6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xu Yang xu.yang_2@nxp.com
commit 36668515d56bf73f06765c71e08c8f7465f1e5c4 upstream.
In current driver, the value of tuning parameter will not take effect if samsung,picophy-* is assigned as 0. Because 0 is also a valid value acccording to the description of USB_PHY_CFG1 register, this will improve the logic to let it work.
Fixes: 58a3cefb3840 ("usb: chipidea: imx: add two samsung picophy parameters tuning implementation") cc: stable@vger.kernel.org Signed-off-by: Xu Yang xu.yang_2@nxp.com Acked-by: Peter Chen peter.chen@kernel.org Link: https://lore.kernel.org/r/20230627112126.1882666-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/chipidea/ci_hdrc_imx.c | 10 ++++++---- drivers/usb/chipidea/usbmisc_imx.c | 6 ++++-- 2 files changed, 10 insertions(+), 6 deletions(-)
--- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -175,10 +175,12 @@ static struct imx_usbmisc_data *usbmisc_ if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) data->ulpi = 1;
- of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control", - &data->emp_curr_control); - of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust", - &data->dc_vol_level_adjust); + if (of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control", + &data->emp_curr_control)) + data->emp_curr_control = -1; + if (of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust", + &data->dc_vol_level_adjust)) + data->dc_vol_level_adjust = -1;
return data; } --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -657,13 +657,15 @@ static int usbmisc_imx7d_init(struct imx usbmisc->base + MX7D_USBNC_USB_CTRL2); /* PHY tuning for signal quality */ reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1); - if (data->emp_curr_control && data->emp_curr_control <= + if (data->emp_curr_control >= 0 && + data->emp_curr_control <= (TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) { reg &= ~TXPREEMPAMPTUNE0_MASK; reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT); }
- if (data->dc_vol_level_adjust && data->dc_vol_level_adjust <= + if (data->dc_vol_level_adjust >= 0 && + data->dc_vol_level_adjust <= (TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) { reg &= ~TXVREFTUNE0_MASK; reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT);