From: Timo Sigurdsson public_timo.s@silentcreek.de
commit f6bca4d91b2ea052e917cca3f9d866b5cc1d500a upstream.
DIPM is unsupported or broken on sunxi. Trying to enable the power management policy med_power_with_dipm on an Allwinner A20 SoC based board leads to immediate I/O errors and the attached SATA disk disappears from the /dev filesystem. A reset (power cycle) is required to make the SATA controller or disk work again. The A10 and A20 SoC data sheets and manuals don't mention DIPM at all [1], so it's fair to assume that it's simply not supported. But even if it was, it should be considered broken and best be disabled in the ahci_sunxi driver.
[1] https://github.com/allwinner-zh/documents/tree/master/
Fixes: c5754b5220f0 ("ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform") Cc: stable@vger.kernel.org Signed-off-by: Timo Sigurdsson public_timo.s@silentcreek.de Tested-by: Timo Sigurdsson public_timo.s@silentcreek.de Link: https://lore.kernel.org/r/20210614072539.3307-1-public_timo.s@silentcreek.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/ata/ahci_sunxi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/ahci_sunxi.c +++ b/drivers/ata/ahci_sunxi.c @@ -165,7 +165,7 @@ static void ahci_sunxi_start_engine(stru }
static const struct ata_port_info ahci_sunxi_port_info = { - .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ, + .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ | ATA_FLAG_NO_DIPM, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_platform_ops,