This is a note to let you know that I've just added the patch titled
net/mlx4_en: Change default QoS settings
to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git%3Ba=su...
The filename of the patch is: net-mlx4_en-change-default-qos-settings.patch and it can be found in the queue-4.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From foo@baz Mon Apr 9 10:16:32 CEST 2018
From: Moni Shoua monis@mellanox.com Date: Thu, 28 Dec 2017 16:26:11 +0200 Subject: net/mlx4_en: Change default QoS settings
From: Moni Shoua monis@mellanox.com
[ Upstream commit a42b63c1ac1986f17f71bc91a6b0aaa14d4dae71 ]
Change the default mapping between TC and TCG as follows:
Prio | TC/TCG | from to | (set by FW) (set by SW) ---------+----------------------------------- 0 | 0/0 0/7 1 | 1/0 0/6 2 | 2/0 0/5 3 | 3/0 0/4 4 | 4/0 0/3 5 | 5/0 0/2 6 | 6/0 0/1 7 | 7/0 0/0
These new settings cause that a pause frame for any prio stops traffic for all prios.
Fixes: 564c274c3df0 ("net/mlx4_en: DCB QoS support") Signed-off-by: Moni Shoua monis@mellanox.com Signed-off-by: Maor Gottlieb maorg@mellanox.com Signed-off-by: Tariq Toukan tariqt@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net
Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 5 +++++ drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 7 +++++++ drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 + 3 files changed, 13 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -310,6 +310,7 @@ static int mlx4_en_ets_validate(struct m }
switch (ets->tc_tsa[i]) { + case IEEE_8021QAZ_TSA_VENDOR: case IEEE_8021QAZ_TSA_STRICT: break; case IEEE_8021QAZ_TSA_ETS: @@ -347,6 +348,10 @@ static int mlx4_en_config_port_scheduler /* higher TC means higher priority => lower pg */ for (i = IEEE_8021QAZ_MAX_TCS - 1; i >= 0; i--) { switch (ets->tc_tsa[i]) { + case IEEE_8021QAZ_TSA_VENDOR: + pg[i] = MLX4_EN_TC_VENDOR; + tc_tx_bw[i] = MLX4_EN_BW_MAX; + break; case IEEE_8021QAZ_TSA_STRICT: pg[i] = num_strict++; tc_tx_bw[i] = MLX4_EN_BW_MAX; --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -3336,6 +3336,13 @@ int mlx4_en_init_netdev(struct mlx4_en_d priv->msg_enable = MLX4_EN_MSG_LEVEL; #ifdef CONFIG_MLX4_EN_DCB if (!mlx4_is_slave(priv->mdev->dev)) { + u8 prio; + + for (prio = 0; prio < IEEE_8021QAZ_MAX_TCS; ++prio) { + priv->ets.prio_tc[prio] = prio; + priv->ets.tc_tsa[prio] = IEEE_8021QAZ_TSA_VENDOR; + } + priv->dcbx_cap = DCB_CAP_DCBX_VER_CEE | DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE; priv->flags |= MLX4_EN_DCB_ENABLED; --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -479,6 +479,7 @@ struct mlx4_en_frag_info { #define MLX4_EN_BW_MIN 1 #define MLX4_EN_BW_MAX 100 /* Utilize 100% of the line */
+#define MLX4_EN_TC_VENDOR 0 #define MLX4_EN_TC_ETS 7
enum dcb_pfc_type {
Patches currently in stable-queue which might be from monis@mellanox.com are
queue-4.15/net-mlx4_en-change-default-qos-settings.patch