From: Mathias Nyman mathias.nyman@linux.intel.com
commit b8c3b718087bf7c3c8e388eb1f72ac1108a4926e upstream.
A USB3 device needs to be reset and re-enumarated if the port it connects to goes to a error state, with link state inactive.
There is no use in trying to recover failed transactions by resetting endpoints at this stage. Tests show that in rare cases, after multiple endpoint resets of a roothub port the whole host controller might stop completely.
Several retries to recover from transaction error can happen as it can take a long time before the hub thread discovers the USB3 port error and inactive link.
We can't reliably detect the port error from slot or endpoint context due to a limitation in xhci, see xhci specs section 4.8.3: "There are several cases where the EP State field in the Output Endpoint Context may not reflect the current state of an endpoint" and "Software should maintain an accurate value for EP State, by tracking it with an internal variable that is driven by Events and Doorbell accesses"
Same appears to be true for slot state.
set a flag to the corresponding slot if a USB3 roothub port link goes inactive to prevent both queueing new URBs and resetting endpoints.
Reported-by: Rapolu Chiranjeevi chiranjeevi.rapolu@intel.com Tested-by: Rapolu Chiranjeevi chiranjeevi.rapolu@intel.com Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/host/xhci-ring.c | 15 ++++++++++++++- drivers/usb/host/xhci.c | 5 +++++ drivers/usb/host/xhci.h | 9 +++++++++ 3 files changed, 28 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1604,8 +1604,13 @@ static void handle_port_status(struct xh usb_hcd_resume_root_hub(hcd); }
- if (hcd->speed >= HCD_USB3 && (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) + if (hcd->speed >= HCD_USB3 && + (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) { + slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1); + if (slot_id && xhci->devs[slot_id]) + xhci->devs[slot_id]->flags |= VDEV_PORT_ERROR; bus_state->port_remote_wakeup &= ~(1 << hcd_portnum); + }
if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) { xhci_dbg(xhci, "port resume event for port %d\n", port_id); @@ -1793,6 +1798,14 @@ static void xhci_cleanup_halted_endpoint { struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; struct xhci_command *command; + + /* + * Avoid resetting endpoint if link is inactive. Can cause host hang. + * Device will be reset soon to recover the link so don't do anything + */ + if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR) + return; + command = xhci_alloc_command(xhci, false, GFP_ATOMIC); if (!command) return; --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1441,6 +1441,10 @@ static int xhci_urb_enqueue(struct usb_h xhci_dbg(xhci, "urb submitted during PCI suspend\n"); return -ESHUTDOWN; } + if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR) { + xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n"); + return -ENODEV; + }
if (usb_endpoint_xfer_isoc(&urb->ep->desc)) num_tds = urb->number_of_packets; @@ -3724,6 +3728,7 @@ static int xhci_discover_or_reset_device } /* If necessary, update the number of active TTs on this root port */ xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps); + virt_dev->flags = 0; ret = 0;
command_cleanup: --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1010,6 +1010,15 @@ struct xhci_virt_device { u8 real_port; struct xhci_interval_bw_table *bw_table; struct xhci_tt_bw_info *tt_info; + /* + * flags for state tracking based on events and issued commands. + * Software can not rely on states from output contexts because of + * latency between events and xHC updating output context values. + * See xhci 1.1 section 4.8.3 for more details + */ + unsigned long flags; +#define VDEV_PORT_ERROR BIT(0) /* Port error, link inactive */ + /* The current max exit latency for the enabled USB3 link states. */ u16 current_mel; /* Used for the debugfs interfaces. */