From: Jagath Jog J jagathjog1996@gmail.com
[ Upstream commit ffe0ab6a96988daa8b316290c15e1c7bbb9d4211 ]
Added trigger buffer support to read continuous acceleration and temperature data from device with data ready interrupt which is mapped to INT1 pin.
Signed-off-by: Jagath Jog J jagathjog1996@gmail.com Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Link: https://lore.kernel.org/r/20220505133021.22362-5-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/accel/Kconfig | 2 + drivers/iio/accel/bma400.h | 10 +- drivers/iio/accel/bma400_core.c | 177 +++++++++++++++++++++++++++++++- drivers/iio/accel/bma400_i2c.c | 2 +- drivers/iio/accel/bma400_spi.c | 2 +- 5 files changed, 185 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index b53f010f3e40..35798712f811 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -204,6 +204,8 @@ config BMA220 config BMA400 tristate "Bosch BMA400 3-Axis Accelerometer Driver" select REGMAP + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER select BMA400_I2C if I2C select BMA400_SPI if SPI help diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h index 1c8c47a9a317..907e1a6c0a38 100644 --- a/drivers/iio/accel/bma400.h +++ b/drivers/iio/accel/bma400.h @@ -62,6 +62,13 @@ #define BMA400_ACC_CONFIG2_REG 0x1b #define BMA400_CMD_REG 0x7e
+/* Interrupt registers */ +#define BMA400_INT_CONFIG0_REG 0x1f +#define BMA400_INT_CONFIG1_REG 0x20 +#define BMA400_INT1_MAP_REG 0x21 +#define BMA400_INT_IO_CTRL_REG 0x24 +#define BMA400_INT_DRDY_MSK BIT(7) + /* Chip ID of BMA 400 devices found in the chip ID register. */ #define BMA400_ID_REG_VAL 0x90
@@ -111,6 +118,7 @@
extern const struct regmap_config bma400_regmap_config;
-int bma400_probe(struct device *dev, struct regmap *regmap, const char *name); +int bma400_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name);
#endif diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c index 07674d89d978..67e102c097bc 100644 --- a/drivers/iio/accel/bma400_core.c +++ b/drivers/iio/accel/bma400_core.c @@ -11,6 +11,7 @@ * - Create channel for sensor time */
+#include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/device.h> #include <linux/kernel.h> @@ -20,6 +21,10 @@ #include <linux/regulator/consumer.h>
#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h>
#include "bma400.h"
@@ -46,6 +51,13 @@ enum bma400_power_mode { POWER_MODE_INVALID = 0x03, };
+enum bma400_scan { + BMA400_ACCL_X, + BMA400_ACCL_Y, + BMA400_ACCL_Z, + BMA400_TEMP, +}; + struct bma400_sample_freq { int hz; int uhz; @@ -61,6 +73,14 @@ struct bma400_data { struct bma400_sample_freq sample_freq; int oversampling_ratio; int scale; + struct iio_trigger *trig; + /* Correct time stamp alignment */ + struct { + __le16 buff[3]; + u8 temperature; + s64 ts __aligned(8); + } buffer __aligned(IIO_ALIGN); + __le16 status; };
static bool bma400_is_writable_reg(struct device *dev, unsigned int reg) @@ -152,7 +172,7 @@ static const struct iio_chan_spec_ext_info bma400_ext_info[] = { { } };
-#define BMA400_ACC_CHANNEL(_axis) { \ +#define BMA400_ACC_CHANNEL(_index, _axis) { \ .type = IIO_ACCEL, \ .modified = 1, \ .channel2 = IIO_MOD_##_axis, \ @@ -164,17 +184,32 @@ static const struct iio_chan_spec_ext_info bma400_ext_info[] = { BIT(IIO_CHAN_INFO_SCALE) | \ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .ext_info = bma400_ext_info, \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ }
static const struct iio_chan_spec bma400_channels[] = { - BMA400_ACC_CHANNEL(X), - BMA400_ACC_CHANNEL(Y), - BMA400_ACC_CHANNEL(Z), + BMA400_ACC_CHANNEL(0, X), + BMA400_ACC_CHANNEL(1, Y), + BMA400_ACC_CHANNEL(2, Z), { .type = IIO_TEMP, .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .scan_index = 3, + .scan_type = { + .sign = 's', + .realbits = 8, + .storagebits = 8, + .endianness = IIO_LE, + }, }, + IIO_CHAN_SOFT_TIMESTAMP(4), };
static int bma400_get_temp_reg(struct bma400_data *data, int *val, int *val2) @@ -659,6 +694,10 @@ static int bma400_init(struct bma400_data *data) if (ret) return ret;
+ /* Configure INT1 pin to open drain */ + ret = regmap_write(data->regmap, BMA400_INT_IO_CTRL_REG, 0x06); + if (ret) + return ret; /* * Once the interrupt engine is supported we might use the * data_src_reg, but for now ensure this is set to the @@ -807,6 +846,31 @@ static int bma400_write_raw_get_fmt(struct iio_dev *indio_dev, } }
