From: Russell King rmk+kernel@armlinux.org.uk
[ Upstream commit 3d3ced2ec5d71b99d72ae6910fbdf890bc2eccf0 ]
Some boards do not have the PHY firmware programmed in the 3310's flash, which leads to the PHY not working as expected. Warn the user when the PHY fails to boot the firmware and refuse to initialise.
Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Tested-by: Maxime Chevallier maxime.chevallier@bootlin.com Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/phy/marvell10g.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
--- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -31,6 +31,9 @@ #define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa)
enum { + MV_PMA_BOOT = 0xc050, + MV_PMA_BOOT_FATAL = BIT(0), + MV_PCS_BASE_T = 0x0000, MV_PCS_BASE_R = 0x1000, MV_PCS_1000BASEX = 0x2000, @@ -211,6 +214,16 @@ static int mv3310_probe(struct phy_devic (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask) return -ENODEV;
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT); + if (ret < 0) + return ret; + + if (ret & MV_PMA_BOOT_FATAL) { + dev_warn(&phydev->mdio.dev, + "PHY failed to boot firmware, status=%04x\n", ret); + return -ENODEV; + } + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM;