From: Gregory Greenman gregory.greenman@intel.com
[ Upstream commit f5d88fa334e6c8e2d840512ffbb30e3cb58d065b ]
The solution with the worker still had a bug, as in order to get sta, rcu_read_lock should be used and thus no mutex can be used inside iwl_mvm_rs_rate_init.
Also, spin_lock is a simpler solution, no need to spawn a dedicated worker.
Signed-off-by: Gregory Greenman gregory.greenman@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Johannes Berg johannes.berg@intel.com --- drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 530 +++++++++---------- drivers/net/wireless/intel/iwlwifi/mvm/rs.h | 6 +- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 6 +- drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 1 - 4 files changed, 258 insertions(+), 285 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c index 8a17b8e705e8..ddfa43a226fb 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c @@ -1197,278 +1197,6 @@ static u8 rs_get_tid(struct ieee80211_hdr *hdr) return tid; }
-void iwl_mvm_rs_init_wk(struct work_struct *wk) -{ - struct iwl_mvm_sta *mvmsta = container_of(wk, struct iwl_mvm_sta, - rs_init_wk); - struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(mvmsta->vif); - struct ieee80211_sta *sta; - - rcu_read_lock(); - - sta = rcu_dereference(mvmvif->mvm->fw_id_to_mac_id[mvmsta->sta_id]); - if (WARN_ON_ONCE(IS_ERR_OR_NULL(sta))) { - rcu_read_unlock(); - return; - } - - iwl_mvm_rs_rate_init(mvmvif->mvm, sta, mvmvif->phy_ctxt->channel->band, - true); - - rcu_read_unlock(); -} - -static void __iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, - struct ieee80211_sta *sta, - int tid, struct ieee80211_tx_info *info, - bool ndp) -{ - int legacy_success; - int retries; - int i; - struct iwl_lq_cmd *table; - u32 lq_hwrate; - struct rs_rate lq_rate, tx_resp_rate; - struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; - u32 tlc_info = (uintptr_t)info->status.status_driver_data[0]; - u8 reduced_txp = tlc_info & RS_DRV_DATA_TXP_MSK; - u8 lq_color = RS_DRV_DATA_LQ_COLOR_GET(tlc_info); - u32 tx_resp_hwrate = (uintptr_t)info->status.status_driver_data[1]; - struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); - struct iwl_lq_sta *lq_sta = &mvmsta->lq_sta.rs_drv; - - /* Treat uninitialized rate scaling data same as non-existing. */ - if (!lq_sta) { - IWL_DEBUG_RATE(mvm, "Station rate scaling not created yet.\n"); - return; - } else if (!lq_sta->pers.drv) { - IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); - return; - } - - /* This packet was aggregated but doesn't carry status info */ - if ((info->flags & IEEE80211_TX_CTL_AMPDU) && - !(info->flags & IEEE80211_TX_STAT_AMPDU)) - return; - - if (rs_rate_from_ucode_rate(tx_resp_hwrate, info->band, - &tx_resp_rate)) { - WARN_ON_ONCE(1); - return; - } - -#ifdef CONFIG_MAC80211_DEBUGFS - /* Disable last tx check if we are debugging with fixed rate but - * update tx stats */ - if (lq_sta->pers.dbg_fixed_rate) { - int index = tx_resp_rate.index; - enum rs_column column; - int attempts, success; - - column = rs_get_column_from_rate(&tx_resp_rate); - if (WARN_ONCE(column == RS_COLUMN_INVALID, - "Can't map rate 0x%x to column", - tx_resp_hwrate)) - return; - - if (info->flags & IEEE80211_TX_STAT_AMPDU) { - attempts = info->status.ampdu_len; - success = info->status.ampdu_ack_len; - } else { - attempts = info->status.rates[0].count; - success = !!