From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74 ]
A complicated deadlock exists when using the journal and an elevated group_thrtead_cnt. It was found with loop devices, but its not clear whether it can be seen with real disks. The deadlock can occur simply by writing data with an fio script.
When the deadlock occurs, multiple threads will hang in different ways:
1) The group threads will hang in the blk-wbt code with bios waiting to be submitted to the block layer:
io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 __submit_bio+0xe6/0x100 submit_bio_noacct_nocheck+0x42e/0x470 submit_bio_noacct+0x4c2/0xbb0 ops_run_io+0x46b/0x1a30 handle_stripe+0xcd3/0x36b0 handle_active_stripes.constprop.0+0x6f6/0xa60 raid5_do_work+0x177/0x330
Or: io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 __submit_bio+0xe6/0x100 submit_bio_noacct_nocheck+0x42e/0x470 submit_bio_noacct+0x4c2/0xbb0 flush_deferred_bios+0x136/0x170 raid5_do_work+0x262/0x330
2) The r5l_reclaim thread will hang in the same way, submitting a bio to the block layer:
io_schedule+0x70/0xb0 rq_qos_wait+0x153/0x210 wbt_wait+0x115/0x1b0 __rq_qos_throttle+0x38/0x60 blk_mq_submit_bio+0x589/0xcd0 __submit_bio+0xe6/0x100 submit_bio_noacct_nocheck+0x42e/0x470 submit_bio_noacct+0x4c2/0xbb0 submit_bio+0x3f/0xf0 md_super_write+0x12f/0x1b0 md_update_sb.part.0+0x7c6/0xff0 md_update_sb+0x30/0x60 r5l_do_reclaim+0x4f9/0x5e0 r5l_reclaim_thread+0x69/0x30b
However, before hanging, the MD_SB_CHANGE_PENDING flag will be set for sb_flags in r5l_write_super_and_discard_space(). This flag will never be cleared because the submit_bio() call never returns.
3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe() will do no processing on any pending stripes and re-set STRIPE_HANDLE. This will cause the raid5d thread to enter an infinite loop, constantly trying to handle the same stripes stuck in the queue.
The raid5d thread has a blk_plug that holds a number of bios that are also stuck waiting seeing the thread is in a loop that never schedules. These bios have been accounted for by blk-wbt thus preventing the other threads above from continuing when they try to submit bios. --Deadlock.
To fix this, add the same wait_event() that is used in raid5_do_work() to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will schedule and wait until the flag is cleared. The schedule action will flush the plug which will allow the r5l_reclaim thread to continue, thus preventing the deadlock.
However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING from the same thread and can thus deadlock if the thread is put to sleep. So avoid waiting if md_check_recovery() is being called in the loop.
It's not clear when the deadlock was introduced, but the similar wait_event() call in raid5_do_work() was added in 2017 by this commit:
16d997b78b15 ("md/raid5: simplfy delaying of writes while metadata is updated.")
Link: https://lore.kernel.org/r/7f3b87b6-b52a-f737-51d7-a4eec5c44112@deltatee.com Signed-off-by: Logan Gunthorpe logang@deltatee.com Signed-off-by: Song Liu song@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/raid5.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 6f04473f0838..cf021a7801d6 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -44,6 +44,7 @@ */
#include <linux/blkdev.h> +#include <linux/delay.h> #include <linux/kthread.h> #include <linux/raid/pq.h> #include <linux/async_tx.h> @@ -6329,7 +6330,18 @@ static void raid5d(struct md_thread *thread) spin_unlock_irq(&conf->device_lock); md_check_recovery(mddev); spin_lock_irq(&conf->device_lock); + + /* + * Waiting on MD_SB_CHANGE_PENDING below may deadlock + * seeing md_check_recovery() is needed to clear + * the flag when using mdmon. + */ + continue; } + + wait_event_lock_irq(mddev->sb_wait, + !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags), + conf->device_lock); } pr_debug("%d stripes handled\n", handled);