On Sun, Oct 15, 2023 at 03:58:38AM +0000, Badhri Jagan Sridharan wrote:
TCPM checks for sink caps operational current even when PD is disabled. This incorrectly sets tcpm_set_charge() when PD is disabled. Check for sink caps only when PD is enabled.
[ 97.572342] Start toggling [ 97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected] [ 99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected] [ 99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS] [ 99.903584] VBUS on [ 99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 99.903600] polarity 1 [ 99.910155] enable vbus discharge ret:0 [ 99.910160] Requesting mux state 1, usb-role 2, orientation 2 [ 99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS] [ 99.946800] Setting voltage/current limit 5000 mV 500 mA [ 99.946803] vbus=0 charge:=1 [ 100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS] [ 100.027145] Setting voltage/current limit 5000 mV 3000 mA [ 100.466830] VBUS on
Cc: stable@vger.kernel.org Fixes: 34fde9ec08a3 ("FROMGIT: usb: typec: tcpm: not sink vbus if operational current is 0mA")
This is obviously not a valid git id in Linus's tree, and our tools reject it :(
thanks,
greg k-h