From: Erwan Le Ray erwan.leray@foss.st.com
[ Upstream commit f4518a8a75f5be1a121b0c95ad9c6b1eb27d920e ]
RX is configured, but usart is not enabled in startup function. Kernel documentation specifies that startup should enable the port for reception. Fix the startup by enabling usart for reception.
Fixes: 84872dc448fe ("serial: stm32: add RX and TX FIFO flush") Signed-off-by: Erwan Le Ray erwan.leray@foss.st.com Link: https://lore.kernel.org/r/20210304162308.8984-3-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/stm32-usart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 3d58824ac2af..c6ca8f964c69 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -634,6 +634,7 @@ static int stm32_usart_startup(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + const struct stm32_usart_config *cfg = &stm32_port->info->cfg; const char *name = to_platform_device(port->dev)->name; u32 val; int ret; @@ -658,7 +659,7 @@ static int stm32_usart_startup(struct uart_port *port) }
/* RX FIFO enabling */ - val = stm32_port->cr1_irq | USART_CR1_RE; + val = stm32_port->cr1_irq | USART_CR1_RE | BIT(cfg->uart_enable_bit); if (stm32_port->fifoen) val |= USART_CR1_FIFOEN; stm32_usart_set_bits(port, ofs->cr1, val);