From: Marek Szyprowski m.szyprowski@samsung.com
[ Upstream commit daf12bee07b9e2f38216f58aca7ac4e4e66a7146 ]
For the proper reboot Odroid-C4 board requires to switch TFLASH_VDD_EN pin to the high impedance mode, otherwise the board is stuck in the middle of loading early stages of the bootloader from SD card.
This can be achieved by using the OPEN_DRAIN flag instead of the ACTIVE_HIGH, what will leave the pin in input mode to achieve high state (pin has the pull-up) and solve the issue.
Suggested-by: Neil Armstrong narmstrong@baylibre.com Fixes: 326e57518b0d ("arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4") Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Acked-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Kevin Hilman khilman@baylibre.com Link: https://lore.kernel.org/r/20210122055218.27241-1-m.szyprowski@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts index cf5a98f0e47c8..a712273c905af 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts @@ -52,7 +52,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
- gpio = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; enable-active-high; regulator-always-on; };