5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xingui Yang yangxingui@huawei.com
[ Upstream commit 62413199cd6d2906c121c2dfa3d7b82fd05f08db ]
In case of SSP underflow allow the response frame IU to be examined for setting the response stat value rather than always setting SAS_DATA_UNDERRUN.
This will mean that we call sas_ssp_task_response() in those scenarios and may send sense data to upper layer.
Such a condition would be for bad blocks were we just reporting an underflow error to upper layer, but now the sense data will tell immediately that the media is faulty.
Link: https://lore.kernel.org/r/1645703489-87194-7-git-send-email-john.garry@huawe... Signed-off-by: Xingui Yang yangxingui@huawei.com Signed-off-by: Qi Liu liuqi115@huawei.com Signed-off-by: John Garry john.garry@huawei.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Stable-dep-of: f5393a5602ca ("scsi: hisi_sas: Fix normally completed I/O analysed as failed") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 39 +++++++++++++++++--------- 1 file changed, 26 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 9515ab66a7789..00f0847e1487a 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -405,6 +405,8 @@ #define CMPLT_HDR_ERROR_PHASE_MSK (0xff << CMPLT_HDR_ERROR_PHASE_OFF) #define CMPLT_HDR_RSPNS_XFRD_OFF 10 #define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF) +#define CMPLT_HDR_RSPNS_GOOD_OFF 11 +#define CMPLT_HDR_RSPNS_GOOD_MSK (0x1 << CMPLT_HDR_RSPNS_GOOD_OFF) #define CMPLT_HDR_ERX_OFF 12 #define CMPLT_HDR_ERX_MSK (0x1 << CMPLT_HDR_ERX_OFF) #define CMPLT_HDR_ABORT_STAT_OFF 13 @@ -2136,7 +2138,7 @@ static irqreturn_t fatal_axi_int_v3_hw(int irq_no, void *p) return IRQ_HANDLED; }
-static void +static bool slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task, struct hisi_sas_slot *slot) { @@ -2154,6 +2156,15 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task, switch (task->task_proto) { case SAS_PROTOCOL_SSP: if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) { + /* + * If returned response frame is incorrect because of data underflow, + * but I/O information has been written to the host memory, we examine + * response IU. + */ + if (!(complete_hdr->dw0 & CMPLT_HDR_RSPNS_GOOD_MSK) && + (complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK)) + return false; + ts->residual = trans_tx_fail_type; ts->stat = SAS_DATA_UNDERRUN; } else if (dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) { @@ -2185,6 +2196,7 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task, default: break; } + return true; }
static void slot_complete_v3_hw(struct hisi_hba *hisi_hba, @@ -2259,19 +2271,20 @@ static void slot_complete_v3_hw(struct hisi_hba *hisi_hba, if ((dw0 & CMPLT_HDR_CMPLT_MSK) == 0x3) { u32 *error_info = hisi_sas_status_buf_addr_mem(slot);
- slot_err_v3_hw(hisi_hba, task, slot); - if (ts->stat != SAS_DATA_UNDERRUN) - dev_info(dev, "erroneous completion iptt=%d task=%pK dev id=%d addr=%016llx CQ hdr: 0x%x 0x%x 0x%x 0x%x Error info: 0x%x 0x%x 0x%x 0x%x\n", - slot->idx, task, sas_dev->device_id, - SAS_ADDR(device->sas_addr), - dw0, dw1, complete_hdr->act, dw3, - error_info[0], error_info[1], - error_info[2], error_info[3]); - if (unlikely(slot->abort)) { - sas_task_abort(task); - return; + if (slot_err_v3_hw(hisi_hba, task, slot)) { + if (ts->stat != SAS_DATA_UNDERRUN) + dev_info(dev, "erroneous completion iptt=%d task=%pK dev id=%d addr=%016llx CQ hdr: 0x%x 0x%x 0x%x 0x%x Error info: 0x%x 0x%x 0x%x 0x%x\n", + slot->idx, task, sas_dev->device_id, + SAS_ADDR(device->sas_addr), + dw0, dw1, complete_hdr->act, dw3, + error_info[0], error_info[1], + error_info[2], error_info[3]); + if (unlikely(slot->abort)) { + sas_task_abort(task); + return; + } + goto out; } - goto out; }
switch (task->task_proto) {