+static int bma400_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct bma400_data *data = iio_priv(indio_dev); + int ret; + + ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG0_REG, + BMA400_INT_DRDY_MSK, + FIELD_PREP(BMA400_INT_DRDY_MSK, state)); + if (ret) + return ret; + + return regmap_update_bits(data->regmap, BMA400_INT1_MAP_REG, + BMA400_INT_DRDY_MSK, + FIELD_PREP(BMA400_INT_DRDY_MSK, state)); +} + +static const unsigned long bma400_avail_scan_masks[] = { + BIT(BMA400_ACCL_X) | BIT(BMA400_ACCL_Y) | BIT(BMA400_ACCL_Z), + BIT(BMA400_ACCL_X) | BIT(BMA400_ACCL_Y) | BIT(BMA400_ACCL_Z) + | BIT(BMA400_TEMP), + 0 +}; + static const struct iio_info bma400_info = { .read_raw = bma400_read_raw, .read_avail = bma400_read_avail, @@ -814,7 +878,78 @@ static const struct iio_info bma400_info = { .write_raw_get_fmt = bma400_write_raw_get_fmt, };
-int bma400_probe(struct device *dev, struct regmap *regmap, const char *name) +static const struct iio_trigger_ops bma400_trigger_ops = { + .set_trigger_state = &bma400_data_rdy_trigger_set_state, + .validate_device = &iio_trigger_validate_own_device, +}; + +static irqreturn_t bma400_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bma400_data *data = iio_priv(indio_dev); + int ret, temp; + + /* Lock to protect the data->buffer */ + mutex_lock(&data->mutex); + + /* bulk read six registers, with the base being the LSB register */ + ret = regmap_bulk_read(data->regmap, BMA400_X_AXIS_LSB_REG, + &data->buffer.buff, sizeof(data->buffer.buff)); + if (ret) + goto unlock_err; + + if (test_bit(BMA400_TEMP, indio_dev->active_scan_mask)) { + ret = regmap_read(data->regmap, BMA400_TEMP_DATA_REG, &temp); + if (ret) + goto unlock_err; + + data->buffer.temperature = temp; + } + + iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer, + iio_get_time_ns(indio_dev)); + + mutex_unlock(&data->mutex); + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; + +unlock_err: + mutex_unlock(&data->mutex); + return IRQ_NONE; +} + +static irqreturn_t bma400_interrupt(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct bma400_data *data = iio_priv(indio_dev); + int ret; + + /* Lock to protect the data->status */ + mutex_lock(&data->mutex); + ret = regmap_bulk_read(data->regmap, BMA400_INT_STAT0_REG, + &data->status, + sizeof(data->status)); + /* + * if none of the bit is set in the status register then it is + * spurious interrupt. + */ + if (ret || !data->status) + goto unlock_err; + + if (FIELD_GET(BMA400_INT_DRDY_MSK, le16_to_cpu(data->status))) { + mutex_unlock(&data->mutex); + iio_trigger_poll_chained(data->trig); + return IRQ_HANDLED; + } + +unlock_err: + mutex_unlock(&data->mutex); + return IRQ_NONE; +} + +int bma400_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name) { struct iio_dev *indio_dev; struct bma400_data *data; @@ -841,8 +976,40 @@ int bma400_probe(struct device *dev, struct regmap *regmap, const char *name) indio_dev->info = &bma400_info; indio_dev->channels = bma400_channels; indio_dev->num_channels = ARRAY_SIZE(bma400_channels); + indio_dev->available_scan_masks = bma400_avail_scan_masks; indio_dev->modes = INDIO_DIRECT_MODE;
+ if (irq > 0) { + data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", + indio_dev->name, + iio_device_id(indio_dev)); + if (!data->trig) + return -ENOMEM; + + data->trig->ops = &bma400_trigger_ops; + iio_trigger_set_drvdata(data->trig, indio_dev); + + ret = devm_iio_trigger_register(data->dev, data->trig); + if (ret) + return dev_err_probe(data->dev, ret, + "iio trigger register fail\n"); + + indio_dev->trig = iio_trigger_get(data->trig); + ret = devm_request_threaded_irq(dev, irq, NULL, + &bma400_interrupt, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + indio_dev->name, indio_dev); + if (ret) + return dev_err_probe(data->dev, ret, + "request irq %d failed\n", irq); + } + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + &bma400_trigger_handler, NULL); + if (ret) + return dev_err_probe(data->dev, ret, + "iio triggered buffer setup failed\n"); + return devm_iio_device_register(dev, indio_dev); } EXPORT_SYMBOL_NS(bma400_probe, IIO_BMA400); diff --git a/drivers/iio/accel/bma400_i2c.c b/drivers/iio/accel/bma400_i2c.c index 4f6e01a3b3a1..1ba2a982ea73 100644 --- a/drivers/iio/accel/bma400_i2c.c +++ b/drivers/iio/accel/bma400_i2c.c @@ -24,7 +24,7 @@ static int bma400_i2c_probe(struct i2c_client *client, return PTR_ERR(regmap); }
- return bma400_probe(&client->dev, regmap, id->name); + return bma400_probe(&client->dev, regmap, client->irq, id->name); }
static const struct i2c_device_id bma400_i2c_ids[] = { diff --git a/drivers/iio/accel/bma400_spi.c b/drivers/iio/accel/bma400_spi.c index 28e240400a3f..ec13c044b304 100644 --- a/drivers/iio/accel/bma400_spi.c +++ b/drivers/iio/accel/bma400_spi.c @@ -84,7 +84,7 @@ static int bma400_spi_probe(struct spi_device *spi) if (ret) dev_err(&spi->dev, "Failed to read chip id register\n");
- return bma400_probe(&spi->dev, regmap, id->name); + return bma400_probe(&spi->dev, regmap, spi->irq, id->name); }
static const struct spi_device_id bma400_spi_ids[] = {