(info->flags & IEEE80211_TX_STAT_ACK); - } - - lq_sta->pers.tx_stats[column][index].total += attempts; - lq_sta->pers.tx_stats[column][index].success += success; - - IWL_DEBUG_RATE(mvm, "Fixed rate 0x%x success %d attempts %d\n", - tx_resp_hwrate, success, attempts); - return; - } -#endif - - if (time_after(jiffies, - (unsigned long)(lq_sta->last_tx + - (IWL_MVM_RS_IDLE_TIMEOUT * HZ)))) { - IWL_DEBUG_RATE(mvm, "Tx idle for too long. reinit rs\n"); - schedule_work(&mvmsta->rs_init_wk); - return; - } - lq_sta->last_tx = jiffies; - - /* Ignore this Tx frame response if its initial rate doesn't match - * that of latest Link Quality command. There may be stragglers - * from a previous Link Quality command, but we're no longer interested - * in those; they're either from the "active" mode while we're trying - * to check "search" mode, or a prior "search" mode after we've moved - * to a new "search" mode (which might become the new "active" mode). - */ - table = &lq_sta->lq; - lq_hwrate = le32_to_cpu(table->rs_table[0]); - if (rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate)) { - WARN_ON_ONCE(1); - return; - } - - /* Here we actually compare this rate to the latest LQ command */ - if (lq_color != LQ_FLAG_COLOR_GET(table->flags)) { - IWL_DEBUG_RATE(mvm, - "tx resp color 0x%x does not match 0x%x\n", - lq_color, LQ_FLAG_COLOR_GET(table->flags)); - - /* - * Since rates mis-match, the last LQ command may have failed. - * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with - * ... driver. - */ - lq_sta->missed_rate_counter++; - if (lq_sta->missed_rate_counter > IWL_MVM_RS_MISSED_RATE_MAX) { - lq_sta->missed_rate_counter = 0; - IWL_DEBUG_RATE(mvm, - "Too many rates mismatch. Send sync LQ. rs_state %d\n", - lq_sta->rs_state); - iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq); - } - /* Regardless, ignore this status info for outdated rate */ - return; - } else - /* Rate did match, so reset the missed_rate_counter */ - lq_sta->missed_rate_counter = 0; - - if (!lq_sta->search_better_tbl) { - curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - } else { - curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - } - - if (WARN_ON_ONCE(!rs_rate_column_match(&lq_rate, &curr_tbl->rate))) { - IWL_DEBUG_RATE(mvm, - "Neither active nor search matches tx rate\n"); - tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - rs_dump_rate(mvm, &tmp_tbl->rate, "ACTIVE"); - tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - rs_dump_rate(mvm, &tmp_tbl->rate, "SEARCH"); - rs_dump_rate(mvm, &lq_rate, "ACTUAL"); - - /* - * no matching table found, let's by-pass the data collection - * and continue to perform rate scale to find the rate table - */ - rs_stay_in_table(lq_sta, true); - goto done; - } - - /* - * Updating the frame history depends on whether packets were - * aggregated. - * - * For aggregation, all packets were transmitted at the same rate, the - * first index into rate scale table. - */ - if (info->flags & IEEE80211_TX_STAT_AMPDU) { - rs_collect_tpc_data(mvm, lq_sta, curr_tbl, tx_resp_rate.index, - info->status.ampdu_len, - info->status.ampdu_ack_len, - reduced_txp); - - /* ampdu_ack_len = 0 marks no BA was received. For TLC, treat - * it as a single frame loss as we don't want the success ratio - * to dip too quickly because a BA wasn't received. - * For TPC, there's no need for this optimisation since we want - * to recover very quickly from a bad power reduction and, - * therefore we'd like the success ratio to get an immediate hit - * when failing to get a BA, so we'd switch back to a lower or - * zero power reduction. When FW transmits agg with a rate - * different from the initial rate, it will not use reduced txp - * and will send BA notification twice (one