From: Pali Rohár pali@kernel.org
commit 6964494582f56a3882c2c53b0edbfe99eb32b2e1 upstream.
Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link training and starting link training causes detection issues with some buggy cards (such as Compex WLE900VX).
Move the code which enables link training immediately before the one which starts link traning.
This fixes detection issues of Compex WLE900VX card on Turris MOX after cold boot.
Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...") Tested-by: Tomasz Maciej Nowak tmn505@gmail.com Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Acked-by: Rob Herring robh@kernel.org Acked-by: Thomas Petazzoni thomas.petazzoni@bootlin.com Signed-off-by: Marek Behún kabel@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/controller/pci-aardvark.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -280,11 +280,6 @@ static void advk_pcie_setup_hw(struct ad reg |= LANE_COUNT_1; advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
- /* Enable link training */ - reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); - reg |= LINK_TRAINING_EN; - advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); - /* Enable MSI */ reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG); reg |= PCIE_CORE_CTRL2_MSI_ENABLE; @@ -326,7 +321,15 @@ static void advk_pcie_setup_hw(struct ad */ msleep(PCI_PM_D3COLD_WAIT);
- /* Start link training */ + /* Enable link training */ + reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); + reg |= LINK_TRAINING_EN; + advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); + + /* + * Start link training immediately after enabling it. + * This solves problems for some buggy cards. + */ reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG); reg |= PCIE_CORE_LINK_TRAINING; advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);