From: Huy Nguyen huyn@mellanox.com
[ Upstream commit 73e6551699a32fac703ceea09214d6580edcf2d5 ]
When the user changes prio2buffer mapping while global pause is enabled, mlx5 driver incorrectly sets all active buffers (buffer that has at least one priority mapped) to lossy.
Solution: If global pause is enabled, set all the active buffers to lossless in prio2buffer command. Also, add error message when buffer size is not enough to meet xoff threshold.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration") Signed-off-by: Huy Nguyen huyn@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c | 27 +++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c @@ -155,8 +155,11 @@ static int update_xoff_threshold(struct }
if (port_buffer->buffer[i].size < - (xoff + max_mtu + (1 << MLX5E_BUFFER_CELL_SHIFT))) + (xoff + max_mtu + (1 << MLX5E_BUFFER_CELL_SHIFT))) { + pr_err("buffer_size[%d]=%d is not enough for lossless buffer\n", + i, port_buffer->buffer[i].size); return -ENOMEM; + }
port_buffer->buffer[i].xoff = port_buffer->buffer[i].size - xoff; port_buffer->buffer[i].xon = @@ -232,6 +235,26 @@ static int update_buffer_lossy(unsigned return 0; }
+static int fill_pfc_en(struct mlx5_core_dev *mdev, u8 *pfc_en) +{ + u32 g_rx_pause, g_tx_pause; + int err; + + err = mlx5_query_port_pause(mdev, &g_rx_pause, &g_tx_pause); + if (err) + return err; + + /* If global pause enabled, set all active buffers to lossless. + * Otherwise, check PFC setting. + */ + if (g_rx_pause || g_tx_pause) + *pfc_en = 0xff; + else + err = mlx5_query_port_pfc(mdev, pfc_en, NULL); + + return err; +} + #define MINIMUM_MAX_MTU 9216 int mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv, u32 change, unsigned int mtu, @@ -277,7 +300,7 @@ int mlx5e_port_manual_buffer_config(stru
if (change & MLX5E_PORT_BUFFER_PRIO2BUFFER) { update_prio2buffer = true; - err = mlx5_query_port_pfc(priv->mdev, &curr_pfc_en, NULL); + err = fill_pfc_en(priv->mdev, &curr_pfc_en); if (err) return err;