empty with reduced - * txp equal to the value from LQ and one with reduced txp 0). - * We need to update counters for each txp level accordingly. - */ - if (info->status.ampdu_ack_len == 0) - info->status.ampdu_len = 1; - - rs_collect_tlc_data(mvm, mvmsta, tid, curr_tbl, - tx_resp_rate.index, - info->status.ampdu_len, - info->status.ampdu_ack_len); - - /* Update success/fail counts if not searching for new mode */ - if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { - lq_sta->total_success += info->status.ampdu_ack_len; - lq_sta->total_failed += (info->status.ampdu_len - - info->status.ampdu_ack_len); - } - } else { - /* For legacy, update frame history with for each Tx retry. */ - retries = info->status.rates[0].count - 1; - /* HW doesn't send more than 15 retries */ - retries = min(retries, 15); - - /* The last transmission may have been successful */ - legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); - /* Collect data for each rate used during failed TX attempts */ - for (i = 0; i <= retries; ++i) { - lq_hwrate = le32_to_cpu(table->rs_table[i]); - if (rs_rate_from_ucode_rate(lq_hwrate, info->band, - &lq_rate)) { - WARN_ON_ONCE(1); - return; - } - - /* - * Only collect stats if retried rate is in the same RS - * table as active/search. - */ - if (rs_rate_column_match(&lq_rate, &curr_tbl->rate)) - tmp_tbl = curr_tbl; - else if (rs_rate_column_match(&lq_rate, - &other_tbl->rate)) - tmp_tbl = other_tbl; - else - continue; - - rs_collect_tpc_data(mvm, lq_sta, tmp_tbl, - tx_resp_rate.index, 1, - i < retries ? 0 : legacy_success, - reduced_txp); - rs_collect_tlc_data(mvm, mvmsta, tid, tmp_tbl, - tx_resp_rate.index, 1, - i < retries ? 0 : legacy_success); - } - - /* Update success/fail counts if not searching for new mode */ - if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { - lq_sta->total_success += legacy_success; - lq_sta->total_failed += retries + (1 - legacy_success); - } - } - /* The last TX rate is cached in lq_sta; it's set in if/else above */ - lq_sta->last_rate_n_flags = lq_hwrate; - IWL_DEBUG_RATE(mvm, "reduced txpower: %d\n", reduced_txp); -done: - /* See if there's a better rate or modulation mode to try. */ - if (sta->supp_rates[info->band]) - rs_rate_scale_perform(mvm, sta, lq_sta, tid, ndp); -} - -void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, - int tid, struct ieee80211_tx_info *info, bool ndp) -{ - struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); - - /* If it's locked we are in middle of init flow - * just wait for next tx status to update the lq_sta data - */ - if (!mutex_trylock(&mvmsta->lq_sta.rs_drv.mutex)) - return; - - __iwl_mvm_rs_tx_status(mvm, sta, tid, info, ndp); - mutex_unlock(&mvmsta->lq_sta.rs_drv.mutex); -} - /* * mac80211 sends us Tx status */ @@ -3230,6 +2958,8 @@ static void rs_drv_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, struct ieee80211_supported_band *sband; unsigned long supp; /* must be unsigned long for for_each_set_bit */
+ lockdep_assert_held(&mvmsta->lq_sta.rs_drv.pers.lock); + /* clear all non-persistent lq data */ memset(lq_sta, 0, offsetof(typeof(*lq_sta), pers));
@@ -3322,6 +3052,258 @@ static void rs_drv_rate_update(void *mvm_r, iwl_mvm_rs_rate_init(mvm, sta, sband->band, true); }
