From: Martin Blumenstingl martin.blumenstingl@googlemail.com
[ Upstream commit 44cf630bcb8c5ec78125805c9447dd5766792224 ]
We are seeing "imprecise external abort (0x1406)" errors during boot (which then cause the whole board to hang) on Meson8 (but not Meson8m2). These are observed while trying to access the GPU's registers when the MALI clock is running at it's default setting of 24MHz. The 3.10 vendor kernel uses 318.75MHz as "default" GPU frequency. Using that makes the "imprecise external aborts" go away. Add the assigned-clocks and assigned-clock-rates properties to also bump the MALI clock to 318.75MHz before accessing any of it's registers.
Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU") Reported-by: Demetris Ierokipides ierokipides.dem@gmail.com Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Reviewed-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Link: https://lore.kernel.org/r/20210711214023.2163565-1-martin.blumenstingl@googl... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/meson8.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 3efe9d41c2bb..d7c9dbee0f01 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -241,8 +241,13 @@ "pp2", "ppmmu2", "pp4", "ppmmu4", "pp5", "ppmmu5", "pp6", "ppmmu6"; resets = <&reset RESET_MALI>; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; clock-names = "bus", "core"; + + assigned-clocks = <&clkc CLKID_MALI>; + assigned-clock-rates = <318750000>; + operating-points-v2 = <&gpu_opp_table>; }; };