00, 0x7F); + + return regmap_write(rdev->regmap, MAX77859_REG_CONT5, selector); +} + +int max77859_get_current_limit(struct regulator_dev *rdev) +{ + u32 selector; + int ret; + + ret = regmap_read(rdev->regmap, MAX77859_REG_CONT5, &selector); + if (ret) + return ret; + + if (selector <= 0x12) + return MAX77859_CURRENT_MIN; + + if (selector >= 0x64) + return MAX77859_CURRENT_MAX; + + return MAX77859_CURRENT_MIN + (selector - 0x12) * MAX77859_CURRENT_STEP; +} + +static const struct regulator_ops max77859_regulator_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = max77859_set_voltage_sel, + .get_voltage_sel = max77859_get_voltage_sel, + .set_ramp_delay = regulator_set_ramp_delay_regmap, + .get_status = max77857_get_status, + .set_mode = max77857_set_mode, + .get_mode = max77857_get_mode, + .get_error_flags = max77857_get_error_flags, +}; + +static const struct regulator_ops max77859a_regulator_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = max77859_set_voltage_sel, + .get_voltage_sel = max77859_get_voltage_sel, + .set_current_limit = max77859_set_current_limit, + .get_current_limit = max77859_get_current_limit, + .set_ramp_delay = regulator_set_ramp_delay_regmap, + .get_status = max77857_get_status, + .set_mode = max77857_set_mode, + .get_mode = max77857_get_mode, + .get_error_flags = max77857_get_error_flags, +}; + +static const struct regulator_ops max77857_regulator_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_ramp_delay = regulator_set_ramp_delay_regmap, + .get_status = max77857_get_status, + .set_mode = max77857_set_mode, + .get_mode = max77857_get_mode, + .get_error_flags = max77857_get_error_flags, +}; + +static struct linear_range max77857_lin_ranges[] = { + REGULATOR_LINEAR_RANGE(4485000, 0x3D, 0xCC, 73500) +}; + +static const unsigned int max77857_switch_freq[] = { + 1200000, 1500000, 1800000, 2100000 +}; + +static const unsigned int max77857_ramp_table[2][4] = { + { 1333, 667, 333, 227 }, /* when switch freq is 1.8MHz or 2.1MHz */ + { 1166, 667, 333, 167 }, /* when switch freq is 1.2MHz or 1.5MHz */ +}; + +static struct regulator_desc max77857_regulator_desc = { + .ops = &max77857_regulator_ops, + .name = "max77857", + .linear_ranges = max77857_lin_ranges, + .n_linear_ranges = ARRAY_SIZE(max77857_lin_ranges), + .vsel_mask = 0xFF, + .vsel_reg = MAX77857_REG_CONT2, + .ramp_delay_table = max77857_ramp_table[0], + .n_ramp_values = ARRAY_SIZE(max77857_ramp_table[0]), + .ramp_reg = MAX77857_REG_CONT3, + .ramp_mask = GENMASK(1, 0), + .ramp_delay = max77857_ramp_table[0][0], + .owner = THIS_MODULE, +}; + +static void max77857_calc_range(struct device *dev, enum max77857_id id) +{ + struct linear_range *range; + unsigned long vref_step; + u32 rtop = 0; + u32 rbot = 0; + + device_property_read_u32(dev, "adi,rtop-ohms", &rtop); + device_property_read_u32(dev, "adi,rbot-ohms", &rbot); + + if (!rbot || !rtop) + return; + + switch (id) { + case ID_MAX77831: + case ID_MAX77857: + range = max77857_lin_ranges; + vref_step = 4900UL; + break; + case ID_MAX77859: + case ID_MAX77859A: + range = max77859_lin_ranges; + vref_step = 1250UL; + break; + } + + range->step = DIV_ROUND_CLOSEST(vref_step * (rbot + rtop), rbot); + range->min = range->step * range->min_sel; +} + +static int max77857_probe(struct i2c_client *client) +{ + const struct i2c_device_id *i2c_id; + struct device *dev = &client->dev; + struct regulator_config cfg = { }; + struct regulator_dev *rdev; + struct regmap *regmap; + enum max77857_id id; + u32 switch_freq = 0; + int ret; + + i2c_id = i2c_client_get_device_id(client); + if (!i2c_id) + return -EINVAL; + + id = i2c_id->driver_data; + + dev_set_drvdata(dev, (void *)id); + + if (id == ID_MAX77859 || id == ID_MAX77859A) { + max77857_regulator_desc.ops = &max77859_regulator_ops; + max77857_regulator_desc.linear_ranges = max77859_lin_ranges; + max77857_regulator_desc.ramp_delay_table = max77859_ramp_table; + max77857_regulator_desc.ramp_delay = max77859_ramp_table[0]; + } + + if (id == ID_MAX77859A) + max77857_regulator_desc.ops = &max77859a_regulator_ops; + + max77857_calc_range(dev, id); + + regmap = devm_regmap_init_i2c(client, &max77857_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "cannot initialize regmap\n"); + + device_property_read_u32(dev, "adi,switch-frequency-hz", &switch_freq); + if (switch_freq) { + switch_freq = find_closest(switch_freq, max77857_switch_freq, + ARRAY_SIZE(max77857_switch_freq)); + + if (id == ID_MAX77831 && switch_freq == 3) + switch_freq = 2; + + switch (id) { + case ID_MAX77831: + case ID_MAX77857: + ret = regmap_update_bits(regmap, MAX77857_REG_CONT1, + MAX77857_CONT1_FREQ, switch_freq); + + if (switch_freq >= 2) + break; + + max77857_regulator_desc.ramp_delay_table = max77857_ramp_table[1]; + max77857_regulator_desc.ramp_delay = max77857_ramp_table[1][0]; + break; + case ID_MAX77859: + case ID_MAX77859A: + ret = regmap_update_bits(regmap, MAX77859_REG_CONT1, + MAX77857_CONT1_FREQ, switch_freq); + break; + } + if (ret) + return ret; + } + + cfg.dev = dev; + cfg.driver_data = (void *)id; + cfg.regmap = regmap; + cfg.init_data = of_get_regulator_init_data(dev, dev->of_node, + &max77857_regulator_desc); + if (!cfg.init_data) + return -ENOMEM; + + rdev = devm_regulator_register(dev, &max77857_regulator_desc, &cfg); + if (IS_ERR(rdev)) + return dev_err_probe(dev, PTR_ERR(rdev), + "cannot register regulator\n"); + + return 0; +} + +const struct i2c_device_id max77857_id[] = { + { "max77831", ID_MAX77831 }, + { "max77857", ID_MAX77857 }, + { "max77859", ID_MAX77859 }, + { "max77859a", ID_MAX77859A }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max77857_id); + +static const struct of_device_id max77857_of_id[] = { + { .compatible = "adi,max77831", .data = (void *)ID_MAX77831 }, + { .compatible = "adi,max77857", .data = (void *)ID_MAX77857 }, + { .compatible = "adi,max77859", .data = (void *)ID_MAX77859 }, + { .compatible = "adi,max77859a", .data = (void *)ID_MAX77859A }, + { } +}; +MODULE_DEVICE_TABLE(of, max77857_of_id); + +struct i2c_driver max77857_driver = { + .driver = { + .name = "max77857", + .of_match_table = max77857_of_id, + }, + .id_table = max77857_id, + .probe_new = max77857_probe, +}; +module_i2c_driver(max77857_driver); + +MODULE_DESCRIPTION("Analog Devices MAX77857 Buck-Boost Converter Driver"); +MODULE_AUTHOR("Ibrahim Tilki Ibrahim.Tilki@analog.com"); +MODULE_AUTHOR("Okan Sahin Okan.Sahin@analog.com"); +MODULE_LICENSE("GPL");