+static void __iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, + int tid, struct ieee80211_tx_info *info, + bool ndp) +{ + int legacy_success; + int retries; + int i; + struct iwl_lq_cmd *table; + u32 lq_hwrate; + struct rs_rate lq_rate, tx_resp_rate; + struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; + u32 tlc_info = (uintptr_t)info->status.status_driver_data[0]; + u8 reduced_txp = tlc_info & RS_DRV_DATA_TXP_MSK; + u8 lq_color = RS_DRV_DATA_LQ_COLOR_GET(tlc_info); + u32 tx_resp_hwrate = (uintptr_t)info->status.status_driver_data[1]; + struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); + struct iwl_lq_sta *lq_sta = &mvmsta->lq_sta.rs_drv; + + /* Treat uninitialized rate scaling data same as non-existing. */ + if (!lq_sta) { + IWL_DEBUG_RATE(mvm, "Station rate scaling not created yet.\n"); + return; + } else if (!lq_sta->pers.drv) { + IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); + return; + } + + /* This packet was aggregated but doesn't carry status info */ + if ((info->flags & IEEE80211_TX_CTL_AMPDU) && + !(info->flags & IEEE80211_TX_STAT_AMPDU)) + return; + + if (rs_rate_from_ucode_rate(tx_resp_hwrate, info->band, + &tx_resp_rate)) { + WARN_ON_ONCE(1); + return; + } + +#ifdef CONFIG_MAC80211_DEBUGFS + /* Disable last tx check if we are debugging with fixed rate but + * update tx stats + */ + if (lq_sta->pers.dbg_fixed_rate) { + int index = tx_resp_rate.index; + enum rs_column column; + int attempts, success; + + column = rs_get_column_from_rate(&tx_resp_rate); + if (WARN_ONCE(column == RS_COLUMN_INVALID, + "Can't map rate 0x%x to column", + tx_resp_hwrate)) + return; + + if (info->flags & IEEE80211_TX_STAT_AMPDU) { + attempts = info->status.ampdu_len; + success = info->status.ampdu_ack_len; + } else { + attempts = info->status.rates[0].count; + success = !!(info->flags & IEEE80211_TX_STAT_ACK); + } + + lq_sta->pers.tx_stats[column][index].total += attempts; + lq_sta->pers.tx_stats[column][index].success += success; + + IWL_DEBUG_RATE(mvm, "Fixed rate 0x%x success %d attempts %d\n", + tx_resp_hwrate, success, attempts); + return; + } +#endif + + if (time_after(jiffies, + (unsigned long)(lq_sta->last_tx + + (IWL_MVM_RS_IDLE_TIMEOUT * HZ)))) { + IWL_DEBUG_RATE(mvm, "Tx idle for too long. reinit rs\n"); + /* reach here only in case of driver RS, call directly + * the unlocked version + */ + rs_drv_rate_init(mvm, sta, info->band); + return; + } + lq_sta->last_tx = jiffies; + + /* Ignore this Tx frame response if its initial rate doesn't match + * that of latest Link Quality command. There may be stragglers + * from a previous Link Quality command, but we're no longer interested + * in those; they're either from the "active" mode while we're trying + * to check "search" mode, or a prior "search" mode after we've moved + * to a new "search" mode (which might become the new "active" mode). + */ + table = &lq_sta->lq; + lq_hwrate = le32_to_cpu(table->rs_table[0]); + if (rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate)) { + WARN_ON_ONCE(1); + return; + } + + /* Here we actually compare this rate to the latest LQ command */ + if (lq_color != LQ_FLAG_COLOR_GET(table->flags)) { + IWL_DEBUG_RATE(mvm, + "tx resp color 0x%x does not match 0x%x\n", + lq_color, LQ_FLAG_COLOR_GET(table->flags)); + + /* Since rates mis-match, the last LQ command may have failed. + * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with + * ... driver. + */ + lq_sta->missed_rate_counter++; + if (lq_sta->missed_rate_counter > IWL_MVM_RS_MISSED_RATE_MAX) { + lq_sta->missed_rate_counter = 0; + IWL_DEBUG_RATE(mvm, + "Too many rates mismatch. Send sync LQ. rs_state %d\n", + lq_sta->rs_state); + iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq); + } + /* Regardless, ignore this status info for outdated rate */ + return; + } + + /* Rate did match, so reset the missed_rate_counter */ + lq_sta->missed_rate_counter = 0; + + if (!lq_sta->search_better_tbl) { + curr_tbl = &lq_sta->lq_info[lq_sta->active_tbl]; + other_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl]; + } else { + curr_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl]; + other_tbl = &lq_sta->lq_info[lq_sta->active_tbl]; + } + + if (WARN_ON_ONCE(!rs_rate_column_match(&lq_rate, &curr_tbl->rate))) { + IWL_DEBUG_RATE(mvm, + "Neither active nor search matches tx rate\n"); + tmp_tbl = &lq_sta->lq_info[lq_sta->active_tbl]; + rs_dump_rate(mvm, &tmp_tbl->rate, "ACTIVE"); + tmp_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl]; + rs_dump_rate(mvm, &tmp_tbl->rate, "SEARCH"); + rs_dump_rate(mvm, &lq_rate, "ACTUAL"); + + /* no matching table found, let's by-pass the data collection + * and continue to perform rate scale to find the rate table + */ + rs_stay_in_table(lq_sta, true); + goto done; + } + + /* Updating the frame history depends on whether packets were + * aggregated. + * + * For aggregation, all packets were transmitted at the same rate, the + * first index into rate scale table. + */ + if (info->flags & IEEE80211_TX_STAT_AMPDU) { + rs_collect_tpc_data(mvm, lq_sta, curr_tbl, tx_resp_rate.index, + info->status.ampdu_len, + info->status.ampdu_ack_len, + reduced_txp); + + /* ampdu_ack_len = 0 marks no BA was received. For TLC, treat + * it as a single frame loss as we don't want the success ratio + * to dip too quickly because a BA wasn't received. + * For TPC, there's no need for this optimisation since we want + * to recover very quickly from a bad power reduction and, + * therefore we'd like the success ratio to get an immediate hit + * when failing to get a BA, so we'd switch back to a lower or + * zero power reduction. When FW transmits agg with a rate + * different from the initial rate, it will not use reduced txp + * and will send BA notification twice (one empty with reduced + * txp equal to the value from LQ and one with reduced txp 0). + * We need to update counters for each txp level accordingly. + */ + if (info->status.ampdu_ack_len == 0) + info->status.ampdu_len = 1; + + rs_collect_tlc_data(mvm, mvmsta, tid, curr_tbl, + tx_resp_rate.index, + info->status.ampdu_len, + info->status.ampdu_ack_len); + + /* Update success/fail counts if not searching for new mode */ + if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { + lq_sta->total_success += info->status.ampdu_ack_len; + lq_sta->total_failed += (info->status.ampdu_len - + info->status.ampdu_ack_len); + } + } else { + /* For legacy, update frame history with for each Tx retry. */ + retries = info->status.rates[0].count - 1; + /* HW doesn't send more than 15 retries */ + retries = min(retries, 15); + + /* The last transmission may have been successful */ + legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); + /* Collect data for each rate used during failed TX attempts */ + for (i = 0; i <= retries; ++i) { + lq_hwrate = le32_to_cpu(table->rs_table[i]); + if (rs_rate_from_ucode_rate(lq_hwrate, info->band, + &lq_rate)) { + WARN_ON_ONCE(1); + return; + } + + /* Only collect stats if retried rate is in the same RS + * table as active/search. + */ + if (rs_rate_column_match(&lq_rate, &curr_tbl->rate)) + tmp_tbl = curr_tbl; + else if (rs_rate_column_match(&lq_rate, + &other_tbl->rate)) + tmp_tbl = other_tbl; + else + continue; + + rs_collect_tpc_data(mvm, lq_sta, tmp_tbl, + tx_resp_rate.index, 1, + i < retries ? 0 : legacy_success, + reduced_txp); + rs_collect_tlc_data(mvm, mvmsta, tid, tmp_tbl, + tx_resp_rate.index, 1, + i < retries ? 0 : legacy_success); + } + + /* Update success/fail counts if not searching for new mode */ + if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { + lq_sta->total_success += legacy_success; + lq_sta->total_failed += retries + (1 - legacy_success); + } + } + /* The last TX rate is cached in lq_sta; it's set in if/else above */ + lq_sta->last_rate_n_flags = lq_hwrate; + IWL_DEBUG_RATE(mvm, "reduced txpower: %d\n", reduced_txp); +done: + /* See if there's a better rate or modulation mode to try. */ + if (sta->supp_rates[info->band]) + rs_rate_scale_perform(mvm, sta, lq_sta, tid, ndp); +} + +void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, + int tid, struct ieee80211_tx_info *info, bool ndp) +{ + struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); + + /* If it's locked we are in middle of init flow + * just wait for next tx status to update the lq_sta data + */ + if (!spin_trylock(&mvmsta->lq_sta.rs_drv.pers.lock)) + return; + + __iwl_mvm_rs_tx_status(mvm, sta, tid, info, ndp); + spin_unlock(&mvmsta->lq_sta.rs_drv.pers.lock); +} + #ifdef CONFIG_MAC80211_DEBUGFS static void rs_build_rates_table_from_fixed(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq_cmd, @@ -4181,9 +4163,9 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, } else { struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
- mutex_lock(&mvmsta->lq_sta.rs_drv.mutex); + spin_lock(&mvmsta->lq_sta.rs_drv.pers.lock); rs_drv_rate_init(mvm, sta, band); - mutex_unlock(&mvmsta->lq_sta.rs_drv.mutex); + spin_unlock(&mvmsta->lq_sta.rs_drv.pers.lock); } }
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h index 086f47e2a4f0..428642e66658 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h @@ -376,9 +376,6 @@ struct iwl_lq_sta { /* tx power reduce for this sta */ int tpc_reduce;
- /* avoid races of reinit and update table from rx_tx */ - struct mutex mutex; - /* persistent fields - initialized only once - keep last! */ struct lq_sta_pers { #ifdef CONFIG_MAC80211_DEBUGFS @@ -393,6 +390,7 @@ struct iwl_lq_sta { s8 last_rssi; struct rs_rate_stats tx_stats[RS_COLUMN_COUNT][IWL_RATE_COUNT]; struct iwl_mvm *drv; + spinlock_t lock; /* for races in reinit/update table */ } pers; };
@@ -443,8 +441,6 @@ struct iwl_mvm_sta; int iwl_mvm_tx_protection(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, bool enable);
-void iwl_mvm_rs_init_wk(struct work_struct *wk); - #ifdef CONFIG_IWLWIFI_DEBUGFS void iwl_mvm_reset_frame_stats(struct iwl_mvm *mvm); #endif diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 22715cdb8317..946d4cd30694 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1685,9 +1685,7 @@ int iwl_mvm_add_sta(struct iwl_mvm *mvm, if (iwl_mvm_has_tlc_offload(mvm)) iwl_mvm_rs_add_sta(mvm, mvm_sta); else - mutex_init(&mvm_sta->lq_sta.rs_drv.mutex); - - INIT_WORK(&mvm_sta->rs_init_wk, iwl_mvm_rs_init_wk); + spin_lock_init(&mvm_sta->lq_sta.rs_drv.pers.lock);
iwl_mvm_toggle_tx_ant(mvm, &mvm_sta->tx_ant);
@@ -1850,8 +1848,6 @@ int iwl_mvm_rm_sta(struct iwl_mvm *mvm, if (ret) return ret;
- cancel_work_sync(&mvm_sta->rs_init_wk); - /* flush its queues here since we are freeing mvm_sta */ ret = iwl_mvm_flush_sta(mvm, mvm_sta, false, 0); if (ret) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h index 6e93c30492b7..b4d4071b865d 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -421,7 +421,6 @@ struct iwl_mvm_sta { struct iwl_lq_sta_rs_fw rs_fw; struct iwl_lq_sta rs_drv; } lq_sta; - struct work_struct rs_init_wk; struct ieee80211_vif *vif; struct iwl_mvm_key_pn __rcu *ptk_pn[4]; struct iwl_mvm_rxq_dup_data *dup_data;