6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Beleswar Padhi b-padhi@ti.com
[ Upstream commit f3f11cfe890733373ddbb1ce8991ccd4ee5e79e1 ]
Acquire the mailbox handle during device probe and do not release handle in stop/detach routine or error paths. This removes the redundant requests for mbox handle later during rproc start/attach. This also allows to defer remoteproc driver's probe if mailbox is not probed yet.
Signed-off-by: Beleswar Padhi b-padhi@ti.com Link: https://lore.kernel.org/r/20240808074127.2688131-3-b-padhi@ti.com Signed-off-by: Mathieu Poirier mathieu.poirier@linaro.org Stable-dep-of: 8fa052c29e50 ("remoteproc: k3-r5: Delay notification of wakeup event") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/remoteproc/ti_k3_r5_remoteproc.c | 78 +++++++++--------------- 1 file changed, 30 insertions(+), 48 deletions(-)
diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c index 496a1c19a37e6..75bfe62736ab1 100644 --- a/drivers/remoteproc/ti_k3_r5_remoteproc.c +++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c @@ -189,6 +189,10 @@ static void k3_r5_rproc_mbox_callback(struct mbox_client *client, void *data) const char *name = kproc->rproc->name; u32 msg = omap_mbox_message(data);
+ /* Do not forward message from a detached core */ + if (kproc->rproc->state == RPROC_DETACHED) + return; + dev_dbg(dev, "mbox msg: 0x%x\n", msg);
switch (msg) { @@ -224,6 +228,10 @@ static void k3_r5_rproc_kick(struct rproc *rproc, int vqid) mbox_msg_t msg = (mbox_msg_t)vqid; int ret;
+ /* Do not forward message to a detached core */ + if (kproc->rproc->state == RPROC_DETACHED) + return; + /* send the index of the triggered virtqueue in the mailbox payload */ ret = mbox_send_message(kproc->mbox, (void *)msg); if (ret < 0) @@ -394,12 +402,9 @@ static int k3_r5_rproc_request_mbox(struct rproc *rproc) client->knows_txdone = false;
kproc->mbox = mbox_request_channel(client, 0); - if (IS_ERR(kproc->mbox)) { - ret = -EBUSY; - dev_err(dev, "mbox_request_channel failed: %ld\n", - PTR_ERR(kproc->mbox)); - return ret; - } + if (IS_ERR(kproc->mbox)) + return dev_err_probe(dev, PTR_ERR(kproc->mbox), + "mbox_request_channel failed\n");
/* * Ping the remote processor, this is only for sanity-sake for now; @@ -547,10 +552,6 @@ static int k3_r5_rproc_start(struct rproc *rproc) u32 boot_addr; int ret;
- ret = k3_r5_rproc_request_mbox(rproc); - if (ret) - return ret; - boot_addr = rproc->bootaddr; /* TODO: add boot_addr sanity checking */ dev_dbg(dev, "booting R5F core using boot addr = 0x%x\n", boot_addr); @@ -559,7 +560,7 @@ static int k3_r5_rproc_start(struct rproc *rproc) core = kproc->core; ret = ti_sci_proc_set_config(core->tsp, boot_addr, 0, 0); if (ret) - goto put_mbox; + return ret;
/* unhalt/run all applicable cores */ if (cluster->mode == CLUSTER_MODE_LOCKSTEP) { @@ -575,13 +576,12 @@ static int k3_r5_rproc_start(struct rproc *rproc) if (core != core0 && core0->rproc->state == RPROC_OFFLINE) { dev_err(dev, "%s: can not start core 1 before core 0\n", __func__); - ret = -EPERM; - goto put_mbox; + return -EPERM; }
ret = k3_r5_core_run(core); if (ret) - goto put_mbox; + return ret; }
return 0; @@ -591,8 +591,6 @@ static int k3_r5_rproc_start(struct rproc *rproc) if (k3_r5_core_halt(core)) dev_warn(core->dev, "core halt back failed\n"); } -put_mbox: - mbox_free_channel(kproc->mbox); return ret; }
@@ -653,8 +651,6 @@ static int k3_r5_rproc_stop(struct rproc *rproc) goto out; }
- mbox_free_channel(kproc->mbox); - return 0;
unroll_core_halt: @@ -669,42 +665,22 @@ static int k3_r5_rproc_stop(struct rproc *rproc) /* * Attach to a running R5F remote processor (IPC-only mode) * - * The R5F attach callback only needs to request the mailbox, the remote - * processor is already booted, so there is no need to issue any TI-SCI - * commands to boot the R5F cores in IPC-only mode. This callback is invoked - * only in IPC-only mode. + * The R5F attach callback is a NOP. The remote processor is already booted, and + * all required resources have been acquired during probe routine, so there is + * no need to issue any TI-SCI commands to boot the R5F cores in IPC-only mode. + * This callback is invoked only in IPC-only mode and exists because + * rproc_validate() checks for its existence. */ -static int k3_r5_rproc_attach(struct rproc *rproc) -{ - struct k3_r5_rproc *kproc = rproc->priv; - struct device *dev = kproc->dev; - int ret; - - ret = k3_r5_rproc_request_mbox(rproc); - if (ret) - return ret; - - dev_info(dev, "R5F core initialized in IPC-only mode\n"); - return 0; -} +static int k3_r5_rproc_attach(struct rproc *rproc) { return 0; }
/* * Detach from a running R5F remote processor (IPC-only mode) * - * The R5F detach callback performs the opposite operation to attach callback - * and only needs to release the mailbox, the R5F cores are not stopped and - * will be left in booted state in IPC-only mode. This callback is invoked - * only in IPC-only mode. + * The R5F detach callback is a NOP. The R5F cores are not stopped and will be + * left in booted state in IPC-only mode. This callback is invoked only in + * IPC-only mode and exists for sanity sake. */ -static int k3_r5_rproc_detach(struct rproc *rproc) -{ - struct k3_r5_rproc *kproc = rproc->priv; - struct device *dev = kproc->dev; - - mbox_free_channel(kproc->mbox); - dev_info(dev, "R5F core deinitialized in IPC-only mode\n"); - return 0; -} +static int k3_r5_rproc_detach(struct rproc *rproc) { return 0; }
/* * This function implements the .get_loaded_rsc_table() callback and is used @@ -1273,6 +1249,10 @@ static int k3_r5_cluster_rproc_init(struct platform_device *pdev) kproc->rproc = rproc; core->rproc = rproc;
+ ret = k3_r5_rproc_request_mbox(rproc); + if (ret) + return ret; + ret = k3_r5_rproc_configure_mode(kproc); if (ret < 0) goto err_config; @@ -1388,6 +1368,8 @@ static void k3_r5_cluster_rproc_exit(void *data) } }
+ mbox_free_channel(kproc->mbox); + rproc_del(rproc);
k3_r5_reserved_mem_exit(kproc);