tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use MSR_IA32_TSX_CTRL when supported.
[ bp: Document how and why TSX gets disabled. ]
Fixes: 293649307ef9 ("x86/tsx: Clear CPUID bits when TSX always force aborts") Reported-by: kernel test robot lkp@intel.com Signed-off-by: Pawan Gupta pawan.kumar.gupta@linux.intel.com Signed-off-by: Borislav Petkov bp@suse.de Tested-by: Neelima Krishnan neelima.krishnan@intel.com Cc: stable@vger.kernel.org --- arch/x86/kernel/cpu/intel.c | 1 + arch/x86/kernel/cpu/tsx.c | 54 ++++++++++++++++++++++++++++++++----- 2 files changed, 48 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 8321c43554a1..8abf995677a4 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -722,6 +722,7 @@ static void init_intel(struct cpuinfo_x86 *c) else if (tsx_ctrl_state == TSX_CTRL_DISABLE) tsx_disable(); else if (tsx_ctrl_state == TSX_CTRL_RTM_ALWAYS_ABORT) + /* See comment over that function for more details. */ tsx_clear_cpuid();
split_lock_init(); diff --git a/arch/x86/kernel/cpu/tsx.c b/arch/x86/kernel/cpu/tsx.c index 9c7a5f049292..2835fa89fc6f 100644 --- a/arch/x86/kernel/cpu/tsx.c +++ b/arch/x86/kernel/cpu/tsx.c @@ -58,7 +58,7 @@ void tsx_enable(void) wrmsrl(MSR_IA32_TSX_CTRL, tsx); }
-static bool __init tsx_ctrl_is_supported(void) +static bool tsx_ctrl_is_supported(void) { u64 ia32_cap = x86_read_arch_cap_msr();
@@ -84,6 +84,44 @@ static enum tsx_ctrl_states x86_get_tsx_auto_mode(void) return TSX_CTRL_ENABLE; }
+/* + * Disabling TSX is not a trivial business. + * + * First of all, there's a CPUID bit: X86_FEATURE_RTM_ALWAYS_ABORT + * which says that TSX is practically disabled (all transactions are + * aborted by default). When that bit is set, the kernel unconditionally + * disables TSX. + * + * In order to do that, however, it needs to dance a bit: + * + * 1. The first method to disable it is through MSR_TSX_FORCE_ABORT and + * the MSR is present only when *two* CPUID bits are set: + * + * - X86_FEATURE_RTM_ALWAYS_ABORT + * - X86_FEATURE_TSX_FORCE_ABORT + * + * 2. The second method is for CPUs which do not have the above-mentioned + * MSR: those use a different MSR - MSR_IA32_TSX_CTRL and disable TSX + * through that one. Those CPUs can also have the initially mentioned + * CPUID bit X86_FEATURE_RTM_ALWAYS_ABORT set and for those the same strategy + * applies: TSX gets disabled unconditionally. + * + * When either of the two methods are present, the kernel disables TSX and + * clears the respective RTM and HLE feature flags. + * + * An additional twist in the whole thing presents late microcode loading + * which, when done, may cause for the X86_FEATURE_RTM_ALWAYS_ABORT CPUID + * bit to be set after the update. + * + * A subsequent hotplug operation on any logical CPU except the BSP will + * cause for the supported CPUID feature bits to get re-detected and, if + * RTM and HLE get cleared all of a sudden, but, userspace did consult + * them before the update, then funny explosions will happen. Long story + * short: the kernel doesn't modify CPUID feature bits after booting. + * + * That's why, this function's call in init_intel() doesn't clear the + * feature flags. + */ void tsx_clear_cpuid(void) { u64 msr; @@ -97,6 +135,10 @@ void tsx_clear_cpuid(void) rdmsrl(MSR_TSX_FORCE_ABORT, msr); msr |= MSR_TFA_TSX_CPUID_CLEAR; wrmsrl(MSR_TSX_FORCE_ABORT, msr); + } else if (tsx_ctrl_is_supported()) { + rdmsrl(MSR_IA32_TSX_CTRL, msr); + msr |= TSX_CTRL_CPUID_CLEAR; + wrmsrl(MSR_IA32_TSX_CTRL, msr); } }
@@ -106,13 +148,11 @@ void __init tsx_init(void) int ret;
/* - * Hardware will always abort a TSX transaction if both CPUID bits - * RTM_ALWAYS_ABORT and TSX_FORCE_ABORT are set. In this case, it is - * better not to enumerate CPUID.RTM and CPUID.HLE bits. Clear them - * here. + * Hardware will always abort a TSX transaction when CPUID + * RTM_ALWAYS_ABORT is set. In this case, it is better not to enumerate + * CPUID.RTM and CPUID.HLE bits. Clear them here. */ - if (boot_cpu_has(X86_FEATURE_RTM_ALWAYS_ABORT) && - boot_cpu_has(X86_FEATURE_TSX_FORCE_ABORT)) { + if (boot_cpu_has(X86_FEATURE_RTM_ALWAYS_ABORT)) { tsx_ctrl_state = TSX_CTRL_RTM_ALWAYS_ABORT; tsx_clear_cpuid(); setup_clear_cpu_cap(X86_FEATURE_RTM);