[ Upstream commit 18fb053f9b827bd98cfc64f2a35df8ab19745a1d ]
There are comments in processor-cyrix.h advising you to _not_ make calls using the deprecated macros in this style:
setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
This is because it expands the macro into a non-functioning calling sequence. The calling order must be:
outb(CX86_CCR2, 0x22); inb(0x23);
From the comments:
* When using the old macros a line like * setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); * gets expanded to: * do { * outb((CX86_CCR2), 0x22); * outb((({ * outb((CX86_CCR2), 0x22); * inb(0x23); * }) | 0x88), 0x23); * } while (0);
The new macros fix this problem, so use them instead. Tested on an actual Geode processor.
Signed-off-by: Matthew Whitehead tedheadster@gmail.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: luto@kernel.org Link: https://lkml.kernel.org/r/1552596361-8967-2-git-send-email-tedheadster@gmail... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/cpu/cyrix.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index 15e47c1cd412..6e4e4191abb5 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -121,7 +121,7 @@ static void set_cx86_reorder(void) setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* Load/Store Serialize to mem access disable (=reorder it) */ - setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80); + setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80); /* set load/store serialize from 1GB to 4GB */ ccr3 |= 0xe0; setCx86(CX86_CCR3, ccr3); @@ -132,11 +132,11 @@ static void set_cx86_memwb(void) printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
/* CCR2 bit 2: unlock NW bit */ - setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04); + setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04); /* set 'Not Write-through' */ write_cr0(read_cr0() | X86_CR0_NW); /* CCR2 bit 2: lock NW bit and set WT1 */ - setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14); + setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14); }
/* @@ -150,14 +150,14 @@ static void geode_configure(void) local_irq_save(flags);
/* Suspend on halt power saving and enable #SUSP pin */ - setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88); + setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
ccr3 = getCx86(CX86_CCR3); setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* FPU fast, DTE cache, Mem bypass */ - setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38); + setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38); setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
set_cx86_memwb(); @@ -292,7 +292,7 @@ static void init_cyrix(struct cpuinfo_x86 *c) /* GXm supports extended cpuid levels 'ala' AMD */ if (c->cpuid_level == 2) { /* Enable cxMMX extensions (GX1 Datasheet 54) */ - setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1); + setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
/* * GXm : 0x30 ... 0x5f GXm datasheet 51 @@ -315,7 +315,7 @@ static void init_cyrix(struct cpuinfo_x86 *c) if (dir1 > 7) { dir0_msn++; /* M II */ /* Enable MMX extensions (App note 108) */ - setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1); + setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1); } else { /* A 6x86MX - it has the bug. */ set_cpu_bug(c, X86_BUG_COMA);