From: Jonathan Cooper jonathan.s.cooper@amd.com
[ Upstream commit a8aed7b35becfd21f22a77c7014029ea837b018f ]
Changing a VF's mac address through the VF (rather than via the PF) fails with EPERM because the latter part of efx_ef10_set_mac_address attempts to change the vport mac address list as the VF. Even with this fixed it still fails with EBUSY because the vadaptor is still assigned on the VF - the vadaptor reassignment must be within a section where the VF has torn down its state.
A major reason this has broken is because we have two functions that ostensibly do the same thing - have a PF and VF cooperate to change a VF mac address. Rather than do this, if we are changing the mac of a VF that has a link to the PF in the same VM then simply call sriov_set_vf_mac instead, which is a proven working function that does that.
If there is no PF available, or that fails non-fatally, then attempt to change the VF's mac address as we would a PF, without updating the PF's data.
Test case: Create a VF: echo 1 > /sys/class/net/<if>/device/sriov_numvfs Set the mac address of the VF directly: ip link set <vf> addr 00:11:22:33:44:55 Set the MAC address of the VF via the PF: ip link set <pf> vf 0 mac 00:11:22:33:44:66 Without this patch the last command will fail with ENOENT.
Signed-off-by: Jonathan Cooper jonathan.s.cooper@amd.com Reported-by: Íñigo Huguet ihuguet@redhat.com Fixes: 910c8789a777 ("set the MAC address using MC_CMD_VADAPTOR_SET_MAC") Acked-by: Edward Cree ecree.xilinx@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sfc/ef10.c | 58 ++++++++++++++------------------- 1 file changed, 24 insertions(+), 34 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index d1e1aa19a68e..7022fb2005a2 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -3277,6 +3277,30 @@ static int efx_ef10_set_mac_address(struct efx_nic *efx) bool was_enabled = efx->port_enabled; int rc;
+#ifdef CONFIG_SFC_SRIOV + /* If this function is a VF and we have access to the parent PF, + * then use the PF control path to attempt to change the VF MAC address. + */ + if (efx->pci_dev->is_virtfn && efx->pci_dev->physfn) { + struct efx_nic *efx_pf = pci_get_drvdata(efx->pci_dev->physfn); + struct efx_ef10_nic_data *nic_data = efx->nic_data; + u8 mac[ETH_ALEN]; + + /* net_dev->dev_addr can be zeroed by efx_net_stop in + * efx_ef10_sriov_set_vf_mac, so pass in a copy. + */ + ether_addr_copy(mac, efx->net_dev->dev_addr); + + rc = efx_ef10_sriov_set_vf_mac(efx_pf, nic_data->vf_index, mac); + if (!rc) + return 0; + + netif_dbg(efx, drv, efx->net_dev, + "Updating VF mac via PF failed (%d), setting directly\n", + rc); + } +#endif + efx_device_detach_sync(efx); efx_net_stop(efx->net_dev);
@@ -3297,40 +3321,6 @@ static int efx_ef10_set_mac_address(struct efx_nic *efx) efx_net_open(efx->net_dev); efx_device_attach_if_not_resetting(efx);
-#ifdef CONFIG_SFC_SRIOV - if (efx->pci_dev->is_virtfn && efx->pci_dev->physfn) { - struct efx_ef10_nic_data *nic_data = efx->nic_data; - struct pci_dev *pci_dev_pf = efx->pci_dev->physfn; - - if (rc == -EPERM) { - struct efx_nic *efx_pf; - - /* Switch to PF and change MAC address on vport */ - efx_pf = pci_get_drvdata(pci_dev_pf); - - rc = efx_ef10_sriov_set_vf_mac(efx_pf, - nic_data->vf_index, - efx->net_dev->dev_addr); - } else if (!rc) { - struct efx_nic *efx_pf = pci_get_drvdata(pci_dev_pf); - struct efx_ef10_nic_data *nic_data = efx_pf->nic_data; - unsigned int i; - - /* MAC address successfully changed by VF (with MAC - * spoofing) so update the parent PF if possible. - */ - for (i = 0; i < efx_pf->vf_count; ++i) { - struct ef10_vf *vf = nic_data->vf + i; - - if (vf->efx == efx) { - ether_addr_copy(vf->mac, - efx->net_dev->dev_addr); - return 0; - } - } - } - } else -#endif if (rc == -EPERM) { netif_err(efx, drv, efx->net_dev, "Cannot change MAC address; use sfboot to enable"