On Tue, Apr 24, 2018 at 12:06:44PM +0800, xswang@marvell.com wrote:
From: Evan Wang xswang@marvell.com
Marvell armada37xx, armada7k and armada8k share the same AHCI sata controller IP, and currently there is an issue (Errata Ref#226)that the SATA can not be detected via SATA Port-MultiPlayer(PMP). After debugging, the reason is found that the value of Port-x FIS-based Switching Control (PxFBS@0x40) became wrong. According to design, the bits[11:8, 0] of register PxFBS are cleared when Port Command and Status (0x18) bit[0] changes its value from 1 to 0, i.e. falling edge of Port Command and Status bit[0] sends PULSE that resets PxFBS bits[11:8; 0]. So it needs save the port PxFBS register before PxCMD ST write and restore the port PxFBS register afterwards in ahci_stop_engine().
This commit allows drivers to override ahci_stop_engine behavior for use by the Marvell AHCI driver(and potentially other drivers in the future).
Signed-off-by: Evan Wang xswang@marvell.com Suggested-by: Ofer Heifetz oferh@marvell.com Cc: Tejun Heo tj@kernel.org Cc: Thomas Petazzoni thomas.petazzoni@bootlin.com
drivers/ata/ahci.c | 6 +++--- drivers/ata/ahci.h | 7 +++++++ drivers/ata/ahci_qoriq.c | 2 +- drivers/ata/ahci_xgene.c | 4 ++-- drivers/ata/libahci.c | 20 ++++++++++++-------- drivers/ata/sata_highbank.c | 2 +- 6 files changed, 26 insertions(+), 15 deletions(-)
<formletter>
This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read: https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html for how to do this properly.
</formletter>