5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rickard x Andersson rickaran@axis.com
commit 672448ccf9b6a676f96f9352cbf91f4d35f4084a upstream.
When about to transmit the function imx_uart_start_tx is called and in some RS485 configurations this function will call imx_uart_stop_rx. The problem is that imx_uart_stop_rx will enable loopback in order to release the RS485 bus, but when loopback is enabled transmitted data will just be looped to RX.
This patch fixes the above problem by not enabling loopback when about to transmit.
This driver now works well when used for RS485 half duplex master configurations.
Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") Cc: stable stable@kernel.org Signed-off-by: Rickard x Andersson rickaran@axis.com Tested-by: Christoph Niedermaier cniedermaier@dh-electronics.com Link: https://lore.kernel.org/r/20240221115304.509811-1-rickaran@axis.com Signed-off-by: Christoph Niedermaier cniedermaier@dh-electronics.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/imx.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-)
--- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -491,8 +491,7 @@ static void imx_uart_stop_tx(struct uart } }
-/* called with port.lock taken and irqs off */ -static void imx_uart_stop_rx(struct uart_port *port) +static void imx_uart_stop_rx_with_loopback_ctrl(struct uart_port *port, bool loopback) { struct imx_port *sport = (struct imx_port *)port; u32 ucr1, ucr2, ucr4, uts; @@ -514,7 +513,7 @@ static void imx_uart_stop_rx(struct uart /* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */ if (port->rs485.flags & SER_RS485_ENABLED && port->rs485.flags & SER_RS485_RTS_ON_SEND && - sport->have_rtscts && !sport->have_rtsgpio) { + sport->have_rtscts && !sport->have_rtsgpio && loopback) { uts = imx_uart_readl(sport, imx_uart_uts_reg(sport)); uts |= UTS_LOOP; imx_uart_writel(sport, uts, imx_uart_uts_reg(sport)); @@ -527,6 +526,16 @@ static void imx_uart_stop_rx(struct uart }
/* called with port.lock taken and irqs off */ +static void imx_uart_stop_rx(struct uart_port *port) +{ + /* + * Stop RX and enable loopback in order to make sure RS485 bus + * is not blocked. Se comment in imx_uart_probe(). + */ + imx_uart_stop_rx_with_loopback_ctrl(port, true); +} + +/* called with port.lock taken and irqs off */ static void imx_uart_enable_ms(struct uart_port *port) { struct imx_port *sport = (struct imx_port *)port; @@ -714,8 +723,13 @@ static void imx_uart_start_tx(struct uar imx_uart_rts_inactive(sport, &ucr2); imx_uart_writel(sport, ucr2, UCR2);
+ /* + * Since we are about to transmit we can not stop RX + * with loopback enabled because that will make our + * transmitted data being just looped to RX. + */ if (!(port->rs485.flags & SER_RS485_RX_DURING_TX)) - imx_uart_stop_rx(port); + imx_uart_stop_rx_with_loopback_ctrl(port, false);
sport->tx_state = WAIT_AFTER_RTS; start_hrtimer_ms(&sport->trigger_start_tx,