From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit d662a7df36e1edc65eaf166ec1c8527ce9d088ea ]
We should terminate charging when we reach the voltage_max_design_uv not overvoltage_limit_uv, this is an abuse of that struct member.
The overvoltage limit is actually not configurable on the AB8500, it is fixed to 4.75 V so drop a comment about that in the code.
Fixes: 2a5f41830aad ("power: supply: ab8500: Standardize voltages") Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/supply/ab8500_bmdata.c | 8 +++----- drivers/power/supply/ab8500_chargalg.c | 2 +- drivers/power/supply/ab8500_fg.c | 8 +++++++- 3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/power/supply/ab8500_bmdata.c b/drivers/power/supply/ab8500_bmdata.c index 7ae95f537580..9a8334a65de1 100644 --- a/drivers/power/supply/ab8500_bmdata.c +++ b/drivers/power/supply/ab8500_bmdata.c @@ -188,13 +188,11 @@ int ab8500_bm_of_probe(struct power_supply *psy, * fall back to safe defaults. */ if ((bi->voltage_min_design_uv < 0) || - (bi->voltage_max_design_uv < 0) || - (bi->overvoltage_limit_uv < 0)) { + (bi->voltage_max_design_uv < 0)) { /* Nominal voltage is 3.7V for unknown batteries */ bi->voltage_min_design_uv = 3700000; - bi->voltage_max_design_uv = 3700000; - /* Termination voltage (overcharge limit) 4.05V */ - bi->overvoltage_limit_uv = 4050000; + /* Termination voltage 4.05V */ + bi->voltage_max_design_uv = 4050000; }
if (bi->constant_charge_current_max_ua < 0) diff --git a/drivers/power/supply/ab8500_chargalg.c b/drivers/power/supply/ab8500_chargalg.c index c4a2fe07126c..bcf85ae6828e 100644 --- a/drivers/power/supply/ab8500_chargalg.c +++ b/drivers/power/supply/ab8500_chargalg.c @@ -802,7 +802,7 @@ static void ab8500_chargalg_end_of_charge(struct ab8500_chargalg *di) if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING && di->charge_state == STATE_NORMAL && !di->maintenance_chg && (di->batt_data.volt_uv >= - di->bm->bi->overvoltage_limit_uv || + di->bm->bi->voltage_max_design_uv || di->events.usb_cv_active || di->events.ac_cv_active) && di->batt_data.avg_curr_ua < di->bm->bi->charge_term_current_ua && diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c index b0919a6a6587..236fd9f9d6f1 100644 --- a/drivers/power/supply/ab8500_fg.c +++ b/drivers/power/supply/ab8500_fg.c @@ -2263,7 +2263,13 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di) { int ret;
- /* Set VBAT OVV threshold */ + /* + * Set VBAT OVV (overvoltage) threshold to 4.75V (typ) this is what + * the hardware supports, nothing else can be configured in hardware. + * See this as an "outer limit" where the charger will certainly + * shut down. Other (lower) overvoltage levels need to be implemented + * in software. + */ ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_BATT_OVV,