Kernel message explanation:
* Description: * The FCP channel reported that its bit error threshold has been exceeded. * These errors might result from a problem with the physical components * of the local fibre link into the FCP channel. * The problem might be damage or malfunction of the cable or * cable connection between the FCP channel and * the adjacent fabric switch port or the point-to-point peer. * Find details about the errors in the HBA trace for the FCP device. * The zfcp device driver closed down the FCP device * to limit the performance impact from possible I/O command timeouts. * User action: * Check for problems on the local fibre link, ensure that fibre optics are * clean and functional, and all cables are properly plugged. * After the repair action, you can manually recover the FCP device by * writing "0" into its "failed" sysfs attribute. * If recovery through sysfs is not possible, set the CHPID of the device * offline and back online on the service element.
Signed-off-by: Steffen Maier maier@linux.ibm.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org #2.6.30+ Reviewed-by: Jens Remus jremus@linux.ibm.com Reviewed-by: Benjamin Block bblock@linux.ibm.com ---
Martin, James,
an important zfcp fix for v5.4-rc. It applies to Martin's 5.4/scsi-fixes or to James' fixes branch.
drivers/s390/scsi/zfcp_fsf.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 296bbc3c4606..cf63916814cc 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -27,6 +27,11 @@
struct kmem_cache *zfcp_fsf_qtcb_cache;
+static bool ber_stop = true; +module_param(ber_stop, bool, 0600); +MODULE_PARM_DESC(ber_stop, + "Shuts down FCP devices for FCP channels that report a bit-error count in excess of its threshold (default on)"); + static void zfcp_fsf_request_timeout_handler(struct timer_list *t) { struct zfcp_fsf_req *fsf_req = from_timer(fsf_req, t, timer); @@ -236,10 +241,15 @@ static void zfcp_fsf_status_read_handler(struct zfcp_fsf_req *req) case FSF_STATUS_READ_SENSE_DATA_AVAIL: break; case FSF_STATUS_READ_BIT_ERROR_THRESHOLD: - dev_warn(&adapter->ccw_device->dev, - "The error threshold for checksum statistics " - "has been exceeded\n"); zfcp_dbf_hba_bit_err("fssrh_3", req); + if (ber_stop) { + dev_warn(&adapter->ccw_device->dev, + "All paths over this FCP device are disused because of excessive bit errors\n"); + zfcp_erp_adapter_shutdown(adapter, 0, "fssrh_b"); + } else { + dev_warn(&adapter->ccw_device->dev, + "The error threshold for checksum statistics has been exceeded\n"); + } break; case FSF_STATUS_READ_LINK_DOWN: zfcp_fsf_status_read_link_down(req);