From: H. Nikolaus Schaller hns@goldelico.com
commit e8d87a0b822d4b3d9a94a5da915f93aa1b674c93 upstream.
There is a ACT8600 on the CI20 board and the bindings of the ACT8865 driver have changed without updating the CI20 device tree. Therefore the PMU can not be probed successfully and is running in power-on reset state.
Fix DT to match the latest act8865-regulator bindings.
Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller hns@goldelico.com Reviewed-by: Paul Cercueil paul@crapouillou.net Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/mips/boot/dts/ingenic/ci20.dts | 39 ++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 15 deletions(-)
--- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -4,6 +4,7 @@ #include "jz4780.dtsi" #include <dt-bindings/clock/ingenic,tcu.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/active-semi,8865-regulator.h>
/ { compatible = "img,ci20", "ingenic,jz4780"; @@ -163,63 +164,71 @@
regulators { vddcore: SUDCDC1 { - regulator-name = "VDDCORE"; + regulator-name = "DCDC_REG1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; vddmem: SUDCDC2 { - regulator-name = "VDDMEM"; + regulator-name = "DCDC_REG2"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; vcc_33: SUDCDC3 { - regulator-name = "VCC33"; + regulator-name = "DCDC_REG3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vcc_50: SUDCDC4 { - regulator-name = "VCC50"; + regulator-name = "SUDCDC_REG4"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; vcc_25: LDO_REG5 { - regulator-name = "VCC25"; + regulator-name = "LDO_REG5"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; wifi_io: LDO_REG6 { - regulator-name = "WIFIIO"; + regulator-name = "LDO_REG6"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; vcc_28: LDO_REG7 { - regulator-name = "VCC28"; + regulator-name = "LDO_REG7"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; vcc_15: LDO_REG8 { - regulator-name = "VCC15"; + regulator-name = "LDO_REG8"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; - vcc_18: LDO_REG9 { - regulator-name = "VCC18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vrtc_18: LDO_REG9 { + regulator-name = "LDO_REG9"; + /* Despite the datasheet stating 3.3V + * for REG9 and the driver expecting that, + * REG9 outputs 1.8V. + * Likely the CI20 uses a proprietary + * factory programmed chip variant. + * Since this is a simple on/off LDO the + * exact values do not matter. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; vcc_11: LDO_REG10 { - regulator-name = "VCC11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-name = "LDO_REG10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; }; };